[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Freeipmi-devel] Re: [llnl-devel] Re: power control and BMC configuratio
From: |
Albert Chu |
Subject: |
[Freeipmi-devel] Re: [llnl-devel] Re: power control and BMC configuration problem |
Date: |
Thu, 22 Jan 2004 13:56:00 -0800 |
Hey AB,
We tried the cross-over cable, and power control worked perfectly. So
its most likely some type of switch issue. Have you been able to
reproduce the problem??
Al
--
Albert Chu
address@hidden
Lawrence Livermore National Laboratory
----- Original Message -----
From: Anand Babu <address@hidden>
Date: Tuesday, January 20, 2004 1:47 pm
Subject: Re: [llnl-devel] Re: power control and BMC configuration problem
> I have seen exactly same kind of problem at GE, because of switch
> configuration (spanning tree related). To eliminate network related
> issues, Use a cross over cable to test the BMC communication.
> -ab
>
> >Oh, I should note that this problem is completely different than
> than
> >ARP issue that happened a few weeks ago. Gratuitous ARPs are
> enabled,>so this is a different configuration issue.
>
> >Al
>
> --
> Anand Babu
> Free as in Freedom <www.gnu.org>
>
- [Freeipmi-devel] Re: [llnl-devel] Re: power control and BMC configuration problem,
Albert Chu <=