Prof. Dr.-Ing. Heinrich Warmers schrieb:
Dear Christophe,
tanks for the information.
We use 868 MHz and will test the ACT-reciever from Mikrokopter.
Regards
Heinrich
Christophe De Wagter schrieb:
The
Penta Profi is not a good receiver in the presence of noise. E.g. with
our 868MHz longrange modems we start getting very significant
interference at 100m and at 300m loose control. Other receivers like
the one they sell at mikrokopter are far less sensitive to this.
-Christophe
On Wed, Aug 17, 2011 at 10:17 PM, Prof.
Dr.-Ing. Heinrich Warmers <address@hidden>
wrote:
Hi,
we are flying the following configuration:
Graupner MC22 (9 channel impulses),
Profi Penta RC- receiver,
Tiny13,
25A Hype bruschless controller,
3 Hitec digital servos.
In manual and auto1 mode we lost often and sporadic the control over
the aircraft.
The result is a crash.
It seems that the servos make maximum ways and the neutral setting is
wrong.
For a configuration with:
Tworg,
MC16/20 and MC15 (8 channel impulses),
Hitec-RC-reciever and
2 Hitec analog servos
we have never seen a malfunction.
Has someone a idea how we can find the error?
Regards
Heinrich Warmers
_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
|