[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Mldonkey-bugs] [Bug #503] Upload limitation does not work
From: |
nobody |
Subject: |
[Mldonkey-bugs] [Bug #503] Upload limitation does not work |
Date: |
Mon, 16 Sep 2002 15:30:38 -0400 |
=================== BUG #503: LATEST MODIFICATIONS ==================
http://freesoftware.fsf.org/bugs/?func=detailbug&bug_id=503&group_id=1409
Changes by: mldonkey admin <address@hidden>
Date: 2002-Sep-16 19:30 (GMT)
What | Removed | Added
---------------------------------------------------------------------------
Category | None | Core
Severity | 5 - Major | 6
Resolution | None | Remind
Assigned to | None | mldonkey
------------------ Additional Follow-up Comments ----------------------------
Don't forget these options are in kB/s and not kb/s
Next CVS snapshot will indicate in the GUI the uploaded/downloaded bytes.
=================== BUG #503: FULL BUG SNAPSHOT ===================
Submitted by: None Project: mldonkey, a free e-Donkey
client
Submitted on: 2002-May-29 20:45
Category: Core Severity: 6
Bug Group: None Resolution: Remind
Assigned to: mldonkey Status: Open
Summary: Upload limitation does not work
Original Submission: Hi,
I live in Germany and can only upstream with 16KB/s (capped by the German
Telekom).
And if I set my mldonkey-upstream to 15 I am experiencing the problem, that
mldonkey does not stick to its limitation, it always tries tries to send more
than it can send and my Provider then allways disconnects me.
I am using mldonkey 1.16
Follow-up Comments
*******************
-------------------------------------------------------
Date: 2002-Sep-16 19:30 By: mldonkey
Don't forget these options are in kB/s and not kb/s
Next CVS snapshot will indicate in the GUI the uploaded/downloaded bytes.
-------------------------------------------------------
Date: 2002-Sep-16 06:39 By: None
Hi
I use the same provider, and limitated my bandwith in mld 1.16 to 80/10 k/s,
and it works pretty fine.
However, from time to time, my mld seems not to update his serverlist after
restart (although 4 .met's are in the downloads.ini), and starts starving
around with about 40 servers.
So i used the mld 1.99 beta5 core (just because of the nice windows-gui that's
around),and now it seems to me that mld 1.99 has severe problems with bandwith
limitation.
mld1.99 always seems to suck up the whole downstream bandwith, no matter which
limit is set.As my linuxserver is used as a router to, it comes extremely
unhandy that there's almost no downstream bandbwith available (even
smallhonkclients like irc or icq can't connect to their servers - same applies
to the browsers.)
have a nice day
mux
-------------------------------------------------------
Date: 2002-Sep-05 12:29 By: None
I have it too, it´s fucked up, because my hole house is on a router, and when
mldonkey is running, the other computers can´t surf in the Internet!!!!
Alex
-------------------------------------------------------
Date: 2002-Jul-22 08:46 By: Netgrabber
I have the same problem!
-------------------------------------------------------
Date: 2002-Jun-14 01:47 By: jzl60
Got the same problem. I temporarily fixed this with a smart router (Basically,
I drop incoming frames when the bandwidth limit is reached). This is not the
right/intelligent way of doing it. I would really like to get this one fixed.
Joel
-------------------------------------------------------
Date: 2002-Jun-09 00:01 By: Janus666
y0, got t-dsl too and have the same prob
got upload on 12K/Sec but its streaming more than 16K/Sec
:/ fix that plz
-------------------------------------------------------
Date: 2002-Jun-09 00:01 By: Janus666
y0, got t-dsl too and have the same prob
got upload on 12K/Sec but its streaming more than 16K/Sec
:/ fix that plz
-------------------------------------------------------
Date: 2002-Jun-08 23:56 By: Janus666
y0, got t-dsl too and have the same prob
got upload on 12K/Sec but its streaming more than 16K/Sec
:/ fix that plz
CC list is empty
No files currently attached
For detailed info, follow this link:
http://freesoftware.fsf.org/bugs/?func=detailbug&bug_id=503&group_id=1409