Re: [Discuss-gnuradio] Installing GNURadio On Raspberry Pi

[lists]

I built it on a beagle board black, which is not as powerful as a RPI these 
days. This isn't all that fresh in my memory.

I don't recall having to set up VM beyond stock. Slow compilation...well yeah! 

It might just be me, but the only signal processng I ever found useful on those 
SBCs was ADSB decoding. Rtlsdr and some flavor of dump1090.



          Original Message  



From: address@hidden
Sent: April 24, 2019 12:51 AM
To: address@hidden; address@hidden; address@hidden
Subject: Re: [Discuss-gnuradio] Installing GNURadio On Raspberry Pi


Hi,

On Tue, 2019-04-23 at 19:31 -0700, lists wrote:
> https://wiki.gnuradio.org/index.php/Download

uhhh that wiki page is ... dated. It also doesn't solve the issue of
not being able to import gr-osmosdr, which isn't part of GNU Radio
itself!

Also, clearly *not* the way I'd recommend on a raspberry Pi:

What lazygranch recommends is a source build, which takes roughly
forever on a raspberry Pi, and requires use of copious amount of swap
memory, due to the limited amount of RAM of a Raspberry Pi.

So, if you can, get a binary installation of GNU Radio. It seems you
already have one!

Then, you'll need to make sure you've got a working gr-osmosdr
installation on your Pi. How did you install GNU Radio and gr-osmosdr
on your Raspberry Pi so far?

Best regards,
Marcus