|
From: | Eamon Heaney |
Subject: | Re: [Discuss-gnuradio] Transmitting 802.11 packets with the HackRF w/out burst transmissions |
Date: | Wed, 6 Nov 2019 01:55:56 -0500 |
Hey,I was running into the same problem by running the 802.15.4 flowcharts with a Pluto SDR. To enable burst transmission I wrote a block that pads zeros to the end of a tagged stream to fill the buffer of the SDR.The block is added to bastibl's gr-foo OOT module. The Block is called "pad tagged stream". To use it you need to set the buffer size to the buffer size of the HackRF.Regards,AlexEamon Heaney <address@hidden> schrieb am Mi., 6. Nov. 2019, 07:10:Hi,Been working on this Gnuradio/HackRF wifi transmitter for a while now, and recently learned that the HackRF driver doesn't support burst transmission. I've been working off the wifi_tx example from bastibl's gr-ieee802-11 repo so far, but it looks like I'll need another approach.Is there another method that could transmit 802.11 packets that would work with the HackRF?Thanks!
--Eamon HeaneyFleet CommanderPresident, Model UN at Virginia Tech
[Prev in Thread] | Current Thread | [Next in Thread] |