discuss-gnuradio
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Discuss-gnuradio] Error compiling gnuradio v3.7.9


From: krono86
Subject: [Discuss-gnuradio] Error compiling gnuradio v3.7.9
Date: Thu, 04 Apr 2019 01:01:58 +0200

Hi guys!
I'm Ivan, researcher at Italian Aerospace Research Centre. I'm working on algorithms for optimizing aerospace communications based on SDR paradigm.
I will use an USRP E310, first in "network mode" for rapid troubleshooting of the algorithms. I correctly built the uhd drivers enabling the network mode using this procedure:
https://files.ettus.com/manual/page_usrp_e3x0.html#e3x0_uhd_build
Now I want to build gnuradio v3.7.9 on my linux machine (with Debian installed) to have the same version actually embedded on the E310, using this procedure:
https://wiki.gnuradio.org/index.php/BuildGuide
The problem is that when I run cmake, it exits with errors.
I will report below the output of cmake and the error logs.
address@hidden:~/workarea-gnuradio/gnuradio/build$ cmake -Wno-dev ../
-- The CXX compiler identification is GNU 6.3.0
-- The C compiler identification is GNU 6.3.0
-- Check for working CXX compiler: /usr/bin/c++
-- Check for working CXX compiler: /usr/bin/c++ -- works
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Detecting CXX compile features
-- Detecting CXX compile features - done
-- Check for working C compiler: /usr/bin/cc
-- Check for working C compiler: /usr/bin/cc -- works
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Detecting C compile features
-- Detecting C compile features - done
-- Build type not specified: defaulting to release.
-- Build type set to Release.
-- Found Git: /usr/bin/git  
-- Extracting version information from git describe...
-- Performing Test HAVE_VISIBILITY_HIDDEN
-- Performing Test HAVE_VISIBILITY_HIDDEN - Success
-- Performing Test HAVE_WARN_SIGN_COMPARE
-- Performing Test HAVE_WARN_SIGN_COMPARE - Success
-- Performing Test HAVE_WARN_ALL
-- Performing Test HAVE_WARN_ALL - Success
-- Performing Test HAVE_WARN_NO_UNINITIALIZED
-- Performing Test HAVE_WARN_NO_UNINITIALIZED - Success
-- Compiler Version: cc (Debian 6.3.0-18+deb9u1) 6.3.0 20170516
Copyright (C) 2016 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-- Compiler Flags: /usr/bin/cc:::-O3 -DNDEBUG  -fvisibility=hidden -Wsign-compare -Wall -Wno-uninitialized
/usr/bin/c++:::-O3 -DNDEBUG  -fvisibility=hidden -Wsign-compare -Wall -Wno-uninitialized
-- ADDING PERF COUNTERS
-- Building Static Libraries: OFF
-- Looking for pthread.h
-- Looking for pthread.h - found
-- Looking for pthread_create
-- Looking for pthread_create - not found
-- Looking for pthread_create in pthreads
-- Looking for pthread_create in pthreads - not found
-- Looking for pthread_create in pthread
-- Looking for pthread_create in pthread - found
-- Found Threads: TRUE  
-- Boost version: 1.62.0
-- Found the following Boost libraries:
--   date_time
--   program_options
--   filesystem
--   system
--   thread
--   chrono
--   atomic
-- Found PythonLibs: /usr/lib/x86_64-linux-gnu/libpython2.7.so (found suitable version "2.7.13", minimum required is "2")
--
-- Checking for module SWIG
-- Found SWIG version 3.0.10.
-- Found SWIG: /usr/bin/swig3.0  
--
-- The build system will automatically enable all components.
-- Use -DENABLE_DEFAULT=OFF to disable components by default.
--
-- Configuring python-support support...
--   Dependency PYTHONLIBS_FOUND = TRUE
--   Dependency SWIG_FOUND = TRUE
--   Dependency SWIG_VERSION_CHECK = TRUE
--   Enabling python-support support.
--   Override with -DENABLE_PYTHON=ON/OFF
-- Found PkgConfig: /usr/bin/pkg-config (found version "0.29")
-- Checking for module 'cppunit'
--   Found cppunit, version 1.13.2
-- Found CPPUNIT: /usr/lib/x86_64-linux-gnu/libcppunit.so;dl  
--
-- Configuring testing-support support...
--   Dependency CPPUNIT_FOUND = TRUE
--   Enabling testing-support support.
--   Override with -DENABLE_TESTING=ON/OFF
--
-- Configuring VOLK support...
-- Build type set to Release.
-- Extracting version information from git describe...
-- Found PythonInterp: /usr/bin/python2 (found suitable version "2.7.13", minimum required is "2")
--
-- Python checking for python >= 2.5
-- Python checking for python >= 2.5 - found
--
-- Python checking for Cheetah >= 2.0.0
-- Python checking for Cheetah >= 2.0.0 - found
-- Boost version: 1.62.0
-- Found the following Boost libraries:
--   filesystem
--   system
--   unit_test_framework
--   program_options
-- Checking for module 'orc-0.4 > 0.4.11'
--   Found orc-0.4 > 0.4.11, version 0.4.26
-- Found ORC: /usr/lib/x86_64-linux-gnu/liborc-0.4.so  
-- Found Doxygen: /usr/bin/doxygen (found version "1.8.13")
-- QA Testing is enabled.
--   Modify using: -DENABLE_TESTING=ON/OFF
-- Looking for cpuid.h
-- Looking for cpuid.h - found
-- Looking for intrin.h
-- Looking for intrin.h - not found
-- Looking for fenv.h
-- Looking for fenv.h - found
-- Looking for dlfcn.h
-- Looking for dlfcn.h - found
-- Compiler name: GNU
-- Performing Test HAVE_WERROR_UNUSED_CMD_LINE_ARG
-- Performing Test HAVE_WERROR_UNUSED_CMD_LINE_ARG - Failed
-- Looking for posix_memalign
-- Looking for posix_memalign - found
-- x86* CPU detected
/usr/bin/python2: can't open file '/home/krono/workarea-gnuradio/gnuradio/gen/volk_compile_utils.py': [Errno 2] No such file or directory
-- Check size of void*[8]
-- Check size of void*[8] - done
-- CPU width is 64 bits, Overruled arch 32
CMake Error at volk/lib/CMakeLists.txt:129 (list):
  list sub-command REMOVE_ITEM requires list to be present.
Call Stack (most recent call first):
  volk/lib/CMakeLists.txt:253 (OVERRULE_ARCH)


