[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [ESPResSo] p3m method
From: |
Axel Arnold |
Subject: |
Re: [ESPResSo] p3m method |
Date: |
Wed, 18 Feb 2009 13:16:18 +0100 |
User-agent: |
KMail/1.7.1 |
Am Mittwoch 18 Februar 2009 12:25 schrieb Owen Hickey:
> It sounds like you may have compiled Espresso with electrostatics disabled.
> Try recompiling with the line
> /* #define ELECTROSTATICS */
> replaced with
> #define ELECTROSTATICS
> in the file myconfig.h. Espresso only compiles certain routines depending
> on which lines are commented (/* text between these symbols is commented
> */) and those which are not in the file myconfig.h. The P3M method
> requires that you compile with the electrostatics package. I hope this
> helps!
Hi,
I just want to add that P3M also does not get compiled in if you do not have
the development-version of FFTW installed. To check wether FFT is compiled
in, start Espresso and run code_info. The output should contain either FFTW2
or FFTW3, otherwise, Espresso did not find the FFTW-headers and/or library.
In this case take a look at obj-<xxx>/config.log to figure out what is
missing.
Axel
--
Dr. Axel Arnold
Fraunhofer SCAI
Schloss Birlinghoven, 53754 Sankt Augustin, Germany
Tel: +49 2241 14 2575