|
From: | Christophe Seguinot |
Subject: | Re: CCSDS 27 encoder/decoder |
Date: | Mon, 19 Apr 2021 22:15:59 +0200 |
User-agent: | Mozilla/5.0 (X11; Linux x86_64; rv:78.0) Gecko/20100101 Thunderbird/78.7.1 |
Hi
comparing inp and out bits in x-PSK at least need differential
encoding/decoding,
See for example https://wiki.gnuradio.org/index.php/Guided_Tutorial_PSK_Demodulation
Regards,
Hello Gnuradio Community,
I am working with the Gnuradio CCSDS 27 encoder/decoder blocks in Gnuradio ver 3.8. To ensure I understand these blocks, I fed a random signal from 0-255 into the encoder with an embedded Python block between the encoder and decoder which converts the bit values 0 and 1 leaving the encoder into -1 and +1 for the decoder. I use file sinks to collect the byte values (between 0-255) entering the encoder and collect those leaving the decoder and compare them to validate proper working functioning. Works good!!!
Next, appropriate blocks comprising QPSK modulator/demodulator were inserted between the CCSDS 27 encoder/decoder. At this point I could not get the output of the decoder to equal to the input of the encoder. I have tried everything, the latest being the decomposition of data (input and output) down to the bit level and put in a delay to see if I can find synchronization between the input and output bit values. I have attached my grc flowgraph.
I will appreciate any help.
Regards,George
[Prev in Thread] | Current Thread | [Next in Thread] |