[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Freeipmi-devel] Re: [llnl-devel] power control and BMC configuration pr
From: |
Albert Chu |
Subject: |
[Freeipmi-devel] Re: [llnl-devel] power control and BMC configuration problem |
Date: |
Tue, 20 Jan 2004 12:05:25 -0800 |
Hmmm, perhaps this is related to the Suspend BMC ARPs Command (19.3)???
"This command can be used to suspend BMC-generated ARPS while run-time
software is handling them."
Al
--
Albert Chu
address@hidden
Lawrence Livermore National Laboratory
----- Original Message -----
From: Albert Chu <address@hidden>
Date: Tuesday, January 20, 2004 11:30 am
Subject: Re: [llnl-devel] power control and BMC configuration problem
> > Am I understanding this correctly? It doesn't happen if you just
> pull
> > the plug, only if you do a software halt?
>
> Haven't tried pulling the plug, but so far we only see this on a
> software halt.
>
> > Also, have you ever run our BMC configurator on the "test cluster"?
>
> I've run it, but our test cluster was initially configured with the
> SMUprogram. So whatever SMU defaults were put in the BMC firmware are
> still there.
>
> Al
>
> --
> Albert Chu
> address@hidden
> Lawrence Livermore National Laboratory
>
> ----- Original Message -----
> From: Ian Zimmerman <address@hidden>
> Date: Tuesday, January 20, 2004 11:18 am
> Subject: Re: [llnl-devel] power control and BMC configuration problem
>
> > Albert Chu <address@hidden> writes:
> >
> > > We are currently having a power control problem on thunder.
> > After we
> > > halt a machine (/sbin/halt), the BMC is no longer reachable.
> We
> > haven't> this problem on our test cluster of tiger4s, only on
> thunder.>
> > Am I understanding this correctly?
> > It doesn't happen if you just pull the plug, only if you do a
> > software halt?
> >
> > Also, have you ever run our BMC configurator on the "test cluster"?
> >
> > Ian
> >
>
>
> _______________________________________________
> llnl-devel mailing list
> address@hidden
> http://californiadigital.com/cgi-bin/mailman/listinfo/llnl-devel
>