[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] Error on GNUradio
From: |
Cinaed Simson |
Subject: |
Re: [Discuss-gnuradio] Error on GNUradio |
Date: |
Tue, 14 Nov 2017 16:09:19 -0800 |
User-agent: |
Mozilla/5.0 (X11; Linux i686; rv:52.0) Gecko/20100101 Thunderbird/52.4.0 |
Unplug the power to the hardware and plug it back in - cold reset- see
if happens again.
It could be something as simple as not enough power if you're not using
an external power supply.
-- Cinaed
On 11/14/2017 01:58 PM, Ricardo Nuszkowski wrote:
> Hello,
>
> We will be running a basic flow graph to test our antenna with the LimeSDR.
> The flowgraph is basically an osmocom source--> WX GUI waterfall sink.
>
>
> It will run perfectly fine for some operations and then every once in a
> while we will run it and get this error. It then works fine after we hit
> the reset button on the LimeSDR.
>
> We will get this error.
>
> Generating: '/home/ground/Documents/top_block.py'
>
> Executing: /usr/bin/python2 -u /home/ground/Documents/top_block.py
>
> gr-osmosdr v0.1.4-98-gc653754d (0.1.5git) gnuradio 3.7.11.1
> built-in source types: file osmosdr fcd rtl rtl_tcp rfspace soapy redpitaya
> [INFO] Make connection: 'LimeSDR-USB [USB 2.0] 9070602491E35'
> [1m [33m[WARNING] Gateware version mismatch!
> Expected gateware version 2, revision 11
> But found version 0, revision 0
> Follow the FW and FPGA upgrade instructions:
> http://wiki.myriadrf.org/Lime_Suite#Flashing_images
> Or run update on the command line: LimeUtil --update
> [0m
> [INFO] Device name: LimeSDR-USB
> [INFO] Reference: 30.72 MHz
> [INFO] Init LMS7002M(0)
> [INFO] Ver=0, Rev=0, Mask=0
>
> FATAL: ResetChip() failed
>
> Trying to fill up 1 missing channel(s) with null source(s).
> This is being done to prevent the application from crashing
> due to gnuradio bug #528.
>
>
> (top_block.py:4176): Gtk-WARNING **: gtk_widget_size_allocate(): attempt
> to allocate widget with width -5 and height 20
>
> (top_block.py:4176): Gtk-WARNING **: gtk_widget_size_allocate(): attempt
> to allocate widget with width -5 and height 20
>
> (top_block.py:4176): Gtk-WARNING **: gtk_widget_size_allocate(): attempt
> to allocate widget with width -5 and height 20
>
> (top_block.py:4176): Gtk-WARNING **: gtk_widget_size_allocate(): attempt
> to allocate widget with width -5 and height 20
>
>>>> Done (return code -9)
>
>
> Ocassionally, we also get this error as well:
>
> Generating: '/home/ground/Documents/top_block.py'
>
> Executing: /usr/bin/python2 -u /home/ground/Documents/top_block.py
>
> gr-osmosdr v0.1.4-98-gc653754d (0.1.5git) gnuradio 3.7.11.1
> built-in source types: file osmosdr fcd rtl rtl_tcp rfspace soapy redpitaya
> [INFO] Make connection: 'LimeSDR-USB [USB 2.0] 9070602491E35'
> [INFO] Reference clock 30.720 MHz
> [INFO] Device name: LimeSDR-USB
> [INFO] Reference: 30.72 MHz
> [INFO] Init LMS7002M(0)
> [INFO] Ver=7, Rev=1, Mask=1
> [INFO] LMS7002M calibration values caching Disable
> [1m [31m[ERROR] [0m
> [1m [33m[WARNING] SoapyLMS7::setSampleRate(): not a power of two factor:
> TSP Rate = 15.36 MHZ, Requested rate = 10 MHz [0m
> [1m [31m[ERROR] [0m
> [1m [31m[ERROR] [0m
> [1m [31m[ERROR] setBandwidth(Rx, 1, 30 MHz) Failed - [0m
>
> FATAL:
>
> Trying to fill up 1 missing channel(s) with null source(s).
> This is being done to prevent the application from crashing
> due to gnuradio bug #528.
>
> If anyone knows what is going on, that would be great.
>
> Ricardo
>
>
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>