-- Available architectures:
/usr/bin/python2: can't open file '/home/krono/workarea-gnuradio/gnuradio/gen/volk_compile_utils.py': [Errno 2] No such file or directory
-- Available machines:
-- BUILD TYPE = RELEASE
-- Base cflags = -O3 -DNDEBUG  -fvisibility=hidden -Wsign-compare -Wall -Wno-uninitialized -Wall
-- Compiler Version: cc (Debian 6.3.0-18+deb9u1) 6.3.0 20170516
Copyright (C) 2016 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-- The ASM compiler identification is GNU
-- Found assembler: /usr/bin/cc
-- c flags:  -fvisibility=hidden -Wsign-compare -Wall -Wno-uninitialized -Wall;
-- asm flags:
-- Loading version 1.2 into constants...
-- Using install prefix: /usr/local
--
-- Configuring volk support...
--   Enabling volk support.
--   Override with -DENABLE_VOLK=ON/OFF
--   Override with -DENABLE_INTERNAL_VOLK=ON/OFF
-- Found LOG4CPP: /usr/lib/x86_64-linux-gnu/liblog4cpp.so
-- ENABLE_GR_LOG set to ON.
-- HAVE_LOG4CPP set to True.
-- LOG4CPP_LIBRARIES set to /usr/lib/x86_64-linux-gnu/liblog4cpp.so.
-- Found Sphinx: /usr/bin/sphinx-build  
--
-- Configuring doxygen support...
--   Dependency DOXYGEN_FOUND = YES
--   Enabling doxygen support.
--   Override with -DENABLE_DOXYGEN=ON/OFF
--
-- Configuring sphinx support...
--   Dependency SPHINX_FOUND = TRUE
--   Enabling sphinx support.
--   Override with -DENABLE_SPHINX=ON/OFF
-- Looking for C++ include netdb.h
-- Looking for C++ include netdb.h - found
-- Looking for C++ include sys/time.h
-- Looking for C++ include sys/time.h - found
-- Looking for C++ include sys/types.h
-- Looking for C++ include sys/types.h - found
-- Looking for C++ include sys/select.h
-- Looking for C++ include sys/select.h - found
-- Looking for C++ include sys/socket.h
-- Looking for C++ include sys/socket.h - found
-- Looking for C++ include io.h
-- Looking for C++ include io.h - not found
-- Looking for C++ include sys/mman.h
-- Looking for C++ include sys/mman.h - found
-- Looking for C++ include sys/ipc.h
-- Looking for C++ include sys/ipc.h - found
-- Looking for C++ include sys/shm.h
-- Looking for C++ include sys/shm.h - found
-- Looking for C++ include signal.h
-- Looking for C++ include signal.h - found
-- Looking for C++ include netinet/in.h
-- Looking for C++ include netinet/in.h - found
-- Looking for C++ include arpa/inet.h
-- Looking for C++ include arpa/inet.h - found
-- Looking for C++ include byteswap.h
-- Looking for C++ include byteswap.h - found
-- Looking for C++ include linux/ppdev.h
-- Looking for C++ include linux/ppdev.h - found
-- Looking for C++ include dev/ppbus/ppi.h
-- Looking for C++ include dev/ppbus/ppi.h - not found
-- Looking for C++ include unistd.h
-- Looking for C++ include unistd.h - found
-- Looking for C++ include malloc.h
-- Looking for C++ include malloc.h - found
-- Performing Test HAVE_SNPRINTF
-- Performing Test HAVE_SNPRINTF - Success
-- Performing Test HAVE_SIGACTION
-- Performing Test HAVE_SIGACTION - Success
-- Performing Test HAVE_SELECT
-- Performing Test HAVE_SELECT - Success
-- Performing Test HAVE_SYSCONF
-- Performing Test HAVE_SYSCONF - Success
-- Performing Test HAVE_GETPAGESIZE
-- Performing Test HAVE_GETPAGESIZE - Success
-- Performing Test HAVE_SSLEEP
-- Performing Test HAVE_SSLEEP - Failed
-- Performing Test HAVE_NANOSLEEP
-- Performing Test HAVE_NANOSLEEP - Success
-- Performing Test HAVE_GETTIMEOFDAY
-- Performing Test HAVE_GETTIMEOFDAY - Success
-- Performing Test HAVE_VALLOC
-- Performing Test HAVE_VALLOC - Success
-- Performing Test HAVE_PTHREAD_SIGMASK
-- Performing Test HAVE_PTHREAD_SIGMASK - Success
-- Performing Test HAVE_CREATEFILEMAPPING
-- Performing Test HAVE_CREATEFILEMAPPING - Failed
-- Performing Test HAVE_SHM_OPEN
-- Performing Test HAVE_SHM_OPEN - Success
-- Performing Test HAVE_SINCOS
-- Performing Test HAVE_SINCOS - Success
-- Performing Test HAVE_SINCOSF
-- Performing Test HAVE_SINCOSF - Success
-- Performing Test HAVE_SINF
-- Performing Test HAVE_SINF - Success
-- Performing Test HAVE_COSF
-- Performing Test HAVE_COSF - Success
-- Performing Test HAVE_MMAP
-- Performing Test HAVE_MMAP - Success
-- Performing Test HAVE_PTHREAD_SETSCHEDPARAM
-- Performing Test HAVE_PTHREAD_SETSCHEDPARAM - Success
-- Performing Test HAVE_SCHED_SETSCHEDULER
-- Performing Test HAVE_SCHED_SETSCHEDULER - Success
--
-- Configuring gnuradio-runtime support...
--   Dependency Boost_FOUND = 1
--   Dependency ENABLE_VOLK = ON
--   Dependency PYTHONINTERP_FOUND = TRUE
--   Enabling gnuradio-runtime support.
--   Override with -DENABLE_GNURADIO_RUNTIME=ON/OFF
--
-- Configuring gr-ctrlport support...
--   Dependency Boost_FOUND = 1
--   Dependency SWIG_FOUND = TRUE
--   Dependency SWIG_VERSION_CHECK = TRUE
--   Dependency ENABLE_GNURADIO_RUNTIME = ON
--   Enabling gr-ctrlport support.
--   Override with -DENABLE_GR_CTRLPORT=ON/OFF
-- Looking for C++ include sys/resource.h
-- Looking for C++ include sys/resource.h - found
-- Loading build date Wed, 03 Apr 2019 22:43:04 into constants...
-- Loading version 3.7.9 into constants...
-- Checking for module 'thrift'
--   No package 'thrift' found
-- Could not find appropriate version of Thrift: 0.9.1 < 0.9.2
-- Looking for C++ include windows.h
-- Looking for C++ include windows.h - not found
-- TRY_SHM_VMCIRCBUF set to ON.
-- Performing Test HAVE_WNO_UNUSED_BUT_SET_VARIABLE
-- Performing Test HAVE_WNO_UNUSED_BUT_SET_VARIABLE - Success
--
-- Configuring gr-blocks support...
--   Dependency Boost_FOUND = 1
--   Dependency ENABLE_GNURADIO_RUNTIME = ON
--   Enabling gr-blocks support.
--   Override with -DENABLE_GR_BLOCKS=ON/OFF
--
-- Python checking for python >= 2.5
-- Python checking for python >= 2.5 - found
--
-- Python checking for Cheetah >= 2.0.0
-- Python checking for Cheetah >= 2.0.0 - found
--
-- Python checking for lxml >= 1.3.6
-- Python checking for lxml >= 1.3.6 - found
--
-- Python checking for pygtk >= 2.10.0
-- Python checking for pygtk >= 2.10.0 - found
--
-- Python checking for numpy
-- Python checking for numpy - found
--
-- Configuring gnuradio-companion support...
--   Dependency ENABLE_GNURADIO_RUNTIME = ON
--   Dependency ENABLE_PYTHON = ON
--   Dependency PYTHON_MIN_VER_FOUND = TRUE
--   Dependency CHEETAH_FOUND = TRUE
--   Dependency LXML_FOUND = TRUE
--   Dependency PYGTK_FOUND = TRUE
--   Dependency NUMPY_FOUND = TRUE
--   Enabling gnuradio-companion support.
--   Override with -DENABLE_GRC=ON/OFF
-- Checking for module 'gsl >= 1.10'
--   Found gsl , version 2.3
-- Found GSL: gsl;gslcblas;m  
--
-- Configuring gr-fec support...
--   Dependency ENABLE_VOLK = ON
--   Dependency Boost_FOUND = 1
--   Dependency ENABLE_GNURADIO_RUNTIME = ON
--   Dependency ENABLE_GR_BLOCKS = ON
--   Enabling gr-fec support.
--   Override with -DENABLE_GR_FEC=ON/OFF
-- Checking for module 'fftw3f >= 3.0'
--   Found fftw3f , version 3.3.5
-- Found FFTW3F: /usr/lib/x86_64-linux-gnu/libfftw3f.so  
--
-- Configuring gr-fft support...
--   Dependency ENABLE_VOLK = ON
--   Dependency Boost_FOUND = 1
--   Dependency ENABLE_GNURADIO_RUNTIME = ON
--   Dependency ENABLE_GR_BLOCKS = ON
--   Dependency FFTW3F_FOUND = TRUE
--   Enabling gr-fft support.
--   Override with -DENABLE_GR_FFT=ON/OFF
--
-- Configuring gr-filter support...
--   Dependency ENABLE_VOLK = ON
--   Dependency Boost_FOUND = 1
--   Dependency ENABLE_GNURADIO_RUNTIME = ON
--   Dependency ENABLE_GR_FFT = ON
--   Dependency ENABLE_GR_BLOCKS = ON
--   Enabling gr-filter support.
--   Override with -DENABLE_GR_FILTER=ON/OFF
--
-- Configuring gr-analog support...
--   Dependency Boost_FOUND = 1
--   Dependency ENABLE_VOLK = ON
--   Dependency ENABLE_GNURADIO_RUNTIME = ON
--   Dependency ENABLE_GR_FFT = ON
--   Dependency ENABLE_GR_FILTER = ON
--   Enabling gr-analog support.
--   Override with -DENABLE_GR_ANALOG=ON/OFF
--
-- Configuring gr-digital support...
--   Dependency Boost_FOUND = 1
--   Dependency ENABLE_VOLK = ON
--   Dependency ENABLE_GNURADIO_RUNTIME = ON
--   Dependency ENABLE_GR_FFT = ON
--   Dependency ENABLE_GR_FILTER = ON
--   Dependency ENABLE_GR_BLOCKS = ON
--   Dependency ENABLE_GR_ANALOG = ON
--   Dependency ENABLE_GR_BLOCKS = ON
--   Dependency ENABLE_GR_FILTER = ON
--   Enabling gr-digital support.
--   Override with -DENABLE_GR_DIGITAL=ON/OFF
--
-- Configuring gr-dtv support...
--   Dependency Boost_FOUND = 1
--   Dependency ENABLE_GNURADIO_RUNTIME = ON
