[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Dvdrtools-users] Cannot recognise blank DVD: No disk / Wrong disk!
From: |
Gough J.J. |
Subject: |
[Dvdrtools-users] Cannot recognise blank DVD: No disk / Wrong disk! |
Date: |
Mon, 19 May 2003 11:54:43 +0100 (BST) |
Hello,
I have an external DVD RW drive. When I originally installed it I
succeeded in writing a DVD, but I have changed something and I can no
longer detect blank DVDs. Basically I have been messing around with RPMs
and libraries (updated the kernel to 2.4.20-13.7) to get it working with
xine,gmplayer,ogle,omi, etc.. I can however succesfully detect blank CDs. I am
using cdrecordProDVD 2.01a12-i586-pc-linux-gnu which is the latest (but I
have tried all the older versions as well). I get the same result with
readcd, readcd.clone, dvdrecord, cdrecord (original), and cdrecord.prodvd.
I have tried using all the different DVD drivers with cdrecord.prodvd as
well and always get the same result.
No disk / Wrong disk!
I would be extremely grateful for any help I can get on this. I saw a
similar posting on this list and the problem was solved by using the
mmc_dvd driver but in my case this doesn't help. I know there must be some
way of getting this drive to work because I already burnt one DVD with it.
I don't remember what options I was using the first time, probably just
the default xcdroast options.
Here is an example of what happens with a blank DVD and a blank CD:
address@hidden gough]# /usr/lib/xcdroast-0.98/bin/cdrecord.prodvd
driver=mmc_dvd debug=9 dev=0,0,0 -load 2>&1
dev: '0,0,0' speed: -1 fs: 4194304 driveropts '(NULL POINTER)'
Cdrecord-ProDVD-Clone 2.01a12 (i586-pc-linux-gnu) Copyright (C) 1995-2003
Jrg Schilling
Unlocked features:
Limited features:
TOC Type: 1 = CD-ROM
fs: 4194304 buflen: 4198400
/usr/lib/xcdroast-0.98/bin/cdrecord.prodvd: shared memory segment attached
at: 40020000 size 4198400
buf: 40020000 bufend: 40421000, buflen: 4198400
buf: 40020000 bufend: 40421000, buflen: 4198400 (align 0)
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
scg__open() 0,0,0
Linux sg driver version: 3.1.24
l1: 0x0 l2: 0x0
Bus: 0 Target: 0 Lun: 0 Chan: 0 Ino: 0
Using libscg version 'schily-0.7'
Device type : Removable CD-ROM
Version : 2
Response Format: 2
Capabilities :
Vendor_info : '_NEC '
Identifikation : 'DVD+RW ND-1100A '
Revision : '1.75'
Device seems to be: Generic mmc2 DVD-ROM.
/usr/lib/xcdroast-0.98/bin/cdrecord.prodvd: WARNING: Trying to use other
driver on known device.
Using generic SCSI-3/mmc-2 DVD-R/DVD-RW driver (mmc_dvd).
Driver flags : DVD MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R
/usr/lib/xcdroast-0.98/bin/cdrecord.prodvd: Input/output error. test unit
ready: scsi sendcmd: no error
CDB: 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 3A 00 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x3A Qual 0x00 (medium not present) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.001s timeout 100s
/usr/lib/xcdroast-0.98/bin/cdrecord.prodvd: No disk / Wrong disk!
... and with a blank CD
address@hidden gough]# /usr/lib/xcdroast-0.98/bin/cdrecord.prodvd
driver=mmc_dvd debug=9 dev=0,0,0 -load 2>&1
dev: '0,0,0' speed: -1 fs: 4194304 driveropts '(NULL POINTER)'
Cdrecord-ProDVD-Clone 2.01a12 (i586-pc-linux-gnu) Copyright (C) 1995-2003
Jrg Schilling
Unlocked features:
Limited features:
TOC Type: 1 = CD-ROM
fs: 4194304 buflen: 4198400
/usr/lib/xcdroast-0.98/bin/cdrecord.prodvd: shared memory segment attached
at: 40020000 size 4198400
buf: 40020000 bufend: 40421000, buflen: 4198400
buf: 40020000 bufend: 40421000, buflen: 4198400 (align 0)
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
scg__open() 0,0,0
Linux sg driver version: 3.1.24
l1: 0x0 l2: 0x0
Bus: 0 Target: 0 Lun: 0 Chan: 0 Ino: 0
Using libscg version 'schily-0.7'
Device type : Removable CD-ROM
Version : 2
Response Format: 2
Capabilities :
Vendor_info : '_NEC '
Identifikation : 'DVD+RW ND-1100A '
Revision : '1.75'
Device seems to be: Generic mmc2 DVD-ROM.
/usr/lib/xcdroast-0.98/bin/cdrecord.prodvd: WARNING: Trying to use other
driver on known device.
Using generic SCSI-3/mmc-2 DVD-R/DVD-RW driver (mmc_dvd).
Driver flags : DVD MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R
- [Dvdrtools-users] Cannot recognise blank DVD: No disk / Wrong disk!,
Gough J.J. <=