paparazzi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] Issue with Body_to_Imu and DCM


From: Felix Ruess
Subject: Re: [Paparazzi-devel] Issue with Body_to_Imu and DCM
Date: Wed, 15 Feb 2012 12:04:59 +0100

Hi Jochen,

what AHRS algo are you referring to?
http://paparazzi.enac.fr/wiki/Subsystem/ahrs has the current status
So if you are on the dev branch, you are fine using int_cmpl_quat, it will deal with all BODY_TO_IMU rotations correctly.

float_dcm does not handle this correctly, patches are welcome! 
But due to limited time, I'm not going to fix that one. I would recommend to use int_cmpl_quat anyway.

Cheers, Felix

On Wed, Feb 15, 2012 at 9:44 AM, Jochen Rieger <address@hidden> wrote:
Hello, in my airframe, i need to turn the board on the z axis.

I set the angle in the airframe file to:

     <define name="BODY_TO_IMU_PHI"   value="RadOfDeg( 0. )"/>
    <define name="BODY_TO_IMU_THETA" value="RadOfDeg( 0. )"/>
    <define name="BODY_TO_IMU_PSI"   value="RadOfDeg( 90. )"/>

It is possible that i will have problems?
Because in the wiki there are problems with Body_to_imu and the AHRS.

Also the USE_MAGNETOMETER is not tested, current status?

Thanks for informations.

Regards.
-Jochen


_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel



reply via email to

[Prev in Thread] Current Thread [Next in Thread]