|
From: | Bakshi, Arjun |
Subject: | Re: [Discuss-gnuradio] X310 with 2 WBX in full duplex |
Date: | Mon, 20 Nov 2017 19:14:09 +0000 |
That was it. I overlooked that setting your setup.
Hopefully the last issue. I'm still getting a lot of under flow errors when I use the same radio (A/B ) for a rx and tx block. I have a WBX daughter board in there so simultaneous rx-tx should not be a problem. As mentioned earlier, I was able to get 2rx-tx
links running at 5Msps previously with N210s.
Changing the buffer size, file size, or the sampling rate (not the 200e6 one) doesn't help.
Thank you,
AB From: Michael Carosino <address@hidden>
Sent: Monday, November 20, 2017 1:24:17 PM To: Bakshi, Arjun Cc: address@hidden Subject: Re: [Discuss-gnuradio] X310 with 2 WBX in full duplex I've had this error before, can't recall the solution however one thing to try is setting the DDC block select parameters. On the upper DDC block set block select to 0 and on the lower DDC set the block select to 1. (sometimes the auto-select
function fails to work correctly I think).
On Mon, Nov 20, 2017 at 10:14 AM, Bakshi, Arjun
<address@hidden> wrote:
|
[Prev in Thread] | Current Thread | [Next in Thread] |