[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Gnumed-bugs] Fwd: [Gnumed-devel] <bug>: Just trying to close.
From: |
James Busser |
Subject: |
[Gnumed-bugs] Fwd: [Gnumed-devel] <bug>: Just trying to close. |
Date: |
Fri, 03 Oct 2008 22:03:17 -0700 |
Begin forwarded message:
From: address@hidden
Date: October 1, 2008 9:50:44 AM PDT (CA)
To: address@hidden
Subject: [Gnumed-devel] <bug>: Just trying to close.
Report sent via GNUmed's handler for unexpected exceptions:
Just trying to close.
2008-09-30 16:37:32
------------------------------------------------------------
2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmLog.py:address@hidden): SECURITY: initial log level
is [INFO]
2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmLog.py:address@hidden): instantiated
log file [/home/kyle/.gnumed/gnumed.log] with ID [/home/kyle/.gnumed/
gnumed.log]
2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmTools.py:<module>@24): $Revision: 1.43 $
2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmLog.py:address@hidden): SECURITY: log level
change from [INFO] to [DATA]
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCLI.py:<module>@140): $Revision: 1.3 $
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCLI.py:address@hidden): unparsed command
line is >>/var/lib/python-support/python2.5/Gnumed/wxpython/gnumed.py<<
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCLI.py:address@hidden): command line arguments: {}
2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:<module>@57): $Revision: 1.33 $
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden): unmodified
startup locale settings (should be [C])
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden): current locale
settings:
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.get_locale(): (None, None)
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.get_locale(LC_NUMERIC): (None, None)
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.get_locale(LC_MESSAGES): (None, None)
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.get_locale(LC_MONETARY): (None, None)
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.get_locale(LC_COLLATE): (None, None)
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.get_locale(LC_CTYPE): (None, None)
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.get_locale(LC_TIME): (None, None)
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
(locale.set_locale(LC_NUMERIC): C)
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
(locale.set_locale(LC_MESSAGES): C)
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
(locale.set_locale(LC_MONETARY): C)
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
(locale.set_locale(LC_COLLATE): C)
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
(locale.set_locale(LC_CTYPE): C)
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
(locale.set_locale(LC_ALL): C)
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
(locale.set_locale(LC_TIME): C)
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.getdefaultlocale() - default (user) locale: ('en_US', 'UTF8')
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden): encoding
sanity check (also check "locale.nl_langinfo(CODESET)" below):
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
sys.getdefaultencoding(): [ascii]
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.getpreferredencoding(): [ANSI_X3.4-1968]
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.getlocale()[1]: [None]
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
sys.getfilesystemencoding(): [UTF-8]
2008-09-30 16:37:32 [WARN] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden): encoding
suggested by locale (ANSI_X3.4-1968) does not match encoding
currently set in locale (None)
2008-09-30 16:37:32 [WARN] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden): this might
lead to encoding errors
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden): <codecs>
module CAN handle encoding [ANSI_X3.4-1968]
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden): <codecs>
module CAN handle encoding [ascii]
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden): <codecs>
module CAN handle encoding [UTF-8]
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden): on Linux you
can determine a likely candidate for the encoding by running "locale
charmap"
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden): locale related
environment variables (${LANG} is typically used):
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden): ${LANGUAGE}
not set
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden): ${LC_ALL} not set
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden): ${LC_CTYPE}
not set
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden): ${LANG}
=en_US.UTF-8
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden): database of
locale conventions:
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.localeconv(mon_decimal_point):
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.localeconv(int_frac_digits): 127
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.localeconv(p_sep_by_space): 127
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.localeconv(frac_digits): 127
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.localeconv(thousands_sep):
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.localeconv(n_sign_posn): 127
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.localeconv(decimal_point): .
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.localeconv(int_curr_symbol):
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.localeconv(n_cs_precedes): 127
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.localeconv(p_sign_posn): 127
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.localeconv(mon_thousands_sep):
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.localeconv(negative_sign):
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.localeconv(currency_symbol):
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.localeconv(n_sep_by_space): 127
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.localeconv(mon_grouping): []
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.localeconv(p_cs_precedes): 127
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.localeconv(positive_sign):
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.localeconv(grouping): []
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.nl_langinfo(D_FMT): %m/%d/%y
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.nl_langinfo(D_T_FMT): %a %b %e %H:%M:%S %Y
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.nl_langinfo(YESEXPR): ^[yY]
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.nl_langinfo(ALT_DIGITS):
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.nl_langinfo(T_FMT_AMPM): %I:%M:%S %p
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.nl_langinfo(RADIXCHAR): .
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.nl_langinfo(ERA_D_FMT):
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.nl_langinfo(T_FMT): %H:%M:%S
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.nl_langinfo(NOEXPR): ^[nN]
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.nl_langinfo(CRNCYSTR): -
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.nl_langinfo(ERA):
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.nl_langinfo(CODESET): ANSI_X3.4-1968
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.nl_langinfo(THOUSEP):
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.nl_langinfo(ERA_D_T_FMT):
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden): activating user-
default locale with <locale.setlocale(locale.LC_ALL, '')> returns:
[en_US.UTF-8]
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden): locale
settings after activating user-default locale
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden): current locale
settings:
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.get_locale(): ('en_US', 'UTF8')
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.get_locale(LC_NUMERIC): ('en_US', 'UTF8')
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.get_locale(LC_MESSAGES): ('en_US', 'UTF8')
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.get_locale(LC_MONETARY): ('en_US', 'UTF8')
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.get_locale(LC_COLLATE): ('en_US', 'UTF8')
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.get_locale(LC_CTYPE): ('en_US', 'UTF8')
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.get_locale(LC_TIME): ('en_US', 'UTF8')
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
(locale.set_locale(LC_NUMERIC): en_US.UTF-8)
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
(locale.set_locale(LC_MESSAGES): en_US.UTF-8)
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
(locale.set_locale(LC_MONETARY): en_US.UTF-8)
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
(locale.set_locale(LC_COLLATE): en_US.UTF-8)
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
(locale.set_locale(LC_CTYPE): en_US.UTF-8)
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
(locale.set_locale(LC_ALL): en_US.UTF-8)
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
(locale.set_locale(LC_TIME): en_US.UTF-8)
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.getdefaultlocale() - default (user) locale: ('en_US', 'UTF8')
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden): encoding
sanity check (also check "locale.nl_langinfo(CODESET)" below):
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
sys.getdefaultencoding(): [ascii]
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.getpreferredencoding(): [UTF-8]
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.getlocale()[1]: [UTF8]
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
sys.getfilesystemencoding(): [UTF-8]
2008-09-30 16:37:32 [WARN] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden): encoding
suggested by locale (UTF-8) does not match encoding currently set in
locale (UTF8)
2008-09-30 16:37:32 [WARN] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden): this might
lead to encoding errors
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden): <codecs>
module CAN handle encoding [UTF-8]
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden): <codecs>
module CAN handle encoding [UTF8]
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden): <codecs>
module CAN handle encoding [ascii]
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden): <codecs>
module CAN handle encoding [UTF-8]
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden): on Linux you
can determine a likely candidate for the encoding by running "locale
charmap"
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden): locale related
environment variables (${LANG} is typically used):
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden): ${LANGUAGE}
not set
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden): ${LC_ALL} not set
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden): ${LC_CTYPE}
not set
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden): ${LANG}
=en_US.UTF-8
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden): database of
locale conventions:
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.localeconv(mon_decimal_point): .