--   Dependency ENABLE_GR_ANALOG = ON
--   Dependency ENABLE_GR_FILTER = ON
--   Dependency ENABLE_GR_FEC = ON
--   Enabling gr-dtv support.
--   Override with -DENABLE_GR_DTV=ON/OFF
-- Performing Test SSE2_SUPPORTED
-- Performing Test SSE2_SUPPORTED - Success
--
-- Configuring gr-atsc support...
--   Dependency Boost_FOUND = 1
--   Dependency ENABLE_GNURADIO_RUNTIME = ON
--   Dependency ENABLE_GR_FFT = ON
--   Dependency ENABLE_GR_BLOCKS = ON
--   Dependency ENABLE_GR_FEC = ON
--   Dependency ENABLE_GR_FILTER = ON
--   Dependency ENABLE_GR_ANALOG = ON
--   Enabling gr-atsc support.
--   Override with -DENABLE_GR_ATSC=ON/OFF
--
-- Configuring gr-audio support...
--   Dependency Boost_FOUND = 1
--   Dependency ENABLE_GNURADIO_RUNTIME = ON
--   Enabling gr-audio support.
--   Override with -DENABLE_GR_AUDIO=ON/OFF
-- Checking for module 'alsa'
--   Found alsa, version 1.1.3
-- Found ALSA 1.1.3
-- Checking for module 'jack'
--   Found jack, version 1.9.11
-- Found jack: /usr/lib/x86_64-linux-gnu/libjack.so
-- Looking for C++ include AudioUnit/AudioUnit.h
-- Looking for C++ include AudioUnit/AudioUnit.h - not found
-- Looking for C++ include AudioToolbox/AudioToolbox.h
-- Looking for C++ include AudioToolbox/AudioToolbox.h - not found
-- Checking for module 'portaudio-2.0'
--   Found portaudio-2.0, version 19
-- Performing Test PORTAUDIO2_FOUND
-- Performing Test PORTAUDIO2_FOUND - Success
-- Found PORTAUDIO: /usr/include  
-- Checking for module 'comedilib'
--   Found comedilib, version 0.10.2
--
-- Configuring gr-comedi support...
--   Dependency COMEDI_FOUND = 1
--   Dependency Boost_FOUND = 1
--   Dependency ENABLE_GNURADIO_RUNTIME = ON
--   Enabling gr-comedi support.
--   Override with -DENABLE_GR_COMEDI=ON/OFF
--
-- Configuring gr-channels support...
--   Dependency ENABLE_VOLK = ON
--   Dependency Boost_FOUND = 1
--   Dependency ENABLE_GNURADIO_RUNTIME = ON
--   Dependency ENABLE_GR_BLOCKS = ON
--   Dependency ENABLE_GR_FFT = ON
--   Dependency ENABLE_GR_FILTER = ON
--   Dependency ENABLE_GR_ANALOG = ON
--   Enabling gr-channels support.
--   Override with -DENABLE_GR_CHANNELS=ON/OFF
--
-- Configuring gr-noaa support...
--   Dependency Boost_FOUND = 1
--   Dependency ENABLE_GNURADIO_RUNTIME = ON
--   Dependency ENABLE_GR_BLOCKS = ON
--   Enabling gr-noaa support.
--   Override with -DENABLE_GR_NOAA=ON/OFF
--
-- Configuring gr-pager support...
--   Dependency Boost_FOUND = 1
--   Dependency ENABLE_GNURADIO_RUNTIME = ON
--   Dependency ENABLE_GR_FILTER = ON
--   Dependency ENABLE_GR_ANALOG = ON
--   Enabling gr-pager support.
--   Override with -DENABLE_GR_PAGER=ON/OFF
-- Looking for Q_WS_X11
-- Looking for Q_WS_X11 - found
-- Looking for Q_WS_WIN
-- Looking for Q_WS_WIN - not found
-- Looking for Q_WS_QWS
-- Looking for Q_WS_QWS - not found
-- Looking for Q_WS_MAC
-- Looking for Q_WS_MAC - not found
-- Found Qt4: /usr/bin/qmake (found suitable version "4.8.7", minimum required is "4.2.0")
-- QWT Version: 6.1.2
-- Found Qwt: /usr/lib/libqwt.so  
--
-- Python checking for PyQt4
-- Python checking for PyQt4 - found
--
-- Configuring gr-qtgui support...
--   Dependency Boost_FOUND = 1
--   Dependency QT4_FOUND = TRUE
--   Dependency QWT_FOUND = TRUE
--   Dependency ENABLE_VOLK = ON
--   Dependency ENABLE_GNURADIO_RUNTIME = ON
--   Dependency ENABLE_GR_FFT = ON
--   Dependency ENABLE_GR_FILTER = ON
--   Dependency PYTHONLIBS_FOUND = TRUE
--   Dependency PYQT4_FOUND = TRUE
--   Enabling gr-qtgui support.
--   Override with -DENABLE_GR_QTGUI=ON/OFF
--
-- Configuring gr-trellis support...
--   Dependency Boost_FOUND = 1
--   Dependency ENABLE_GNURADIO_RUNTIME = ON
--   Dependency ENABLE_GR_ANALOG = ON
--   Dependency ENABLE_GR_BLOCKS = ON
--   Dependency ENABLE_GR_DIGITAL = ON
--   Enabling gr-trellis support.
--   Override with -DENABLE_GR_TRELLIS=ON/OFF
-- Found UHD: /usr/local/lib/libuhd.so  
--
-- Configuring gr-uhd support...
--   Dependency Boost_FOUND = 1
--   Dependency UHD_FOUND = TRUE
--   Dependency ENABLE_GNURADIO_RUNTIME = ON
--   Dependency ENABLE_GR_FILTER = ON
--   Dependency ENABLE_GR_BLOCKS = ON
--   Dependency ENABLE_GR_ANALOG = ON
--   Enabling gr-uhd support.
--   Override with -DENABLE_GR_UHD=ON/OFF
--   UHD Version: 3.9.2
--
-- Configuring gr-utils support...
--   Dependency ENABLE_GNURADIO_RUNTIME = ON
--   Dependency ENABLE_PYTHON = ON
--   Enabling gr-utils support.
--   Override with -DENABLE_GR_UTILS=ON/OFF
-- Found SDL: /usr/lib/x86_64-linux-gnu/libSDLmain.a;/usr/lib/x86_64-linux-gnu/libSDL.so;-lpthread (found version "1.2.15")
--
-- Configuring gr-video-sdl support...
--   Dependency SDL_FOUND = TRUE
--   Dependency Boost_FOUND = 1
--   Dependency ENABLE_GNURADIO_RUNTIME = ON
--   Enabling gr-video-sdl support.
--   Override with -DENABLE_GR_VIDEO_SDL=ON/OFF
--
-- Configuring gr-vocoder support...
--   Dependency Boost_FOUND = 1
--   Dependency ENABLE_GNURADIO_RUNTIME = ON
--   Dependency ENABLE_GR_FFT = ON
--   Dependency ENABLE_GR_BLOCKS = ON
--   Dependency ENABLE_GR_FILTER = ON
--   Dependency ENABLE_GR_ANALOG = ON
--   Enabling gr-vocoder support.
--   Override with -DENABLE_GR_VOCODER=ON/OFF
-- Found libgsm: /usr/include, /usr/lib/x86_64-linux-gnu/libgsm.so
-- Found libcodec2: /usr/include/codec2, /usr/lib/x86_64-linux-gnu/libcodec2.so
-- Checking for module 'libusb-1.0'
--   Found libusb-1.0, version 1.0.21
-- Found libusb-1.0: /usr/include/libusb-1.0, /usr/lib/x86_64-linux-gnu/libusb-1.0.so
--
-- Configuring gr-fcd support...
--   Dependency Boost_FOUND = 1
--   Dependency ENABLE_GNURADIO_RUNTIME = ON
--   Dependency ENABLE_GR_BLOCKS = ON
--   Dependency ENABLE_GR_AUDIO = ON
--   Dependency LIBUSB_FOUND = TRUE
--   Enabling gr-fcd support.
--   Override with -DENABLE_GR_FCD=ON/OFF
--
-- Configuring gr-wavelet support...
--   Dependency Boost_FOUND = 1
--   Dependency ENABLE_GNURADIO_RUNTIME = ON
--   Dependency ENABLE_GR_BLOCKS = ON
--   Dependency ENABLE_GR_ANALOG = ON
--   Dependency GSL_FOUND = TRUE
--   Enabling gr-wavelet support.
--   Override with -DENABLE_GR_WAVELET=ON/OFF
--
-- Python checking for wx >= 2.8
-- Python checking for wx >= 2.8 - found
--
-- Python checking for numpy
-- Python checking for numpy - found
--
-- Configuring gr-wxgui support...
--   Dependency ENABLE_GNURADIO_RUNTIME = ON
--   Dependency ENABLE_GR_FFT = ON
--   Dependency ENABLE_GR_FILTER = ON
--   Dependency ENABLE_GR_ANALOG = ON
--   Dependency ENABLE_PYTHON = ON
--   Dependency NUMPY_FOUND = TRUE
--   Dependency WX_FOUND = TRUE
--   Enabling gr-wxgui support.
--   Override with -DENABLE_GR_WXGUI=ON/OFF
-- Checking for module 'libzmq'
--   Found libzmq, version 4.2.1
-- Found ZEROMQ: /usr/lib/x86_64-linux-gnu/libzmq.so  
--
-- Configuring gr-zeromq support...
--   Dependency Boost_FOUND = 1
--   Dependency ENABLE_GNURADIO_RUNTIME = ON
--   Dependency ZEROMQ_FOUND = TRUE
--   Enabling gr-zeromq support.
--   Override with -DENABLE_GR_ZEROMQ=ON/OFF
--
-- ######################################################
-- # Gnuradio enabled components                         
-- ######################################################
--   * python-support
--   * testing-support
--   * volk
--   * doxygen
--   * sphinx
--   * gnuradio-runtime
--   * gr-ctrlport
--   * gr-blocks
--   * gnuradio-companion
--   * gr-fec
--   * gr-fft
--   * gr-filter
--   * gr-analog
--   * gr-digital
--   * gr-dtv
--   * gr-atsc
--   * gr-audio
--   * * alsa
--   * * oss
--   * * jack
--   * * portaudio
--   * gr-comedi
--   * gr-channels
--   * gr-noaa
--   * gr-pager
--   * gr-qtgui
--   * gr-trellis
--   * gr-uhd
--   * gr-utils
--   * gr-video-sdl
--   * gr-vocoder
--   * gr-fcd
--   * gr-wavelet
--   * gr-wxgui
--   * gr-zeromq
--
-- ######################################################
-- # Gnuradio disabled components                        
-- ######################################################
--
-- Using install prefix: /usr/local
-- Building for version: 3.7.9 / 3.7.9
-- Configuring incomplete, errors occurred!
See also "/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeOutput.log".
See also "/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeError.log".
address@hidden:~/workarea-gnuradio/gnuradio/build$ cat CMakeFiles/CMakeError.log
Determining if the pthread_create exist failed with the following output:
Change Dir: /home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp

