[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [GNU Radio 3.8] Error loading modules on E310
From: |
CEL |
Subject: |
Re: [GNU Radio 3.8] Error loading modules on E310 |
Date: |
Thu, 20 Feb 2020 19:41:47 +0000 |
Hi Ivan,
GNU Radio 3.7: Python2
GNU Radio 3.8: Py2 XOR Py3
GNU Radio >3.8: Py3
On Thu, 2020-02-20 at 19:35 +0100, Ivan Iudice wrote:
> Your help is very welcome!
> I’m sorry for the stupid question, however, how can I know which version of
> python is used by gnuradio?
>
> Ivan
>
> > Il giorno 20 feb 2020, alle ore 19:22, Philip Balister <address@hidden> ha
> > scritto:
> >
> > On 2/20/20 11:25 AM, Ivan Iudice wrote:
> > > Hi Philip!
> > > I only have site-package folder in both python2.7 and python3.5 lib
> > > folders, no dist-package.
> > > The problem is that in python3.5/site-package there is not numpy, it’s
> > > only in python2.7/site-package.
> > > Is it not installed for python3? How can I install it in both the sdk
> > > sysroot and in the target?
> >
> > hmm, is gnuradio on the e310 using python 2 or 3? Maybe mixed python
> > versions.
> >
> > Sorry for the short answer, trying to help, but I don't use the Ettus
> > builds for gnuradio.
> >
> > Philip
> >
> > > Thanks so much.
> > >
> > > Ivan
> > >
> > > > > Il giorno 20 feb 2020, alle ore 17:05, Philip Balister
> > > > > <address@hidden> ha scritto:
> > > >
> > > > I had some dist-packages versus site-packages with some versions of
> > > > gnuradio. See if both exist. I'm betting numpy is in site-packages.
> > > >
> > > > Philip
> > > >
> > > > > On 2/19/20 4:46 PM, Ivan Iudice wrote:
> > > > > I’m curious to know if there is somebody in the list developing for
> > > > > E310 using current SDK.
> > > > > This is a problem that, obviously, everybody wants execute custom
> > > > > module could incur.
> > > > > Any ideas?
> > > > >
> > > > > Ivan
> > > > >
> > > > > > > Il giorno 17 feb 2020, alle ore 17:31, address@hidden ha scritto:
> > > > > >
> > > > > >
> > > > > > Dear all,
> > > > > > finally I cross-compiled my OOT module for running on USRP E310.
> > > > > > Based on the instructions at
> > > > > > "https://kb.ettus.com/Software_Development_on_the_E3xx_USRP_-_Building_RFNoC_UHD_/_GNU_Radio_/_gr-ettus_from_Source",
> > > > > > I set the environment variable PYTHONPATH a little bit different,
> > > > > > to point the path of the installed OOT module:
> > > > > >
> > > > > > export
> > > > > > PYTHONPATH=$LOCALPREFIX/lib/python3.5/dist-packages:$PYTHONPATH
> > > > > >
> > > > > > Such a way, on the target I can load my custom module in python.
> > > > > > root@ni-e31x-316AFEA:~# python3 -c "import custom_mod"
> > > > > > I created a flowgraph that use my OOT module, and I discovered in
> > > > > > the newer file system for E310 python3 has not all of the needed
> > > > > > libraries.
> > > > > > root@ni-e31x-316AFEA:~# ./top_block.py
> > > > > > Traceback (most recent call last):
> > > > > > File "./top_block.py", line 12, in <module>
> > > > > > from gnuradio import blocks
> > > > > > File
> > > > > > "/home/root/localinstall/usr/lib/python3.5/dist-packages/gnuradio/blocks/__init__.py",
> > > > > > line 38, in <module>
> > > > > > from .stream_to_vector_decimator import *
> > > > > > File
> > > > > > "/home/root/localinstall/usr/lib/python3.5/dist-packages/gnuradio/blocks/stream_to_vector_decimator.py",
> > > > > > line 23, in <module>
> > > > > > from gnuradio import gr
> > > > > > File
> > > > > > "/home/root/localinstall/usr/lib/python3.5/dist-packages/gnuradio/gr/__init__.py",
> > > > > > line 46, in <module>
> > > > > > from .top_block import *
> > > > > > File
> > > > > > "/home/root/localinstall/usr/lib/python3.5/dist-packages/gnuradio/gr/top_block.py",
> > > > > > line 32, in <module>
> > > > > > from .hier_block2 import hier_block2
> > > > > > File
> > > > > > "/home/root/localinstall/usr/lib/python3.5/dist-packages/gnuradio/gr/hier_block2.py",
> > > > > > line 26, in <module>
> > > > > > import pmt
> > > > > > File
> > > > > > "/home/root/localinstall/usr/lib/python3.5/dist-packages/pmt/__init__.py",
> > > > > > line 61, in <module>
> > > > > > from .pmt_to_python import pmt_to_python as to_python
> > > > > > File
> > > > > > "/home/root/localinstall/usr/lib/python3.5/dist-packages/pmt/pmt_to_python.py",
> > > > > > line 23, in <module>
> > > > > > import numpy
> > > > > > ImportError: No module named 'numpy'
> > > > > > How could I solve the problem?
> > > > > > I'm so close to run my OOT modules on the target...
> > > > > > Thanks so much.
> > > > > > Ivan
> > > > > >
> > > > > >
> > > > > >
> > > > > > Con Tiscali Mobile Smart 30 4G hai minuti illimitati, 100 SMS e 30
> > > > > > Giga in 4G a soli 8,99€ al mese. http://tisca.li/smart30
> > > > > >
>
>
smime.p7s
Description: S/MIME cryptographic signature
- [GNU Radio 3.8] Error loading modules on E310, krono86, 2020/02/17
- Re: [GNU Radio 3.8] Error loading modules on E310, Ivan Iudice, 2020/02/19
- Re: [GNU Radio 3.8] Error loading modules on E310, Philip Balister, 2020/02/20
- Re: [GNU Radio 3.8] Error loading modules on E310, Ivan Iudice, 2020/02/20
- Re: [GNU Radio 3.8] Error loading modules on E310, Philip Balister, 2020/02/20
- Re: [GNU Radio 3.8] Error loading modules on E310, Ivan Iudice, 2020/02/20
- Re: [GNU Radio 3.8] Error loading modules on E310,
CEL <=
- Re: [GNU Radio 3.8] Error loading modules on E310, Philip Balister, 2020/02/20
- Re: [GNU Radio 3.8] Error loading modules on E310, Ivan Iudice, 2020/02/21
- Re: [GNU Radio 3.8] Error loading modules on E310, Philip Balister, 2020/02/21
- Re: [GNU Radio 3.8] Error loading modules on E310, Ivan Iudice, 2020/02/21
- Re: [GNU Radio 3.8] Error loading modules on E310, Philip Balister, 2020/02/21
- Re: [GNU Radio 3.8] Error loading modules on E310, Ivan Iudice, 2020/02/21
- Re: [GNU Radio 3.8] Error loading modules on E310, CEL, 2020/02/21
- Re: [GNU Radio 3.8] Error loading modules on E310, Ivan Iudice, 2020/02/21
- Re: [GNU Radio 3.8] Error loading modules on E310, Ivan Iudice, 2020/02/27