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.localeconv(int_frac_digits): 2
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.localeconv(p_sep_by_space): 0
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.localeconv(frac_digits): 2
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.localeconv(thousands_sep): ,
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.localeconv(n_sign_posn): 1
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.localeconv(decimal_point): .
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.localeconv(int_curr_symbol): USD
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.localeconv(n_cs_precedes): 1
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.localeconv(p_sign_posn): 1
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.localeconv(mon_thousands_sep): ,
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.localeconv(negative_sign): -
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.localeconv(currency_symbol): $
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.localeconv(n_sep_by_space): 0
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.localeconv(mon_grouping): [3, 3, 0]
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.localeconv(p_cs_precedes): 1
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.localeconv(positive_sign):
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.localeconv(grouping): [3, 3, 0]
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.nl_langinfo(D_FMT): %m/%d/%Y
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.nl_langinfo(D_T_FMT): %a %d %b %Y %r %Z
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.nl_langinfo(YESEXPR): ^[yY].*
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.nl_langinfo(ALT_DIGITS):
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.nl_langinfo(T_FMT_AMPM): %I:%M:%S %p
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.nl_langinfo(RADIXCHAR): .
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.nl_langinfo(ERA_D_FMT):
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.nl_langinfo(T_FMT): %r
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.nl_langinfo(NOEXPR): ^[nN].*
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.nl_langinfo(CRNCYSTR): -$
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.nl_langinfo(ERA):
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.nl_langinfo(CODESET): UTF-8
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.nl_langinfo(THOUSEP): ,
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden):
locale.nl_langinfo(ERA_D_T_FMT):
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden): splitting
canonical locale [en_US] into levels
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden): system
locale levels: {'country': 'en_US', 'full': 'en_US', 'language': 'en'}
2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden): text domain is [gnumed]
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden): searching message
catalog file for system locale [en_US]
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden): ${LANGUAGE} = [None]
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden): ${LC_ALL} = [None]
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden): ${LC_MESSAGES} = [None]
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden): ${LANG} = [en_US.UTF-8]
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden): system is POSIX,
looking in standard locations (see Python Manual)
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden): looking at ${GNUMED_DIR}
2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden): ${GNUMED_DIR} not set
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden): looking above binary
install directory [/var/lib/python-support/python2.5/Gnumed/locale]
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden): looking in binary
install directory [/var/lib/python-support/python2.5/Gnumed/wxpython/
locale]
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden): trying [/usr/share/
locale](/en_US/LC_MESSAGES/gnumed.mo)
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden): does not translate:
[translate this or i18n will not work properly !] => [translate this
or i18n will not work properly !]
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden): trying [/var/lib/
python-support/python2.5/Gnumed/locale](/en_US/LC_MESSAGES/gnumed.mo)
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden): trying [/var/lib/
python-support/python2.5/Gnumed/wxpython/locale](/en_US/LC_MESSAGES/
gnumed.mo)
2008-09-30 16:37:32 [WARN] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmI18N.py:address@hidden): Giving up and falling
back to NullTranslations() class in despair.
2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gnumed.py:<module>@268): Starting up as main module
($Revision: 1.123.2.1 $).
2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gnumed.py:<module>@269): command line is: {}
2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gnumed.py:<module>@270): Python 2.5.2 (r252:60911,
Jul 31 2008, 17:28:52)
[GCC 4.2.3 (Ubuntu 4.2.3-2ubuntu7)] on linux2 (posix)
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmTools.py:address@hidden): wxPython not available
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmTools.py:address@hidden): local application base
dir: /var/lib/python-support/python2.5/Gnumed
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmTools.py:address@hidden): current working dir: /
home/kyle
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmTools.py:address@hidden): user home dir: /home/kyle
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmTools.py:address@hidden): user-specific config
dir: /home/kyle/.gnumed
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmTools.py:address@hidden): system-wide config
dir: /etc/gnumed
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmTools.py:address@hidden): system-wide application
data dir: /usr/share/gnumed
2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmDateTime.py:<module>@59): $Revision: 1.14 $
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmDateTime.py:address@hidden): mx.DateTime.now():
[2008-09-30 16:37:32.29]
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmDateTime.py:address@hidden): datetime.now() :
[2008-09-30 16:37:32.298003]
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmDateTime.py:address@hidden): time.localtime() : [(2008,
9, 30, 16, 37, 32, 1, 274, 1)]
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmDateTime.py:address@hidden): time.gmtime() : [(2008,
9, 30, 23, 37, 32, 1, 274, 0)]
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmDateTime.py:address@hidden): $TZ not defined
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmDateTime.py:address@hidden): time.daylight: [1] (whether
or not DST is locally used at all)
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmDateTime.py:address@hidden): time.timezone: [28800] seconds
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmDateTime.py:address@hidden): time.altzone : [25200] seconds
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmDateTime.py:address@hidden): time.tzname : [PST / PDT]
(non-DST / DST)
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmDateTime.py:address@hidden): mx.DateTime.now().gmtoffset
(): [-07:00:00.00]
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmDateTime.py:address@hidden): DST currently in effect:
[True]
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmDateTime.py:address@hidden): DST currently in effect,
using UTC offset of [-25200] seconds instead of [-28800] seconds
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmDateTime.py:address@hidden): UTC offset is negative,
assuming WEST of Greenwich ("clock is behind")