Run Build Command:"/usr/bin/make" "cmTC_f5151/fast"
/usr/bin/make -f CMakeFiles/cmTC_f5151.dir/build.make CMakeFiles/cmTC_f5151.dir/build
make[1]: Entering directory '/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp'
Building C object CMakeFiles/cmTC_f5151.dir/CheckSymbolExists.c.o
/usr/bin/cc    -fvisibility=hidden -Wsign-compare -Wall -Wno-uninitialized    -o CMakeFiles/cmTC_f5151.dir/CheckSymbolExists.c.o   -c /home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp/CheckSymbolExists.c
Linking C executable cmTC_f5151
/usr/bin/cmake -E cmake_link_script CMakeFiles/cmTC_f5151.dir/link.txt --verbose=1
/usr/bin/cc   -fvisibility=hidden -Wsign-compare -Wall -Wno-uninitialized     CMakeFiles/cmTC_f5151.dir/CheckSymbolExists.c.o  -o cmTC_f5151 -rdynamic
CMakeFiles/cmTC_f5151.dir/CheckSymbolExists.c.o: In function `main':
CheckSymbolExists.c:(.text+0x1b): undefined reference to `pthread_create'
collect2: error: ld returned 1 exit status
CMakeFiles/cmTC_f5151.dir/build.make:97: recipe for target 'cmTC_f5151' failed
make[1]: *** [cmTC_f5151] Error 1
make[1]: Leaving directory '/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp'
Makefile:126: recipe for target 'cmTC_f5151/fast' failed
make: *** [cmTC_f5151/fast] Error 2

