|
From: | Vincenzo Mone |
Subject: | R: R: R: R: Mpir Installation |
Date: | Mon, 27 Apr 2020 22:17:31 +0200 |
Marcus, seems i have done. I have opened GEDIT and pasted 1 line at time. Now I see it like this: 1 SUBSYSTEMS=="usb" ATTRS{idVendor}=="04d8" ATTRS{idProduct}=="fb56" MODE:="0666" SUBSYSTEMS=="usb" 2 ATTRS{idVendor}=="04d8" ATTRS{idProduct}=="fb31" MODE:="0666" 3 KERNEL=="hidraw*", ATTRS{busnum}=="1", ATTRS{idVendor}=="04d8", ATTRS{idProduct}=="fb56", MODE="0666" 4 KERNEL=="hidraw*", ATTRS{busnum}=="1", ATTRS{idVendor}=="04d8", ATTRS{idProduct}=="fb31", MODE="0666" I mean it has added the progressive number on each line. Hope it is normal Then I have saved the file in: etc/udev/rules.d/ And I gave as the name of the file: fcdproplus.rules. Is it correct the procedure? Then I have rebooted the machine. I have loaded the gnuradio and opened the GRC file but I always see the fcdproplus missing block. Please any help?????? Thanks 73 de Enzo IK8OZV EasyLog 5 BetaTester EasyLog PDA BetaTester WinBollet BetaTester D.C.I. CheckPoint Regione Campania Skype: ik8ozv8520 ********************************* ****** GSM +39 328 7110193 ****** ***** SMS +39 328 7110193 ***** ********************************* > -----Messaggio originale----- > Da: Marcus Müller <address@hidden> > Inviato: lunedì 27 aprile 2020 19:16 > A: Vincenzo Mone <address@hidden> > Cc: Gnuradio Mailing List <address@hidden> > Oggetto: Re: R: R: R: Mpir Installation > > No command. You need to make a text file, just as I wrote... I give up. > > Best regards, > Marcus > > On 27/04/2020 19.12, Vincenzo Mone wrote: > > OK Marcus, > > I am adding when I reply the Maling list in the CC field. Hope it is correct. > > Please which is the correct command to make the UDEV Rules? > > Thanks > > > > > > 73 de Enzo IK8OZV > > EasyLog 5 BetaTester > > EasyLog PDA BetaTester > > WinBollet BetaTester > > D.C.I. CheckPoint Regione Campania > > Skype: ik8ozv8520 > > > > > > > > > > ********************************* > > ****** GSM +39 328 7110193 ****** > > ***** SMS +39 328 7110193 ***** > > ********************************* > > > >> -----Messaggio originale----- > >> Da: Marcus Müller <address@hidden> > >> Inviato: lunedì 27 aprile 2020 19:03 > >> A: Vincenzo Mone <address@hidden> > >> Cc: Gnuradio Mailing List <address@hidden> > >> Oggetto: Re: R: R: Mpir Installation > >> > >> Vincenzo, > >> > >> On 27/04/2020 18.54, Vincenzo Mone wrote: > >>> Marcus, > >>> apologise I have asked you also in a previous message: Please how to do > to > >> reply via the mailing list? > >>> I am using just the reply button and I understood it is wrong. > >>> Please point me to the right way. > >> > >> I literally did in my last email. > >> > >>> Coming back to the gnuradio OK I am using the 3.8 but if you see on the > >> mailing list, I have > >>> Put several messages as I still cannot getting work the FCDPRPLUS. > >>> I can read from the FCDPROPLUS Readme this and maybe it does not > work: > >> > >>> > >>> Don't forget the udev rules: For instance: > >> > >> You'll find these udev rules have nothing to do with GNU Radio 3.7 or 3.8. > >> > >>> Please can you tell me what to do? > >> > >> A udev rule is a text file that tells your operating system what to do > >> when a new device appears, e.g. when a new USB device gets connected. > >> > >> You need to make a file in /etc/udev/rules.d/ , e.g. > >> /etc/udev/rules.d/fcdproplus.rules, and it needs to contain the four lines > >> > >> SUBSYSTEMS=="usb" ATTRS{idVendor}=="04d8" > ATTRS{idProduct}=="fb56" > >> MODE:="0666" > >> SUBSYSTEMS=="usb" ATTRS{idVendor}=="04d8" > ATTRS{idProduct}=="fb31" > >> MODE:="0666" > >> > >> KERNEL=="hidraw*", ATTRS{busnum}=="1", ATTRS{idVendor}=="04d8", > >> ATTRS{idProduct}=="fb56", MODE="0666" > >> KERNEL=="hidraw*", ATTRS{busnum}=="1", ATTRS{idVendor}=="04d8", > >> ATTRS{idProduct}=="fb31", MODE="0666" > >> > >> after you've made that file, reboot. That's all. > >> > >> Best regards, > >> Marcus > > > > |
[Prev in Thread] | Current Thread | [Next in Thread] |