[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: How to tell libtool to have/work with one of [.lo|.o] file ( if poss
From: |
Jeff Dubrule |
Subject: |
Re: How to tell libtool to have/work with one of [.lo|.o] file ( if possible ) |
Date: |
Thu, 6 Feb 2003 09:01:08 -0500 |
User-agent: |
Mutt/1.4i |
On Wed, Feb 05, 2003 at 05:09:14PM -0600, Bob Friesenhahn wrote:
> Unfortunately, there is a design problem with libtool. There should
> be libtool command-line switches to support this, but instead these
> options must be set when libtool is configured. These options are set
> via an autoconf configure script. If you are using an already
> installed libtool then you are out of luck.
I thought:
libtool --mode=compile -prefer-pic/-prefer-non-pic
would do the trick?
This'll at least work for the compile stage, does this get you into
trouble at the link stage?
At the very least, I think you can add -prefer-non-pic to your compile
flags, and -static to your link flags while developing, and only do
the static thing.
Hope this helps,
-jeff