File /home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp/CheckSymbolExists.c:
/* */
#include <pthread.h>

int main(int argc, char** argv)
{
  (void)argv;
#ifndef pthread_create
  return ((int*)(&pthread_create))[argc];
#else
  (void)argc;
  return 0;
#endif
}

Determining if the function pthread_create exists in the pthreads failed with the following output:
Change Dir: /home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp

Run Build Command:"/usr/bin/make" "cmTC_85606/fast"
/usr/bin/make -f CMakeFiles/cmTC_85606.dir/build.make CMakeFiles/cmTC_85606.dir/build
make[1]: Entering directory '/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp'
Building C object CMakeFiles/cmTC_85606.dir/CheckFunctionExists.c.o
/usr/bin/cc    -fvisibility=hidden -Wsign-compare -Wall -Wno-uninitialized -DCHECK_FUNCTION_EXISTS=pthread_create   -o CMakeFiles/cmTC_85606.dir/CheckFunctionExists.c.o   -c /usr/share/cmake-3.7/Modules/CheckFunctionExists.c
Linking C executable cmTC_85606
/usr/bin/cmake -E cmake_link_script CMakeFiles/cmTC_85606.dir/link.txt --verbose=1
/usr/bin/cc   -fvisibility=hidden -Wsign-compare -Wall -Wno-uninitialized -DCHECK_FUNCTION_EXISTS=pthread_create    CMakeFiles/cmTC_85606.dir/CheckFunctionExists.c.o  -o cmTC_85606 -rdynamic -lpthreads
/usr/bin/ld: cannot find -lpthreads
collect2: error: ld returned 1 exit status
CMakeFiles/cmTC_85606.dir/build.make:97: recipe for target 'cmTC_85606' failed
make[1]: *** [cmTC_85606] Error 1
make[1]: Leaving directory '/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp'
Makefile:126: recipe for target 'cmTC_85606/fast' failed
make: *** [cmTC_85606/fast] Error 2


