[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] Packet decoder does not output the last packet
From: |
CEL |
Subject: |
Re: [Discuss-gnuradio] Packet decoder does not output the last packet |
Date: |
Mon, 12 Nov 2018 12:16:31 +0000 |
Dear Ms. Williams,
I'm sorry you fell into that trap, but:
Packet Encoder/Decoder is known to be buggy. That's why it's in the
"deprecated" category. Simply don't use them.
You'll find a better example in the GNU Radio examples that were
shipped in /usr/share/gnuradio/examples/digital, specifically in
/usr/share/gnuradio/examples/digital/packet/packet_loopback_hier.grc
and the detailed packet_rx.grc and packet_tx.grc.
Best regards,
Marcus
On Sun, 2018-11-11 at 17:44 +0000, Williams, Diane wrote:
> In a very gnuradio simple simulation, flowgraph shown in attached image
> simple_udp_simulation, all packets sent to the UDP source are received by the
> UDP sink and sent out to a connected UDP socket server program.
>
> When adding the other processing blocks to the simulation, attached image
> udp_packet_encoder_gmsk_simulation, the last packet is received by the UDP
> source, but not by the UDP sink. That last packet never is output by the
> packet decoder. If I send one extra packet through, a dummy packet of the
> same length, then I get my last valid packet. I can do this and handle it in
> post-processing, if needed, when later that dummy packet, flows through, but
> I would appreciate knowing why the packet decoder hangs onto the last packet.
>
> I see the packet encoder/decoder deprecation warnings, but have not yet found
> a working example for other means of encoding and decoding.
>
> I am using Ubuntu 18.04 gnuradio packages 3.7.11
>
> Thank you.
>
>
>
> Diane Williams
> Senior Professional Research Assistant, Electrical Engineering
> University of Colorado Denver
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio