[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Gnuradio 3.8 on a Raspberry pi 4 B?
From: |
Harald Fritzsche (DD0VS) |
Subject: |
Re: Gnuradio 3.8 on a Raspberry pi 4 B? |
Date: |
Mon, 25 May 2020 21:06:44 +0200 |
Hello Barry, all,
i confirm that 1. step from page:
https://wiki.gnuradio.org/index.php/InstallingGRFromSource_on_Raspberry_Pi
building libuhd is working on a rPI4 (with 2GB).
There is one change needed:
The instruction:
cmake -DNEON_SIMD_ENABLE=OFF -DCMAKE_INSTALL_PREFIX=/usr/local ../
must be extended like this:
cmake -DNEON_SIMD_ENABLE=OFF -DCMAKE_CXX_FLAGS=-latomic
-DCMAKE_INSTALL_PREFIX=/usr/local ../
(not sure whether this is the right list, maybe one can inform the
usrp-list too)
Thank you!
Next is testing if hardware is detected.
Than i will go to building GR38 what failed for me some month ago.
vy73
Harald
DD0VS
Am Mon, 25 May 2020 11:27:36 -0500
schrieb Barry Duggan <address@hidden>:
> Hi Glen,
>
> I have done several installs of GR 3.8 on my rPi 3B+. Here is the
> procedure:
> https://wiki.gnuradio.org/index.php/InstallingGRFromSource_on_Raspberry_Pi
>
> I don't have a rPi 4 yet, but am interested to know if that procedure
> fails on it. I am using 2020-02-13-raspbian-buster-full. Do not skip
> any steps! It takes about 4 hours.
>
> Regards,