Pluto SDR GNU Radio 3.8 fail to install

Hello everyone,

I have been trying to install the gr-iio module to interface with the PlutoSDR device from analog devices for GNU Radio 3.8 using a Docker. I have been following the instructions in the following link https://wiki.analog.com/resources/tools-software/linux-software/gnuradio but i dont seem to get it right. I dont know if i am doing some step wrong that i am unaware of or what it is. Any insight on it would be much appreciated.

The Dockerfile i am using is the following:

FROM ubuntu:20.04

# You use this mode when you need zero interaction while installing or upgrading the system via apt.
ENV DEBIAN_FRONTEND=noninteractive 
ENV LC_ALL=C.UTF-8
ENV LANG=C.UTF-8

RUN apt-get update && apt-get install -y \
      xterm \
      cmake \
      software-properties-common \
      git

RUN apt-get update && apt-get install -y \
      libusb-1.0-0-dev \
      liborc-dev \
      libzmq5 \
      libzmq3-dev 
\
      swig \
      python3 \
      python3-pip \
      vim \
      nano\
      gcc-10 g++-10

# install Visual Code for embedded python blocks edditing
RUN apt update && apt install software-properties-common apt-transport-https wget -y
RUN wget -q https://packages.microsoft.com/keys/microsoft.asc -O- | apt-key add -
RUN add-apt-repository "deb [arch=amd64] https://packages.microsoft.com/repos/vscode stable main"
RUN apt install -y code

RUN update-alternatives --install /usr/bin/gcc gcc /usr/bin/gcc-10 100 \
      --slave /usr/bin/g++ g++ /usr/bin/g++-10 --slave /usr/bin/gcov gcov /usr/bin/gcov-10

# else it will output an error about Gtk namespace not found
RUN apt-get update && apt-get install -y gir1.2-gtk-3.0

# to have add-apt-repository available
RUN apt-get update && apt-get install -y software-properties-common
RUN apt-get update && add-apt-repository -y ppa:gnuradio/gnuradio-releases-3.8


RUN apt-get update

RUN apt-get install -y gnuradio

# installing other packages needed for downloading and installing OOT modules
RUN apt-get install -y gnuradio-dev cmake git libboost-all-dev libcppunit-dev liblog4cpp5-dev swig liborc-dev libgsl-dev

# install gr-satellites
RUN pip install --user --upgrade construct requests

RUN pip install websocket-client

RUN git clone https://github.com/daniestevez/gr-satellites.git
WORKDIR /gr-satellites/
RUN git checkout maint-3.8
RUN mkdir build
WORKDIR /gr-satellites/build/
RUN cmake -DCMAKE_INSTALL_PREFIX=/usr/local .. && make && make install && ldconfig
WORKDIR /gr-satellites/grc/
RUN mkdir build
WORKDIR /gr-satellites/grc/build/
RUN cmake -DCMAKE_INSTALL_PREFIX=/usr/local .. && make && make install && ldconfig
WORKDIR /

RUN ldconfig

# install gr-gpredict-doppler
RUN git clone https://github.com/ghostop14/gr-gpredict-doppler.git
RUN cd gr-gpredict-doppler && \
      git checkout maint-3.8 && \
      mkdir build && \
      cd build && \
      cmake ../ && \
      make install

RUN ldconfig

WORKDIR /home/gnuradio
RUN git clone https://github.com/esa/gr-opssat.git

# dependencies for gr-opssat python app
RUN pip3 install PyQt5 pyzmq crccheck numpy

RUN ldconfig

WORKDIR /

# ------ gr-iio

RUN apt-get update
RUN apt-get install -y libxml2 libxml2-dev bison flex cmake git libaio-dev libboost-all-dev
RUN apt-get install -y doxygen
RUN apt-get install -y libusb-1.0-0-dev
RUN apt-get install -y libavahi-common-dev libavahi-client-dev
RUN apt-get -y install libzstd-dev
RUN apt-get install -y bison flex cmake git libgmp-dev
RUN apt-get install -y swig
RUN apt-get install -y liborc-dev
RUN apt-get install -y libiio-utils

RUN git clone https://github.com/analogdevicesinc/libiio.git
WORKDIR libiio
RUN mkdir build 
WORKDIR build 
RUN cmake .. -DPYTHON_BINDINGS=ON
RUN make && make install && ldconfig
WORKDIR /

RUN git clone https://github.com/analogdevicesinc/libad9361-iio.git
WORKDIR libad9361-iio
RUN mkdir build
WORKDIR build
RUN cmake .. -DPYTHON_BINDINGS=ON
RUN make && make install && ldconfig
WORKDIR /

RUN git clone
https://github.com/analogdevicesinc/gr-iio.git
WORKDIR gr-iio
RUN mkdir build
WORKDIR build
RUN cmake ..
RUN make && make install
WORKDIR /
RUN ldconfig
# -------------------

ENV PYTHONPATH /usr/local/lib/python3/dist-packages/

# Create non-root user
RUN groupadd -r -g 1000 gnuradio && \
    useradd -r -m -s /sbin/nologin -u 1000 -g gnuradio gnuradio
# Must be done as root ?????
RUN gpasswd -a gnuradio audio

USER gnuradio

WORKDIR /home/gnuradio

CMD bash

Then the error that i am getting is the following:

=> ERROR [57/73] RUN cmake .. -DPYTHON_BINDINGS=ON 1.1s

------

> [57/73] RUN cmake .. -DPYTHON_BINDINGS=ON:

0.598 -- The C compiler identification is GNU 10.5.0

0.608 -- Check for working C compiler: /usr/bin/cc

0.667 -- Check for working C compiler: /usr/bin/cc -- works

0.669 -- Detecting C compiler ABI info

0.731 -- Detecting C compiler ABI info - done

0.743 -- Detecting C compile features

0.743 -- Detecting C compile features - done

0.757 -- Found Git: /usr/bin/git (found version "2.25.1")

0.910 -- Found Doxygen: /usr/bin/doxygen (found version "1.8.17") found components: doxygen missing components: dot

1.096 -- Found Python3: /usr/bin/python3.8 (found suitable version "3.8.10", minimum required is "3.6") found components: Interpreter

1.096 -- Found Python: Building bindings

1.098 CMake Error at bindings/python/CMakeLists.txt:41 (message):

1.098 Can not build python doc without sphinx-build

1.098

1.099 -- Configuring incomplete, errors occurred!

1.099 See also "/libad9361-iio/build/CMakeFiles/CMakeOutput.log".

1.099 CMake Error: The following variables are used in this project, but they are set to NOTFOUND.

1.099 Please set them or make sure they are set and tested correctly in the CMake files:

1.099 LIBIIO_INCLUDEDIR

1.099 used as include directory in directory /libad9361-iio

1.099 used as include directory in directory /libad9361-iio/test

1.099 used as include directory in directory /libad9361-iio/bindings

1.099 used as include directory in directory /libad9361-iio/bindings/python

1.099

------

Dockerfile:119

--------------------

117 | RUN mkdir build

118 | WORKDIR build

119 | >>> RUN cmake .. -DPYTHON_BINDINGS=ON

120 | RUN make && make install && ldconfig

121 | WORKDIR /

--------------------

ERROR: failed to solve: process "/bin/sh -c cmake .. -DPYTHON_BINDINGS=ON" did not complete successfully: exit code: 1

From:	Guillermo Lena
Subject:	Pluto SDR GNU Radio 3.8 fail to install
Date:	Thu, 21 Sep 2023 11:12:36 +0000