Determining if the include file intrin.h exists failed with the following output:
Change Dir: /home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp

Run Build Command:"/usr/bin/make" "cmTC_beaf5/fast"
/usr/bin/make -f CMakeFiles/cmTC_beaf5.dir/build.make CMakeFiles/cmTC_beaf5.dir/build
make[1]: Entering directory '/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp'
Building C object CMakeFiles/cmTC_beaf5.dir/CheckIncludeFile.c.o
/usr/bin/cc    -fvisibility=hidden -Wsign-compare -Wall -Wno-uninitialized -Wall    -o CMakeFiles/cmTC_beaf5.dir/CheckIncludeFile.c.o   -c /home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp/CheckIncludeFile.c
/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp/CheckIncludeFile.c:1:20: fatal error: intrin.h: No such file or directory
 #include <intrin.h>
                    ^
compilation terminated.
CMakeFiles/cmTC_beaf5.dir/build.make:65: recipe for target 'CMakeFiles/cmTC_beaf5.dir/CheckIncludeFile.c.o' failed
make[1]: *** [CMakeFiles/cmTC_beaf5.dir/CheckIncludeFile.c.o] Error 1
make[1]: Leaving directory '/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp'
Makefile:126: recipe for target 'cmTC_beaf5/fast' failed
make: *** [cmTC_beaf5/fast] Error 2


Performing C++ SOURCE FILE Test HAVE_WERROR_UNUSED_CMD_LINE_ARG failed with the following output:
Change Dir: /home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp

Run Build Command:"/usr/bin/make" "cmTC_cf804/fast"
/usr/bin/make -f CMakeFiles/cmTC_cf804.dir/build.make CMakeFiles/cmTC_cf804.dir/build
make[1]: Entering directory '/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp'
Building CXX object CMakeFiles/cmTC_cf804.dir/src.cxx.o
/usr/bin/c++     -fvisibility=hidden -Wsign-compare -Wall -Wno-uninitialized -Wall -DHAVE_WERROR_UNUSED_CMD_LINE_ARG   -Werror=unused-command-line-argument -o CMakeFiles/cmTC_cf804.dir/src.cxx.o -c /home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp/src.cxx
cc1plus: error: -Werror=unused-command-line-argument: no option -Wunused-command-line-argument
CMakeFiles/cmTC_cf804.dir/build.make:65: recipe for target 'CMakeFiles/cmTC_cf804.dir/src.cxx.o' failed
make[1]: *** [CMakeFiles/cmTC_cf804.dir/src.cxx.o] Error 1
make[1]: Leaving directory '/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp'
Makefile:126: recipe for target 'cmTC_cf804/fast' failed
make: *** [cmTC_cf804/fast] Error 2

Source file was:
int main() { return 0; }
Determining if the include file io.h exists failed with the following output:
Change Dir: /home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp

Run Build Command:"/usr/bin/make" "cmTC_7fa70/fast"
/usr/bin/make -f CMakeFiles/cmTC_7fa70.dir/build.make CMakeFiles/cmTC_7fa70.dir/build
make[1]: Entering directory '/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp'
Building CXX object CMakeFiles/cmTC_7fa70.dir/CheckIncludeFile.cxx.o
/usr/bin/c++     -fvisibility=hidden -Wsign-compare -Wall -Wno-uninitialized    -o CMakeFiles/cmTC_7fa70.dir/CheckIncludeFile.cxx.o -c /home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp/CheckIncludeFile.cxx
/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp/CheckIncludeFile.cxx:1:16: fatal error: io.h: No such file or directory
 #include <io.h>
                ^
compilation terminated.
CMakeFiles/cmTC_7fa70.dir/build.make:65: recipe for target 'CMakeFiles/cmTC_7fa70.dir/CheckIncludeFile.cxx.o' failed
make[1]: *** [CMakeFiles/cmTC_7fa70.dir/CheckIncludeFile.cxx.o] Error 1
make[1]: Leaving directory '/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp'
Makefile:126: recipe for target 'cmTC_7fa70/fast' failed
make: *** [cmTC_7fa70/fast] Error 2


Determining if the include file dev/ppbus/ppi.h exists failed with the following output:
Change Dir: /home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp

Run Build Command:"/usr/bin/make" "cmTC_b4ff9/fast"
/usr/bin/make -f CMakeFiles/cmTC_b4ff9.dir/build.make CMakeFiles/cmTC_b4ff9.dir/build
make[1]: Entering directory '/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp'
Building CXX object CMakeFiles/cmTC_b4ff9.dir/CheckIncludeFile.cxx.o
/usr/bin/c++     -fvisibility=hidden -Wsign-compare -Wall -Wno-uninitialized    -o CMakeFiles/cmTC_b4ff9.dir/CheckIncludeFile.cxx.o -c /home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp/CheckIncludeFile.cxx
/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp/CheckIncludeFile.cxx:1:27: fatal error: dev/ppbus/ppi.h: No such file or directory
 #include <dev/ppbus/ppi.h>
                           ^
compilation terminated.
CMakeFiles/cmTC_b4ff9.dir/build.make:65: recipe for target 'CMakeFiles/cmTC_b4ff9.dir/CheckIncludeFile.cxx.o' failed
make[1]: *** [CMakeFiles/cmTC_b4ff9.dir/CheckIncludeFile.cxx.o] Error 1
make[1]: Leaving directory '/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp'
Makefile:126: recipe for target 'cmTC_b4ff9/fast' failed
make: *** [cmTC_b4ff9/fast] Error 2


Performing C++ SOURCE FILE Test HAVE_SSLEEP failed with the following output:
Change Dir: /home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp