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmDateTime.py:address@hidden): ISO timezone:
[-07:00:00.00] (taken from mx.DateTime.now().gmtoffset())
2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmTools.py:address@hidden):
appending to sys.path: [/home/kyle/.gnumed/scripts]
2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmTools.py:address@hidden):
imported module [hook_script] as [<module 'hook_script' from '/home/
kyle/.gnumed/scripts/hook_script.pyc'>]
2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmPG2.py:<module>@30): $Revision: 1.63.2.1 $
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmPG2.py:<module>@41): psycopg2 version: 2.0.6 (dec
mx dt ext pq3)
2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmPG2.py:<module>@42): PostgreSQL via DB-API module
"<module 'psycopg2' from '/usr/lib/python2.5/site-packages/psycopg2/
__init__.pyc'>": API level 2.0, thread safety 2, parameter style
"pyformat"
2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmPG2.py:<module>@69): assuming default client
encoding of [UTF8]
2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmPG2.py:<module>@75): assuming default client time
zone of [-07:00:00.00]
2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:<module>@77): $Revision: 1.54.8.1 $
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): (<aDir=None>,
<aName=None>)
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): No config file given
on command line. Format: --conf-file=<config file>
2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): $GNUMED_DIR not set
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): config file search
order: ['/home/kyle/.gnumed/gnumed.conf', '/home/kyle/.gnumed.conf',
'/etc/gnumed/gnumed.conf', '/etc/gnumed.conf', '/var/lib/python-
support/python2.5/Gnumed/wxpython/gnumed.conf', '/var/lib/python-
support/python2.5/Gnumed/wxpython/../etc/gnumed.conf']
2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): found config file [/
home/kyle/.gnumed/gnumed.conf]
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): parsing config file
[/home/kyle/.gnumed/gnumed.conf]
2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmShellAPI.py:<module>@22): $Revision: 1.2 $
2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmBackendListener.py:<module>@20): $Revision: 1.12 $
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:<module>@33): $Revision: 1.76.2.1 $
2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmBusinessDBObject.py:<module>@143): $Revision: 1.46 $
2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmMimeLib.py:<module>@21): $Revision: 1.14 $
2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/
Gnumed/business/gmMedDoc.py:<module>@21): $Revision: 1.100 $
2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/
Gnumed/business/gmDemographicRecord.py:<module>@30): $Revision: 1.93 $
2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/
Gnumed/business/gmAllergy.py:<module>@18): $Revision: 1.28 $
2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/
Gnumed/business/gmClinNarrative.py:<module>@18): $Revision: 1.27 $
2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/
Gnumed/business/gmEMRStructItems.py:<module>@19): $Revision: 1.103 $
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/business/gmClinicalRecord.py:<module>@44): $Revision: 1.252 $
2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/
Gnumed/business/gmPerson.py:<module>@26): $Revision: 1.146.2.5 $
2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmPlugin.py:<module>@24): $Revision: 1.75 $
2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmPatPicWidgets.py:<module>@30): $Revision: 1.28 $
2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/
Gnumed/business/gmKVK.py:<module>@26): $Revision: 1.16.2.1 $
2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmDataMiningWidgets.py:<module>@29): $Revision: 1.6 $
2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmAuthWidgets.py:<module>@31): $Revision: 1.2.2.3 $
2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmPatSearchWidgets.py:<module>@31): $Revision:
1.97.2.2 $
2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmAllergyWidgets.py:<module>@24): $Revision: 1.28.2.1 $
2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmTopPanel.py:<module>@19): $Revision: 1.89 $
2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmHorstSpace.py:<module>@34): $Revision: 1.40 $
2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/
Gnumed/exporters/gmPatientExporter.py:<module>@30): $Revision:
1.109.2.1 $
2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmEMRStructWidgets.py:<module>@37): $Revision:
1.71.2.2 $
2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmResizingWidgets.py:<module>@23): $Revision: 1.48 $
2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmSOAPWidgets.py:<module>@22): $Revision: 1.95.2.2 $
2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmNarrativeWidgets.py:<module>@24): $Revision: 1.6 $
2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmEMRBrowser.py:<module>@24): $Revision: 1.81 $
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmStaffWidgets.py:<module>@23): $Revision: 1.17.2.1 $
2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmMedDocWidgets.py:<module>@24): $Revision: 1.150.2.2 $
2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/
Gnumed/business/gmForms.py:<module>@25): $Revision: 1.55.2.1 $
2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmFormWidgets.py:<module>@24): $Revision: 1.7 $
2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmProviderInboxWidgets.py:<module>@24): $Revision:
1.19.2.2 $
2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiMain.py:<module>@68): $Revision: 1.375.2.17 $
2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiMain.py:<module>@69): wxPython GUI framework:
2.6.3.2 ('__WXGTK__', 'wxGTK', 'unicode', 'gtk2', 'wx-assertions-
off', 'SWIG-1.3.27')
2008-09-30 16:37:32 [WARN] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): group [backend] not found
2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiMain.py:<module>@80): GNUmed client version
[v0.2.8.10]
2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiMain.py:<module>@81): expected database version
[v8]
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): (<aDir=None>, <aName=/
home/kyle/gnumed.conf>)
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): No config file given
on command line. Format: --conf-file=<config file>
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): config file search
order: ['/home/kyle/gnumed.conf']
2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): config file [/home/
kyle/gnumed.conf] not found
2008-09-30 16:37:32 [ERROR] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): cannot find config
file in any of the standard paths
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): (<aDir=None>, <aName=/
var/lib/python-support/python2.5/Gnumed/gnumed.conf>)
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): No config file given
on command line. Format: --conf-file=<config file>
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): config file search
order: ['/var/lib/python-support/python2.5/Gnumed/gnumed.conf']
2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): config file [/var/lib/
python-support/python2.5/Gnumed/gnumed.conf] not found
2008-09-30 16:37:32 [ERROR] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): cannot find config
file in any of the standard paths
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): (<aDir=None>, <aName=/
home/kyle/.gnumed/gnumed.conf>)
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): No config file given
on command line. Format: --conf-file=<config file>
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): config file search
order: ['/home/kyle/.gnumed/gnumed.conf']
