[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] CC1101 GFSK packet decode with variable length
From: |
Ed Criscuolo |
Subject: |
Re: [Discuss-gnuradio] CC1101 GFSK packet decode with variable length |
Date: |
Mon, 31 Dec 2018 15:27:10 -0500 |
But this would only work well if there is enough gap time and/or preamble bits
and/or fill bytes between the packets. Otherwise, you will consume and discard
the beginning of the next packet.
@(^.^)@ Ed
Sent from my iPhone
> On Dec 31, 2018, at 4:52 AM, Daniel Estévez <address@hidden> wrote:
>
> Hi,
>
> Besides using the Header Payload Demuxer as Julian suggested, a simple
> trick when the packet size is unknown but limited to a (not very large)
> maximum size is to cut a PDU with the maximum packet size and then throw
> away everything you don't need.
>