|
From: | Niloofar Toorchi |
Subject: | Re: [Discuss-gnuradio] E312 receiver gets stuck |
Date: | Mon, 19 Feb 2018 10:39:00 -0500 |
I had the same problem. Even when I built the flowgraph the problem remained.I think it’s coming from the stages related to signal clock/phase/frequency recovery. Most of these blocks are working as a state machine. For any reason, when the received signal power drops, they probably go to an unknown state.Unfortunately these blocks have no reset input to initialise them so what you have to do is to re-run the program.There might be a solution if you use code. But I haven’t used coding.Sincerely,Mansour.Hi All,I am using USRP E312. I used the available examples by Gnuradio, benchmark_{rx,tx}.py to have a simple communication between transmitter and receiver. I noticed that when the transmitter pauses sending, the receiver freezes somehow and when the transmitter resumes packet transmission, the receiver cannot receive anymore. Has any one experienced the same problem? Do you think building flowgarph can solve this issue?Thanks for your help,Niloofar_______________________________________________
Discuss-gnuradio mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
_______________________________________________
Discuss-gnuradio mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
[Prev in Thread] | Current Thread | [Next in Thread] |