2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): found config file [/
home/kyle/.gnumed/gnumed.conf]
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): parsing config file
[/home/kyle/.gnumed/gnumed.conf]
2008-09-30 16:37:32 [WARN] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): group [workplace] not found
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): (<aDir=None>, <aName=/
etc/gnumed/gnumed-client.conf>)
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): No config file given
on command line. Format: --conf-file=<config file>
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): config file search
order: ['/etc/gnumed/gnumed-client.conf']
2008-09-30 16:37:32 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): config file [/etc/
gnumed/gnumed-client.conf] not found
2008-09-30 16:37:32 [ERROR] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): cannot find config
file in any of the standard paths
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmTools.py:address@hidden): local application base
dir: /var/lib/python-support/python2.5/Gnumed
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmTools.py:address@hidden): current working dir: /
home/kyle
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmTools.py:address@hidden): user home dir: /home/kyle
2008-09-30 16:37:32 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmTools.py:address@hidden): user-specific config
dir: /home/kyle/.gnumed
2008-09-30 16:37:33 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmTools.py:address@hidden): system-wide config
dir: /etc
2008-09-30 16:37:33 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmTools.py:address@hidden): system-wide application
data dir: /usr/share/gnumed
2008-09-30 16:37:33 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): (<aDir=None>, <aName=/
home/kyle/.gnumed/gnumed.conf>)
2008-09-30 16:37:33 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): ignoring command line
per cfg_IGNORE_CMD_LINE
2008-09-30 16:37:33 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): config file search
order: [u'/home/kyle/.gnumed/gnumed.conf']
2008-09-30 16:37:33 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): found config file [/
home/kyle/.gnumed/gnumed.conf]
2008-09-30 16:37:33 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): parsing config file
[/home/kyle/.gnumed/gnumed.conf]
2008-09-30 16:37:33 [INFO] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiMain.py:address@hidden): running on GTK
(probably Linux)
2008-09-30 16:37:33 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): (<aDir=None>, <aName=/
home/kyle/gnumed.conf>)
2008-09-30 16:37:33 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): No config file given
on command line. Format: --conf-file=<config file>
2008-09-30 16:37:33 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): config file search
order: ['/home/kyle/gnumed.conf']
2008-09-30 16:37:33 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): config file [/home/
kyle/gnumed.conf] not found
2008-09-30 16:37:33 [ERROR] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): cannot find config
file in any of the standard paths
2008-09-30 16:37:33 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): (<aDir=None>, <aName=/
var/lib/python-support/python2.5/Gnumed/gnumed.conf>)
2008-09-30 16:37:33 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): No config file given
on command line. Format: --conf-file=<config file>
2008-09-30 16:37:33 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): config file search
order: ['/var/lib/python-support/python2.5/Gnumed/gnumed.conf']
2008-09-30 16:37:33 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): config file [/var/lib/
python-support/python2.5/Gnumed/gnumed.conf] not found
2008-09-30 16:37:33 [ERROR] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): cannot find config
file in any of the standard paths
2008-09-30 16:37:33 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): (<aDir=None>, <aName=/
home/kyle/.gnumed/gnumed.conf>)
2008-09-30 16:37:33 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): No config file given
on command line. Format: --conf-file=<config file>
2008-09-30 16:37:33 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): config file search
order: [u'/home/kyle/.gnumed/gnumed.conf']
2008-09-30 16:37:33 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): found config file [/
home/kyle/.gnumed/gnumed.conf]
2008-09-30 16:37:33 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): parsing config file
[/home/kyle/.gnumed/gnumed.conf]
2008-09-30 16:37:33 [WARN] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): group [workplace] not found
2008-09-30 16:37:33 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): (<aDir=None>, <aName=/
etc/gnumed-client.conf>)
2008-09-30 16:37:33 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): No config file given
on command line. Format: --conf-file=<config file>
2008-09-30 16:37:33 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): config file search
order: [u'/etc/gnumed-client.conf']
2008-09-30 16:37:33 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): config file [/etc/
gnumed-client.conf] not found
2008-09-30 16:37:33 [ERROR] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): cannot find config
file in any of the standard paths
2008-09-30 16:37:33 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): (<aDir=None>, <aName=/
etc/gnumed-client.conf>)
2008-09-30 16:37:33 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): ignoring command line
per cfg_IGNORE_CMD_LINE
2008-09-30 16:37:33 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): config file search
order: [u'/etc/gnumed-client.conf']
2008-09-30 16:37:33 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): config file [/etc/
gnumed-client.conf] not found
2008-09-30 16:37:33 [ERROR] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): cannot find config
file in any of the standard paths
2008-09-30 16:37:33 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): (<aDir=None>, <aName=/
home/kyle/.gnumed/gnumed.conf>)
2008-09-30 16:37:33 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): ignoring command line
per cfg_IGNORE_CMD_LINE
2008-09-30 16:37:33 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): config file search
order: [u'/home/kyle/.gnumed/gnumed.conf']
2008-09-30 16:37:33 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): found config file [/
home/kyle/.gnumed/gnumed.conf]
2008-09-30 16:37:33 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): parsing config file
[/home/kyle/.gnumed/gnumed.conf]
2008-09-30 16:37:33 [WARN] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): group [backend] not found
2008-09-30 16:37:33 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): (<aDir=None>, <aName=/
home/kyle/gnumed.conf>)
2008-09-30 16:37:33 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): ignoring command line
per cfg_IGNORE_CMD_LINE
2008-09-30 16:37:33 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): config file search
order: ['/home/kyle/gnumed.conf']
2008-09-30 16:37:33 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): config file [/home/
kyle/gnumed.conf] not found
2008-09-30 16:37:33 [ERROR] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): cannot find config
file in any of the standard paths
2008-09-30 16:37:33 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): (<aDir=None>, <aName=/
home/kyle/.gnumed/gnumed.conf>)
2008-09-30 16:37:33 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): ignoring command line
per cfg_IGNORE_CMD_LINE
2008-09-30 16:37:33 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): config file search
order: [u'/home/kyle/.gnumed/gnumed.conf']