Run Build Command:"/usr/bin/make" "cmTC_9e4e6/fast"
/usr/bin/make -f CMakeFiles/cmTC_9e4e6.dir/build.make CMakeFiles/cmTC_9e4e6.dir/build
make[1]: Entering directory '/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp'
Building CXX object CMakeFiles/cmTC_9e4e6.dir/src.cxx.o
/usr/bin/c++     -fvisibility=hidden -Wsign-compare -Wall -Wno-uninitialized -DHAVE_SSLEEP   -o CMakeFiles/cmTC_9e4e6.dir/src.cxx.o -c /home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp/src.cxx
/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp/src.cxx:2:25: fatal error: Winbase.h: No such file or directory
     #include <Winbase.h>
                         ^
compilation terminated.
CMakeFiles/cmTC_9e4e6.dir/build.make:65: recipe for target 'CMakeFiles/cmTC_9e4e6.dir/src.cxx.o' failed
make[1]: *** [CMakeFiles/cmTC_9e4e6.dir/src.cxx.o] Error 1
make[1]: Leaving directory '/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp'
Makefile:126: recipe for target 'cmTC_9e4e6/fast' failed
make: *** [cmTC_9e4e6/fast] Error 2

Source file was:

    #include <Winbase.h>
    int main(){Sleep(0); return 0;}
    
Performing C++ SOURCE FILE Test HAVE_CREATEFILEMAPPING failed with the following output:
Change Dir: /home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp

Run Build Command:"/usr/bin/make" "cmTC_9e3c5/fast"
/usr/bin/make -f CMakeFiles/cmTC_9e3c5.dir/build.make CMakeFiles/cmTC_9e3c5.dir/build
make[1]: Entering directory '/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp'
Building CXX object CMakeFiles/cmTC_9e3c5.dir/src.cxx.o
/usr/bin/c++     -fvisibility=hidden -Wsign-compare -Wall -Wno-uninitialized -DHAVE_CREATEFILEMAPPING   -o CMakeFiles/cmTC_9e3c5.dir/src.cxx.o -c /home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp/src.cxx
/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp/src.cxx:2:25: fatal error: windows.h: No such file or directory
     #include <windows.h>
                         ^
compilation terminated.
CMakeFiles/cmTC_9e3c5.dir/build.make:65: recipe for target 'CMakeFiles/cmTC_9e3c5.dir/src.cxx.o' failed
make[1]: *** [CMakeFiles/cmTC_9e3c5.dir/src.cxx.o] Error 1
make[1]: Leaving directory '/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp'
Makefile:126: recipe for target 'cmTC_9e3c5/fast' failed
make: *** [cmTC_9e3c5/fast] Error 2

Source file was:

    #include <windows.h>
    int main(){
        HANDLE handle;
        int size;
        LPCTSTR lpName;
        handle = CreateFileMapping(
                         INVALID_HANDLE_VALUE,    // use paging file
                         NULL,                    // default security
                         PAGE_READWRITE,          // read/write access
                         0,                       // max. object size
                         size,                    // buffer size
                         lpName);                 // name of mapping object
        return 0;
    }
Determining if the include file windows.h exists failed with the following output:
Change Dir: /home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp

Run Build Command:"/usr/bin/make" "cmTC_c64ac/fast"
/usr/bin/make -f CMakeFiles/cmTC_c64ac.dir/build.make CMakeFiles/cmTC_c64ac.dir/build
make[1]: Entering directory '/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp'
Building CXX object CMakeFiles/cmTC_c64ac.dir/CheckIncludeFile.cxx.o
/usr/bin/c++     -fvisibility=hidden -Wsign-compare -Wall -Wno-uninitialized    -o CMakeFiles/cmTC_c64ac.dir/CheckIncludeFile.cxx.o -c /home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp/CheckIncludeFile.cxx
/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp/CheckIncludeFile.cxx:1:21: fatal error: windows.h: No such file or directory
 #include <windows.h>
                     ^
compilation terminated.
CMakeFiles/cmTC_c64ac.dir/build.make:65: recipe for target 'CMakeFiles/cmTC_c64ac.dir/CheckIncludeFile.cxx.o' failed
make[1]: *** [CMakeFiles/cmTC_c64ac.dir/CheckIncludeFile.cxx.o] Error 1
make[1]: Leaving directory '/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp'
Makefile:126: recipe for target 'cmTC_c64ac/fast' failed
make: *** [cmTC_c64ac/fast] Error 2


Determining if the include file AudioUnit/AudioUnit.h exists failed with the following output:
Change Dir: /home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp

Run Build Command:"/usr/bin/make" "cmTC_dfba5/fast"
/usr/bin/make -f CMakeFiles/cmTC_dfba5.dir/build.make CMakeFiles/cmTC_dfba5.dir/build
make[1]: Entering directory '/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp'
Building CXX object CMakeFiles/cmTC_dfba5.dir/CheckIncludeFile.cxx.o
/usr/bin/c++     -fvisibility=hidden -Wsign-compare -Wall -Wno-uninitialized    -o CMakeFiles/cmTC_dfba5.dir/CheckIncludeFile.cxx.o -c /home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp/CheckIncludeFile.cxx
/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp/CheckIncludeFile.cxx:1:33: fatal error: AudioUnit/AudioUnit.h: No such file or directory
 #include <AudioUnit/AudioUnit.h>
                                 ^
compilation terminated.
CMakeFiles/cmTC_dfba5.dir/build.make:65: recipe for target 'CMakeFiles/cmTC_dfba5.dir/CheckIncludeFile.cxx.o' failed
make[1]: *** [CMakeFiles/cmTC_dfba5.dir/CheckIncludeFile.cxx.o] Error 1
make[1]: Leaving directory '/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp'
Makefile:126: recipe for target 'cmTC_dfba5/fast' failed
make: *** [cmTC_dfba5/fast] Error 2


Determining if the include file AudioToolbox/AudioToolbox.h exists failed with the following output:
Change Dir: /home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp

Run Build Command:"/usr/bin/make" "cmTC_f42fb/fast"
/usr/bin/make -f CMakeFiles/cmTC_f42fb.dir/build.make CMakeFiles/cmTC_f42fb.dir/build
make[1]: Entering directory '/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp'
Building CXX object CMakeFiles/cmTC_f42fb.dir/CheckIncludeFile.cxx.o
/usr/bin/c++     -fvisibility=hidden -Wsign-compare -Wall -Wno-uninitialized    -o CMakeFiles/cmTC_f42fb.dir/CheckIncludeFile.cxx.o -c /home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp/CheckIncludeFile.cxx
/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp/CheckIncludeFile.cxx:1:39: fatal error: AudioToolbox/AudioToolbox.h: No such file or directory
 #include <AudioToolbox/AudioToolbox.h>
                                       ^
compilation terminated.
CMakeFiles/cmTC_f42fb.dir/build.make:65: recipe for target 'CMakeFiles/cmTC_f42fb.dir/CheckIncludeFile.cxx.o' failed
make[1]: *** [CMakeFiles/cmTC_f42fb.dir/CheckIncludeFile.cxx.o] Error 1
make[1]: Leaving directory '/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp'
Makefile:126: recipe for target 'cmTC_f42fb/fast' failed
make: *** [cmTC_f42fb/fast] Error 2


