[Dvdrtools-users] Problems with DVD recording

[Seemueller, Andreas]

Hello Everyone,

To have more than one SuSE-DVD I tried to copy it with our Pioneer DVR-A03 (I 
think this drive is also known as DVD-103). This is an internal IDE-Drive so 
I'm using the scsi-ide-emulation for this drive. According to 
http://mail.freesoftware.fsf.org/pipermail/dvdrtools-users/2002-February/000008.html
 
I've created an iso image using 

mkisofs -R -J -udf -U -o /tmp/dvd.iso SuSE_8.0. 

The -U option is used because of some package-names with two dots.

dvdrecord -v speed=1 dev=0,0,0 /tmp/dvd.iso

I get the following output:

dvdrtools - based on:
Cdrecord 1.11a13 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
TOC Type: 1 = CD-ROM
dvdrecord: Fifo not supported.
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.22
Using libscg version 'schily-0.5'
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   :
Vendor_info    : 'PIONEER '
Identifikation : 'DVD-RW  DVR-103 '
Revision       : '1.55'
Device seems to be: Generic mmc2 DVD.
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags   : SWABAUDIO
Supported modes: TAO PACKET SAO
Drive buf size : 1245184 = 1216 KB
FIFO size      : 4194304 = 4096 KB
Track 01: data  4489 MB
Total size:     5155 MB (510:46.21) = 2298466 sectors
Lout start:     5155 MB (510:48/16) = 2298466 sectors
Current Secsize: 2048
Trying to clear drive status.
dvdrecord: Drive needs to reload the media to return to proper status.
  ATIP start of lead in:  -150 (00:00/00)
Disk type:    unknown
Manuf. index: -1
Manufacturer: unknown (not in table)
Starting to write CD/DVD at speed 15 in write mode for single session.
Last chance to quit, starting real write in 0 seconds. Operation starts.
trackno=0
dvdrecord: Input/output error. reserve track: scsi sendcmd: no error
CDB:  53 00 00 00 00 00 23 12 60 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0E 00 00 00 00 30 05 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.005s timeout 40s
dvdrecord: Cannot open new session.


Is there a problem with the SCSI-emulation or do I have to use another DVD-R?

Thanks in advance

-- 
With kind regards

Andreas Seemueller
EADS Deutschland GmbH
Business Unit Military Aircraft
MT641 - simulation facilities
Tel. +49 (89) 6 07 - 2 28 09
Fax  +49 (89) 6 07 - 2 24 91
address@hidden