2008-09-30 16:37:33 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): found config file [/
home/kyle/.gnumed/gnumed.conf]
2008-09-30 16:37:33 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): parsing config file
[/home/kyle/.gnumed/gnumed.conf]
2008-09-30 16:37:33 [WARN] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): group [backend] not found
2008-09-30 16:37:33 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): (<aDir=None>, <aName=/
home/kyle/gnumed.conf>)
2008-09-30 16:37:33 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): ignoring command line
per cfg_IGNORE_CMD_LINE
2008-09-30 16:37:33 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): config file search
order: ['/home/kyle/gnumed.conf']
2008-09-30 16:37:33 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): config file [/home/
kyle/gnumed.conf] not found
2008-09-30 16:37:33 [ERROR] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): cannot find config
file in any of the standard paths
2008-09-30 16:37:33 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): (<aDir=None>, <aName=/
home/kyle/.gnumed/gnumed.conf>)
2008-09-30 16:37:33 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): ignoring command line
per cfg_IGNORE_CMD_LINE
2008-09-30 16:37:33 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): config file search
order: [u'/home/kyle/.gnumed/gnumed.conf']
2008-09-30 16:37:33 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): found config file [/
home/kyle/.gnumed/gnumed.conf]
2008-09-30 16:37:33 [DATA] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): parsing config file
[/home/kyle/.gnumed/gnumed.conf]
2008-09-30 16:37:33 [WARN] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): group [preferences] not found
2008-09-30 16:37:33 [WARN] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): group [preferences] not found
2008-09-30 16:37:46 [WARN] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): group [workplace] not found
2008-09-30 16:37:59 [WARN] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): group [workplace] not found
2008-09-30 16:38:10 [WARN] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): group [workplace] not found
2008-09-30 16:42:26 [INFO] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmAuthWidgets.py:address@hidden):
debug mode disabled
2008-09-30 16:42:26 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmLog.py:address@hidden): SECURITY: log level
change from [DATA] to [INFO]
2008-09-30 16:42:26 [INFO] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmAuthWidgets.py:address@hidden):
slave mode disabled
2008-09-30 16:42:28 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmPG2.py:address@hidden): PostgreSQL version
(numeric): 8.1
2008-09-30 16:42:29 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmPG2.py:address@hidden): setting default
login from [<Gnumed.pycommon.gmLoginInfo.LoginInfo instance at
0x8a246ac>] to [<Gnumed.pycommon.gmLoginInfo.LoginInfo instance at
0x8a246ac>]
2008-09-30 16:42:29 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmPG2.py:address@hidden): setting default DSN
from [dbname=gnumed_v8 host=salaam.homeunix.com port=5432 user=any-
doc password=any-doc sslmode=prefer] to [dbname=gnumed_v8
host=salaam.homeunix.com port=5432 user=any-doc password=any-doc
sslmode=prefer]
2008-09-30 16:42:29 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmPG2.py:address@hidden): setting
default client encoding from [UTF8] to [UTF8]
2008-09-30 16:42:32 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmPG2.py:address@hidden): PostgreSQL version
(string): "PostgreSQL 8.1.11 on i486-pc-linux-gnu, compiled by GCC cc
(GCC) 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)"
2008-09-30 16:42:33 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmPG2.py:address@hidden): detected
schema version [v8], hash [89b13a7af83337c3aad153b717e52360]
2008-09-30 16:42:33 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): ignoring command line
per cfg_IGNORE_CMD_LINE
2008-09-30 16:42:33 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): found config file [/
home/kyle/.gnumed/gnumed.conf]
2008-09-30 16:42:33 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmPG2.py:address@hidden):
checking database settings
2008-09-30 16:42:33 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmBackendListener.py:address@hidden): starting backend
notifications listener thread
2008-09-30 16:42:34 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmBackendListener.py:address@hidden):
configured patient specific notifications:
2008-09-30 16:42:34 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmBackendListener.py:address@hidden):
[u'allg_mod_db', u'allg_state_mod_db', u'doc_mod_db',
u'doc_page_mod_db', u'identity_mod_db', u'name_mod_db', u'vacc_mod_db']
2008-09-30 16:42:34 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmBackendListener.py:address@hidden):
configured unspecific notifications:
2008-09-30 16:42:34 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmBackendListener.py:address@hidden):
[u'provider_inbox_mod_db']
2008-09-30 16:42:34 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmBackendListener.py:address@hidden):
listener process PID: [6505]
2008-09-30 16:42:34 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/
gmBackendListener.py:address@hidden):
starting to listen for [provider_inbox_mod_db:]
2008-09-30 16:42:34 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmBackendListener.py:address@hidden): starting
listener thread
2008-09-30 16:42:36 [WARN] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiMain.py:address@hidden): database locale
[de_DE] does not match system locale [en_US]
2008-09-30 16:42:36 [WARN] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmCfg.py:address@hidden): group [backend] not found
2008-09-30 16:42:36 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmTools.py:address@hidden):
appending to sys.path: [/home/kyle/.gnumed/scripts]
2008-09-30 16:42:36 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmTools.py:address@hidden):
imported module [hook_script] as [<module 'hook_script' from '/home/
kyle/.gnumed/scripts/hook_script.pyc'>]
2008-09-30 16:43:02 [INFO] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiMain.py:address@hidden): neither OsiriX
nor AMIDE nor xmedcon found, disabling "DICOM viewer" menu item
2008-09-30 16:43:06 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmTools.py:address@hidden):
appending to sys.path: [/home/kyle/.gnumed/scripts]
2008-09-30 16:43:06 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmTools.py:address@hidden):
imported module [hook_script] as [<module 'hook_script' from '/home/
kyle/.gnumed/scripts/hook_script.pyc'>]
2008-09-30 16:43:06 [INFO] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmPlugin.py:address@hidden):
gmProviderInboxPlugin
2008-09-30 16:43:06 [INFO] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmPlugin.py:address@hidden): set: [gui] class:
[gmProviderInboxPlugin] name: [Inbox]
2008-09-30 16:43:07 [INFO] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gui/
gmNotebookedPatientEditionPlugin.py:<module>@30): $Revision: 1.8 $
2008-09-30 16:43:07 [INFO] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmPlugin.py:address@hidden):
gmNotebookedPatientEditionPlugin
2008-09-30 16:43:07 [INFO] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmPlugin.py:address@hidden): set: [gui] class:
[gmNotebookedPatientEditionPlugin] name: [Patient Details]
2008-09-30 16:43:07 [INFO] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gui/gmEMRBrowserPlugin.py:<module>@17): $Revision:
1.14 $
2008-09-30 16:43:07 [INFO] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmPlugin.py:address@hidden): gmEMRBrowserPlugin