Determining if the Q_WS_WIN exist failed with the following output:
Change Dir: /home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp

Run Build Command:"/usr/bin/make" "cmTC_9cca0/fast"
/usr/bin/make -f CMakeFiles/cmTC_9cca0.dir/build.make CMakeFiles/cmTC_9cca0.dir/build
make[1]: Entering directory '/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp'
Building CXX object CMakeFiles/cmTC_9cca0.dir/CheckSymbolExists.cxx.o
/usr/bin/c++    -I/usr/include/qt4  -fvisibility=hidden -Wsign-compare -Wall -Wno-uninitialized    -o CMakeFiles/cmTC_9cca0.dir/CheckSymbolExists.cxx.o -c /home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp/CheckSymbolExists.cxx
/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp/CheckSymbolExists.cxx: In function ‘int main(int, char**)’:
/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp/CheckSymbolExists.cxx:8:19: error: ‘Q_WS_WIN’ was not declared in this scope
   return ((int*)(&Q_WS_WIN))[argc];
                   ^~~~~~~~
CMakeFiles/cmTC_9cca0.dir/build.make:65: recipe for target 'CMakeFiles/cmTC_9cca0.dir/CheckSymbolExists.cxx.o' failed
make[1]: *** [CMakeFiles/cmTC_9cca0.dir/CheckSymbolExists.cxx.o] Error 1
make[1]: Leaving directory '/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp'
Makefile:126: recipe for target 'cmTC_9cca0/fast' failed
make: *** [cmTC_9cca0/fast] Error 2

File /home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp/CheckSymbolExists.cxx:
/* */
#include <QtCore/qglobal.h>

int main(int argc, char** argv)
{
  (void)argv;
#ifndef Q_WS_WIN
  return ((int*)(&Q_WS_WIN))[argc];
#else
  (void)argc;
  return 0;
#endif
}

Determining if the Q_WS_QWS exist failed with the following output:
Change Dir: /home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp

Run Build Command:"/usr/bin/make" "cmTC_9a636/fast"
/usr/bin/make -f CMakeFiles/cmTC_9a636.dir/build.make CMakeFiles/cmTC_9a636.dir/build
make[1]: Entering directory '/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp'
Building CXX object CMakeFiles/cmTC_9a636.dir/CheckSymbolExists.cxx.o
/usr/bin/c++    -I/usr/include/qt4  -fvisibility=hidden -Wsign-compare -Wall -Wno-uninitialized    -o CMakeFiles/cmTC_9a636.dir/CheckSymbolExists.cxx.o -c /home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp/CheckSymbolExists.cxx
/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp/CheckSymbolExists.cxx: In function ‘int main(int, char**)’:
/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp/CheckSymbolExists.cxx:8:19: error: ‘Q_WS_QWS’ was not declared in this scope
   return ((int*)(&Q_WS_QWS))[argc];
                   ^~~~~~~~
CMakeFiles/cmTC_9a636.dir/build.make:65: recipe for target 'CMakeFiles/cmTC_9a636.dir/CheckSymbolExists.cxx.o' failed
make[1]: *** [CMakeFiles/cmTC_9a636.dir/CheckSymbolExists.cxx.o] Error 1
make[1]: Leaving directory '/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp'
Makefile:126: recipe for target 'cmTC_9a636/fast' failed
make: *** [cmTC_9a636/fast] Error 2

File /home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp/CheckSymbolExists.cxx:
/* */
#include <QtCore/qglobal.h>

int main(int argc, char** argv)
{
  (void)argv;
#ifndef Q_WS_QWS
  return ((int*)(&Q_WS_QWS))[argc];
#else
  (void)argc;
  return 0;
#endif
}

Determining if the Q_WS_MAC exist failed with the following output:
Change Dir: /home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp

Run Build Command:"/usr/bin/make" "cmTC_91ff3/fast"
/usr/bin/make -f CMakeFiles/cmTC_91ff3.dir/build.make CMakeFiles/cmTC_91ff3.dir/build
make[1]: Entering directory '/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp'
Building CXX object CMakeFiles/cmTC_91ff3.dir/CheckSymbolExists.cxx.o
/usr/bin/c++    -I/usr/include/qt4  -fvisibility=hidden -Wsign-compare -Wall -Wno-uninitialized    -o CMakeFiles/cmTC_91ff3.dir/CheckSymbolExists.cxx.o -c /home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp/CheckSymbolExists.cxx
/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp/CheckSymbolExists.cxx: In function ‘int main(int, char**)’:
/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp/CheckSymbolExists.cxx:8:19: error: ‘Q_WS_MAC’ was not declared in this scope
   return ((int*)(&Q_WS_MAC))[argc];
                   ^~~~~~~~
CMakeFiles/cmTC_91ff3.dir/build.make:65: recipe for target 'CMakeFiles/cmTC_91ff3.dir/CheckSymbolExists.cxx.o' failed
make[1]: *** [CMakeFiles/cmTC_91ff3.dir/CheckSymbolExists.cxx.o] Error 1
make[1]: Leaving directory '/home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp'
Makefile:126: recipe for target 'cmTC_91ff3/fast' failed
make: *** [cmTC_91ff3/fast] Error 2

File /home/user/workarea-gnuradio/gnuradio/build/CMakeFiles/CMakeTmp/CheckSymbolExists.cxx:
/* */
#include <QtCore/qglobal.h>

int main(int argc, char** argv)
{
  (void)argv;
#ifndef Q_WS_MAC
  return ((int*)(&Q_WS_MAC))[argc];
#else
  (void)argc;
  return 0;
#endif
}

How could I solve this issue?
Thanks so much!
Ivan



Con OpenStar hai Giga, SMS e i minuti che vuoi da 4,99€ al mese, per sempre. Cambi gratis quando e come vuoi e in più hai 6 mesi di INFINTY! http://tisca.li/myopen


reply via email to

[Prev in Thread] Current Thread [Next in Thread]