Hi,
i have build linphone with codec2 support and i have enable in both devices .i can make call using it but when call is answered linphone stucks after 30 secs.
followings are log from call debug:
11-02 12:04:17.413 21901-21901/org.linphone I/Linphone: Setting audio encoder network bitrate to [20000] on stream [0xb9d4ec60]
11-02 12:04:17.413 21901-21901/org.linphone I/Linphone: codec2 : set bit rate to 20000 : bit_rate 4000 max_network 20000
11-02 12:04:17.418 21901-21901/org.linphone I/Linphone: This device (motorola/MotoE2(4G-LTE)/msm8916) says it has no built-in echo canceller.
11-02 12:04:17.418 21901-21901/org.linphone I/Linphone: No information available for [motorola/MotoE2(4G-LTE)/msm8916],
11-02 12:04:17.418 21901-21901/org.linphone I/Linphone: Sound device information for [motorola/MotoE2(4G-LTE)/msm8916] is: builtin=[no], delay=[250] ms
11-02 12:04:17.421 21901-21901/org.linphone I/Linphone: This device (motorola/MotoE2(4G-LTE)/msm8916) says it has no built-in echo canceller.
11-02 12:04:17.422 21901-21901/org.linphone I/Linphone: No information available for [motorola/MotoE2(4G-LTE)/msm8916],
11-02 12:04:17.425 21901-21901/org.linphone E/Linphone: Filter MSCodec2Enc does not implement the MS_FILTER_GET_NCHANNELS method
11-02 12:04:17.425 21901-21901/org.linphone I/Linphone: configuring MSOpenSLESRecorder:0xb9b66348-->MSCodec2Enc:0xb98b8718 from rate [48000] to rate [8000] and from channel [1] to channel [1]
11-02 12:04:17.425 21901-21901/org.linphone E/Linphone: Filter MSCodec2Dec does not implement the MS_FILTER_GET_NCHANNELS method
11-02 12:04:17.425 21901-21901/org.linphone E/Linphone: Filter MSCodec2Dec does not implement the MS_FILTER_GET_SAMPLE_RATE method
11-02 12:16:23.970 31119-31119/org.linphone I/Linphone: First estimation
11-02 12:16:23.970 31119-31119/org.linphone I/Linphone: Bandwidth usage for call [0xb9cd55a8]:
RTP audio=[d= 0.0,u= 0.0], video=[d= 0.0,u= 0.0, ed= 0.0], text=[d= 0.0,u= 0.0] kbits/sec
RTCP audio=[d= 0.0,u= 0.0], video=[d= 0.0,u= 0.0], text=[d= 0.0,u= 0.0] kbits/sec
11-02 12:16:23.970 31119-31119/org.linphone I/Linphone: Thread processing load: audio=0.621605 video=0.000000 text=0.000000
11-02 12:16:23.971 31119-31119/org.linphone I/Linphone: Vtable [0xb9c74640] unregistered on core [0xb98ffcf8]
11-02 12:16:23.971 31119-31119/org.linphone I/Linphone: Vtable [0xb9c366b8] unregistered on core [0xb98ffcf8]
11-02 12:16:23.971 31119-31119/org.linphone I/Linphone: Activity paused:address@hidden
11-02 12:16:23.971 31119-31119/org.linphone I/Linphone: runningActivities=0
11-02 12:16:23.974 31119-926/org.linphone W/Linphone: Getting reference signal but no echo to synchronize on.
11-02 12:16:23.974 31119-926/org.linphone I/Linphone: MSAudioMixer [0xb9c233f8] is entering bypass mode.
11-02 12:16:23.980 31119-31119/org.linphone I/Linphone: Activity created:address@hidden
11-02 12:16:23.985 31119-926/org.linphone W/Linphone: Getting reference signal but no echo to synchronize on.11-02 12:16:24.065 31119-926/org.linphone W/Linphone: Not enough ref samples, using zeroes
11-02 12:16:24.140 31119-31119/org.linphone I/Linphone: Activity started:address@hidden
11-02 12:16:23.994 31119-926/org.linphone W/Linphone: Getting reference signal but no echo to synchronize on.
i am not getting any voice from both side and i can't find MSCodec2Dec or MSCodec2Enc error in source ,so kindly provide information regarding this issue and what is the cause of it?
Thanks and regards,
Mayur Viras
Jr.software Developer
| Ecosmob Technologies Pvt. Ltd. |
|