2008-09-30 16:43:07 [INFO] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmPlugin.py:address@hidden): set: [gui] class:
[gmEMRBrowserPlugin] name: [EMR tree]
2008-09-30 16:43:07 [INFO] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gui/
gmNotebookedProgressNoteInputPlugin.py:<module>@28): $Revision: 1.12 $
2008-09-30 16:43:07 [INFO] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmPlugin.py:address@hidden):
gmNotebookedProgressNoteInputPlugin
2008-09-30 16:43:07 [INFO] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmPlugin.py:address@hidden): set: [gui] class:
[gmNotebookedProgressNoteInputPlugin] name: [Progress notes]
2008-09-30 16:43:09 [INFO] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gui/gmEMRJournalPlugin.py:<module>@15): $Revision:
1.10 $
2008-09-30 16:43:09 [INFO] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmPlugin.py:address@hidden): gmEMRJournalPlugin
2008-09-30 16:43:09 [INFO] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmPlugin.py:address@hidden): set: [gui] class:
[gmEMRJournalPlugin] name: [EMR journal]
2008-09-30 16:43:09 [INFO] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gui/gmShowMedDocs.py:<module>@24): $Revision: 1.71 $
2008-09-30 16:43:09 [INFO] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmPlugin.py:address@hidden): gmShowMedDocs
2008-09-30 16:43:09 [INFO] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmPlugin.py:address@hidden): set: [gui] class:
[gmShowMedDocs] name: [Documents]
2008-09-30 16:43:09 [INFO] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmPlugin.py:address@hidden):
gmScanIdxMedDocsPlugin
2008-09-30 16:43:09 [INFO] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmPlugin.py:address@hidden): set: [gui] class:
[gmScanIdxMedDocsPlugin] name: [Import Documents]
2008-09-30 16:43:09 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmScanBackend.py:<module>@26): $Revision: 1.49.4.1 $
2008-09-30 16:43:09 [INFO] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmPlugin.py:address@hidden): gmKOrganizerPlugin
2008-09-30 16:43:09 [INFO] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmPlugin.py:address@hidden): set: [gui] class:
[gmKOrganizerPlugin] name: [Appointments]
2008-09-30 16:43:09 [INFO] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmPlugin.py:address@hidden): gmDataMiningPlugin
2008-09-30 16:43:09 [INFO] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmPlugin.py:address@hidden): set: [gui] class:
[gmDataMiningPlugin] name: [Reports]
2008-09-30 16:43:09 [INFO] (/var/lib/python-support/python2.5/
Gnumed/business/gmXdtObjects.py:<module>@24): $Revision: 1.29 $
2008-09-30 16:43:09 [INFO] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gui/gmXdtViewer.py:<module>@28): $Revision: 1.29 $
2008-09-30 16:43:09 [INFO] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmPlugin.py:address@hidden): gmXdtViewer
2008-09-30 16:43:09 [INFO] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmPlugin.py:address@hidden): set: [gui] class:
[gmXdtViewer] name: [xDT Viewer]
2008-09-30 16:43:09 [INFO] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gui/gmManual.py:<module>@28): $Revision: 1.43.4.1 $
2008-09-30 16:43:09 [INFO] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmPlugin.py:address@hidden): gmManual
2008-09-30 16:43:09 [INFO] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmPlugin.py:address@hidden): set: [gui] class:
[gmManual] name: [Manual]
2008-09-30 16:43:09 [INFO] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gui/gmManual.py:address@hidden): found Manual path [/
usr/share/doc/gnumed/user-manual/]
2008-09-30 16:43:12 [INFO] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiMain.py:address@hidden): display: 1280:1024
2008-09-30 16:43:13 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmTools.py:address@hidden):
appending to sys.path: [/home/kyle/.gnumed/scripts]
2008-09-30 16:43:13 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmTools.py:address@hidden):
imported module [hook_script] as [<module 'hook_script' from '/home/
kyle/.gnumed/scripts/hook_script.pyc'>]
2008-09-30 16:45:44 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmTools.py:address@hidden):
appending to sys.path: [/home/kyle/.gnumed/scripts]
2008-09-30 16:45:44 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmTools.py:address@hidden):
imported module [hook_script] as [<module 'hook_script' from '/home/
kyle/.gnumed/scripts/hook_script.pyc'>]
2008-09-30 16:45:50 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmTools.py:address@hidden):
appending to sys.path: [/home/kyle/.gnumed/scripts]
2008-09-30 16:45:50 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmTools.py:address@hidden):
imported module [hook_script] as [<module 'hook_script' from '/home/
kyle/.gnumed/scripts/hook_script.pyc'>]
2008-09-30 16:46:01 [PANIC] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
unhandled exception caught
2008-09-30 16:46:01 [PANIC] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
exception type : <type 'exceptions.AttributeError'>
2008-09-30 16:46:01 [PANIC] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
exception value: 'str' object has no attribute 'get_pydt'
2008-09-30 16:46:01 [PANIC] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
Traceback (most recent call last):<#10-0x0A-lf>
2008-09-30 16:46:01 [PANIC] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/var/lib/python-support/python2.5/Gnumed/wxpython/
gmGuiMain.py", line 1561, in __on_create_patient<#10-0x0A-lf>
wiz.RunWizard(activate=True)<#10-0x0A-lf>
2008-09-30 16:46:01 [PANIC] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/var/lib/python-support/python2.5/Gnumed/wxpython/
gmDemographicsWidgets.py", line 1859, in RunWizard<#10-0x0A-lf>
ident = create_identity_from_dtd(dtd =
self.basic_pat_details.form_DTD)<#10-0x0A-lf>
2008-09-30 16:46:01 [PANIC] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/var/lib/python-support/python2.5/Gnumed/wxpython/
gmDemographicsWidgets.py", line 2288, in
create_identity_from_dtd<#10-0x0A-lf> dob = dtd['dob'].get_pydt
(),<#10-0x0A-lf>
2008-09-30 16:46:01 [PANIC] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
AttributeError: 'str' object has no attribute 'get_pydt'<#10-0x0A-lf>
2008-09-30 16:46:01 [WARN] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
syncing log file for backup to [/home/kyle/gnumed/logs/
gnumed_2008-09-30_16-46-01.log]
2008-09-30 16:46:09 [ERROR] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
user comment:
2008-09-30 16:46:12 [ERROR] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmBusinessDBObject.py:address@hidden):
[cIdentity:35]: no such instance
2008-09-30 16:46:12 [PANIC] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
unhandled exception caught
2008-09-30 16:46:12 [PANIC] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
exception type : <class 'Gnumed.pycommon.gmExceptions.ConstructorError'>
2008-09-30 16:46:12 [PANIC] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
exception value: [cIdentity:35]: error loading instance
2008-09-30 16:46:12 [PANIC] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
Traceback (most recent call last):<#10-0x0A-lf>
2008-09-30 16:46:12 [PANIC] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/var/lib/python-support/python2.5/Gnumed/wxpython/
gmProviderInboxWidgets.py", line 204, in _lst_item_activated<#10-0x0A-
lf> if not handle_item(pk_context = msg[6]):<#10-0x0A-lf>
2008-09-30 16:46:12 [PANIC] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/var/lib/python-support/python2.5/Gnumed/wxpython/
gmProviderInboxWidgets.py", line 246, in _goto_doc_review<#10-0x0A-
lf> if not gmPerson.set_active_patient(patient=gmPerson.cIdentity
(aPK_obj=pk_context)):<#10-0x0A-lf>
2008-09-30 16:46:12 [PANIC] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/var/lib/python-support/python2.5/Gnumed/pycommon/
gmBusinessDBObject.py", line 193, in __init__<#10-0x0A-lf>
self.__init_from_pk(aPK_obj=aPK_obj)<#10-0x0A-lf>
2008-09-30 16:46:12 [PANIC] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/var/lib/python-support/python2.5/Gnumed/pycommon/
gmBusinessDBObject.py", line 220, in __init_from_pk<#10-0x0A-lf>
raise gmExceptions.ConstructorError, "[%s:%s]: error loading
instance" % (self.__class__.__name__, self.pk_obj)<#10-0x0A-lf>
2008-09-30 16:46:12 [PANIC] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
ConstructorError: [cIdentity:35]: error loading instance<#10-0x0A-lf>
2008-09-30 16:46:12 [WARN] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
syncing log file for backup to [/home/kyle/gnumed/logs/
gnumed_2008-09-30_16-46-12.log]
2008-09-30 16:46:30 [ERROR] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
user comment:
2008-09-30 16:46:50 [INFO] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmPatSearchWidgets.py:address@hidden): 4 person
objects(s) fetched in 0.603 seconds
2008-09-30 16:47:23 [INFO] (/var/lib/python-support/python2.5/
Gnumed/business/gmMedDoc.py:address@hidden): no mugshots
available for patient [100]
2008-09-30 16:47:26 [INFO] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmHorstSpace.py:address@hidden):
cannot check whether notebook page change needs to be vetoed
2008-09-30 16:47:31 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmTools.py:address@hidden):
appending to sys.path: [/home/kyle/.gnumed/scripts]
2008-09-30 16:47:31 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmTools.py:address@hidden):
imported module [hook_script] as [<module 'hook_script' from '/home/
kyle/.gnumed/scripts/hook_script.pyc'>]
2008-09-30 16:48:10 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmTools.py:address@hidden):
appending to sys.path: [/home/kyle/.gnumed/scripts]
2008-09-30 16:48:10 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmTools.py:address@hidden):
imported module [hook_script] as [<module 'hook_script' from '/home/
kyle/.gnumed/scripts/hook_script.pyc'>]
2008-09-30 16:48:13 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmTools.py:address@hidden):
appending to sys.path: [/home/kyle/.gnumed/scripts]
2008-09-30 16:48:13 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmTools.py:address@hidden):
imported module [hook_script] as [<module 'hook_script' from '/home/
kyle/.gnumed/scripts/hook_script.pyc'>]
2008-09-30 17:01:40 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmTools.py:address@hidden):
appending to sys.path: [/home/kyle/.gnumed/scripts]
2008-09-30 17:01:40 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmTools.py:address@hidden):
imported module [hook_script] as [<module 'hook_script' from '/home/
kyle/.gnumed/scripts/hook_script.pyc'>]
2008-09-30 17:10:18 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmTools.py:address@hidden):
appending to sys.path: [/home/kyle/.gnumed/scripts]
2008-09-30 17:10:18 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmTools.py:address@hidden):
imported module [hook_script] as [<module 'hook_script' from '/home/
kyle/.gnumed/scripts/hook_script.pyc'>]
2008-09-30 17:10:23 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmTools.py:address@hidden):
appending to sys.path: [/home/kyle/.gnumed/scripts]
2008-09-30 17:10:23 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmTools.py:address@hidden):
imported module [hook_script] as [<module 'hook_script' from '/home/
kyle/.gnumed/scripts/hook_script.pyc'>]
2008-10-01 09:49:23 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmTools.py:address@hidden):
appending to sys.path: [/home/kyle/.gnumed/scripts]
2008-10-01 09:49:23 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmTools.py:address@hidden):
imported module [hook_script] as [<module 'hook_script' from '/home/
kyle/.gnumed/scripts/hook_script.pyc'>]
2008-10-01 09:49:28 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmBackendListener.py:address@hidden): stopping
backend notifications listener thread
2008-10-01 09:49:33 [ERROR] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmBackendListener.py:address@hidden): listener
thread still alive after join()
2008-10-01 09:49:33 [PANIC] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
unhandled exception caught
2008-10-01 09:49:33 [PANIC] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
exception type : <class 'psycopg2.OperationalError'>
2008-10-01 09:49:33 [PANIC] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
exception value: connection not open
2008-10-01 09:49:33 [PANIC] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
Traceback (most recent call last):<#10-0x0A-lf>
2008-10-01 09:49:33 [PANIC] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/var/lib/python-support/python2.5/Gnumed/wxpython/
gmGuiMain.py", line 1321, in OnClose<#10-0x0A-lf> self._clean_exit
()<#10-0x0A-lf>
2008-10-01 09:49:33 [PANIC] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/var/lib/python-support/python2.5/Gnumed/wxpython/
gmGuiMain.py", line 1606, in _clean_exit<#10-0x0A-lf>
listener.stop_thread()<#10-0x0A-lf>
2008-10-01 09:49:33 [PANIC] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/var/lib/python-support/python2.5/Gnumed/pycommon/
gmBackendListener.py", line 97, in stop_thread<#10-0x0A-lf>
self.__unregister_patient_notifications()<#10-0x0A-lf>
2008-10-01 09:49:33 [PANIC] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/var/lib/python-support/python2.5/Gnumed/pycommon/
gmBackendListener.py", line 179, in
__unregister_patient_notifications<#10-0x0A-lf>
self._cursor.execute(cmd)<#10-0x0A-lf>
2008-10-01 09:49:33 [PANIC] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/usr/lib/python2.5/site-packages/psycopg2/extras.py", line 85,
in execute<#10-0x0A-lf> return _cursor.execute(self, query, vars,
async)<#10-0x0A-lf>
2008-10-01 09:49:33 [PANIC] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
OperationalError: connection not open<#10-0x0A-lf><#10-0x0A-lf>
2008-10-01 09:49:34 [WARN] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
syncing log file for backup to [/home/kyle/gnumed/logs/
gnumed_2008-10-01_09-49-34.log]
2008-10-01 09:49:35 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmTools.py:address@hidden):
appending to sys.path: [/home/kyle/.gnumed/scripts]
2008-10-01 09:49:35 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmTools.py:address@hidden):
imported module [hook_script] as [<module 'hook_script' from '/home/
kyle/.gnumed/scripts/hook_script.pyc'>]
2008-10-01 09:49:36 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmTools.py:address@hidden):
appending to sys.path: [/home/kyle/.gnumed/scripts]
2008-10-01 09:49:36 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmTools.py:address@hidden):
imported module [hook_script] as [<module 'hook_script' from '/home/
kyle/.gnumed/scripts/hook_script.pyc'>]
2008-10-01 09:49:39 [ERROR] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
user comment:
2008-10-01 09:49:39 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmBackendListener.py:address@hidden): stopping
backend notifications listener thread
2008-10-01 09:49:39 [PANIC] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
unhandled exception caught
2008-10-01 09:49:39 [PANIC] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
exception type : <class 'thread.error'>
2008-10-01 09:49:39 [PANIC] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
exception value: release unlocked lock
2008-10-01 09:49:39 [PANIC] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
Traceback (most recent call last):<#10-0x0A-lf>
2008-10-01 09:49:39 [PANIC] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/var/lib/python-support/python2.5/Gnumed/wxpython/
gmGuiMain.py", line 1321, in OnClose<#10-0x0A-lf> self._clean_exit
()<#10-0x0A-lf>
2008-10-01 09:49:39 [PANIC] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/var/lib/python-support/python2.5/Gnumed/wxpython/
gmGuiMain.py", line 1606, in _clean_exit<#10-0x0A-lf>
listener.stop_thread()<#10-0x0A-lf>
2008-10-01 09:49:39 [PANIC] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/var/lib/python-support/python2.5/Gnumed/pycommon/
gmBackendListener.py", line 87, in stop_thread<#10-0x0A-lf>
self._quit_lock.release()<#10-0x0A-lf>
2008-10-01 09:49:39 [PANIC] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
error: release unlocked lock<#10-0x0A-lf>
2008-10-01 09:49:39 [WARN] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
syncing log file for backup to [/home/kyle/gnumed/logs/
gnumed_2008-10-01_09-49-39.log]
2008-10-01 09:49:41 [ERROR] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
user comment:
2008-10-01 09:49:41 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmBackendListener.py:address@hidden): stopping
backend notifications listener thread
2008-10-01 09:49:41 [PANIC] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
unhandled exception caught
2008-10-01 09:49:41 [PANIC] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
exception type : <class 'thread.error'>
2008-10-01 09:49:41 [PANIC] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
exception value: release unlocked lock
2008-10-01 09:49:41 [PANIC] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
Traceback (most recent call last):<#10-0x0A-lf>
2008-10-01 09:49:41 [PANIC] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/var/lib/python-support/python2.5/Gnumed/wxpython/
gmGuiMain.py", line 1321, in OnClose<#10-0x0A-lf> self._clean_exit
()<#10-0x0A-lf>
2008-10-01 09:49:41 [PANIC] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/var/lib/python-support/python2.5/Gnumed/wxpython/
gmGuiMain.py", line 1606, in _clean_exit<#10-0x0A-lf>
listener.stop_thread()<#10-0x0A-lf>
2008-10-01 09:49:41 [PANIC] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/var/lib/python-support/python2.5/Gnumed/pycommon/
gmBackendListener.py", line 87, in stop_thread<#10-0x0A-lf>
self._quit_lock.release()<#10-0x0A-lf>
2008-10-01 09:49:41 [PANIC] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
error: release unlocked lock<#10-0x0A-lf>
2008-10-01 09:49:41 [WARN] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
syncing log file for backup to [/home/kyle/gnumed/logs/
gnumed_2008-10-01_09-49-41.log]
2008-10-01 09:49:48 [ERROR] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
user comment:
2008-10-01 09:49:48 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmBackendListener.py:address@hidden): stopping
backend notifications listener thread
2008-10-01 09:49:48 [PANIC] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
unhandled exception caught
2008-10-01 09:49:48 [PANIC] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
exception type : <class 'thread.error'>
2008-10-01 09:49:48 [PANIC] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
exception value: release unlocked lock
2008-10-01 09:49:48 [PANIC] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
Traceback (most recent call last):<#10-0x0A-lf>
2008-10-01 09:49:48 [PANIC] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/var/lib/python-support/python2.5/Gnumed/wxpython/
gmGuiMain.py", line 1321, in OnClose<#10-0x0A-lf> self._clean_exit
()<#10-0x0A-lf>
2008-10-01 09:49:48 [PANIC] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/var/lib/python-support/python2.5/Gnumed/wxpython/
gmGuiMain.py", line 1606, in _clean_exit<#10-0x0A-lf>
listener.stop_thread()<#10-0x0A-lf>
2008-10-01 09:49:48 [PANIC] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/var/lib/python-support/python2.5/Gnumed/pycommon/
gmBackendListener.py", line 87, in stop_thread<#10-0x0A-lf>
self._quit_lock.release()<#10-0x0A-lf>
2008-10-01 09:49:48 [PANIC] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
error: release unlocked lock<#10-0x0A-lf>
2008-10-01 09:49:48 [WARN] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
syncing log file for backup to [/home/kyle/gnumed/logs/
gnumed_2008-10-01_09-49-48.log]
2008-10-01 09:49:51 [ERROR] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
user comment:
2008-10-01 09:49:53 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmBackendListener.py:address@hidden): stopping
backend notifications listener thread
2008-10-01 09:49:53 [PANIC] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
unhandled exception caught
2008-10-01 09:49:53 [PANIC] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
exception type : <class 'thread.error'>
2008-10-01 09:49:53 [PANIC] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
exception value: release unlocked lock
2008-10-01 09:49:53 [PANIC] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
Traceback (most recent call last):<#10-0x0A-lf>
2008-10-01 09:49:53 [PANIC] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/var/lib/python-support/python2.5/Gnumed/wxpython/
gmGuiMain.py", line 1321, in OnClose<#10-0x0A-lf> self._clean_exit
()<#10-0x0A-lf>
2008-10-01 09:49:53 [PANIC] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/var/lib/python-support/python2.5/Gnumed/wxpython/
gmGuiMain.py", line 1606, in _clean_exit<#10-0x0A-lf>
listener.stop_thread()<#10-0x0A-lf>
2008-10-01 09:49:53 [PANIC] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/var/lib/python-support/python2.5/Gnumed/pycommon/
gmBackendListener.py", line 87, in stop_thread<#10-0x0A-lf>
self._quit_lock.release()<#10-0x0A-lf>
2008-10-01 09:49:53 [PANIC] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
error: release unlocked lock<#10-0x0A-lf>
2008-10-01 09:49:53 [WARN] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
syncing log file for backup to [/home/kyle/gnumed/logs/
gnumed_2008-10-01_09-49-53.log]
2008-10-01 09:49:54 [ERROR] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
user comment:
2008-10-01 09:49:55 [INFO] (/var/lib/python-support/python2.5/
Gnumed/pycommon/gmBackendListener.py:address@hidden): stopping
backend notifications listener thread
2008-10-01 09:49:55 [PANIC] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
unhandled exception caught
2008-10-01 09:49:55 [PANIC] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
exception type : <class 'thread.error'>
2008-10-01 09:49:55 [PANIC] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
exception value: release unlocked lock
2008-10-01 09:49:55 [PANIC] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
Traceback (most recent call last):<#10-0x0A-lf>
2008-10-01 09:49:55 [PANIC] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/var/lib/python-support/python2.5/Gnumed/wxpython/
gmGuiMain.py", line 1321, in OnClose<#10-0x0A-lf> self._clean_exit
()<#10-0x0A-lf>
2008-10-01 09:49:55 [PANIC] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/var/lib/python-support/python2.5/Gnumed/wxpython/
gmGuiMain.py", line 1606, in _clean_exit<#10-0x0A-lf>
listener.stop_thread()<#10-0x0A-lf>
2008-10-01 09:49:55 [PANIC] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
File "/var/lib/python-support/python2.5/Gnumed/pycommon/
gmBackendListener.py", line 87, in stop_thread<#10-0x0A-lf>
self._quit_lock.release()<#10-0x0A-lf>
2008-10-01 09:49:55 [PANIC] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
error: release unlocked lock<#10-0x0A-lf>
2008-10-01 09:49:55 [WARN] (/var/lib/python-support/python2.5/
Gnumed/wxpython/gmGuiHelpers.py:address@hidden):
syncing log file for backup to [/home/kyle/gnumed/logs/
gnumed_2008-10-01_09-49-55.log]
_______________________________________________
Gnumed-devel mailing list
address@hidden
http://lists.gnu.org/mailman/listinfo/gnumed-devel
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [Gnumed-bugs] Fwd: [Gnumed-devel] <bug>: Just trying to close.,
James Busser <=