|
From: | Santos Campos |
Subject: | [Discuss-gnuradio] B200/mini GPIO |
Date: | Fri, 10 Jun 2016 07:44:24 -0400 |
Santos,
I could not follow this.
Here's what I think you want:
- USRP Source => Other Blocks
- Your GPIO Block is on the side
In C++, pass a reference of the USRP source into your block. There, use
get_device() to return a multi_usrp::sptr. With that, you can do
whatever you want.
M
On 06/08/2016 11:06 AM, Santos Campos wrote:
> Ah sorry, I meant to mention I'm writing it in c++ not python.
> Yes, I saw that get_device() returns a sptr. I think I had a poor choice
> of words.
> I was unclear on how to even pass the existing usrp into my oot module,
> BUT I think I have a better idea now.
>
> Would something this work?:
> std::string args = "";
> ...
> uhd::usrp::multi_usrp::sptr dummy_usrp =
> uhd::usrp::multi_usrp::make(args); //okay to pass an empty string address?
> uhd::device::sptr usrp = dummy_usrp->get_device(); //creates a
> shared pointer to a usrp device created in an earlier block (usrp
> source, etc..)
> //reference usrp like normal
> This DID compile, but it'd be great to have reassurance from the gurus.
> I'm about to try it out as well.
> Although I'm a bit confused as to why I don't have to define
> get_device() since it's a virtual function. Did the layers of wrappers
> take care of it? (hopefully it's not embarrassingly obvious. My c++ fu
> is a little rusty)
>
> Y'all are awesome :),
> -Santos
>
> On Wed, Jun 8, 2016 at 12:12 PM, Martin Braun <address@hidden
> <mailto:address@hidden>> wrote:
>
> get_device() returns a shared pointer. Note this function is not exposed
> in Python -- you need to pass the object into another C++ object, and
> there call get_device().
>
> M
>
> On 06/08/2016 06:38 AM, Santos Campos wrote:
> > Hi, Martin!
> > I tried taking a peek at how the usrp sink might handle a preceding usrp
> > source (for inspiration).
> > Does it (and the way you described) declare a usrp device and do some
> > kind of shallow copy with the get_device() method?
> >
> > On Mon, Jun 6, 2016 at 5:54 PM, Martin Braun <address@hidden <mailto:address@hidden>
> <mailto:address@hidden>> <mailto:address@hidden> > <mailto:address@hidden <mailto:address@hidden>>> wrote:
> >
> > Nah, you can just pass in the existing one into your module and grab a
> > reference to the multi_usrp from there.
> >
> > M
> >
> > On 06/03/2016 12:57 PM, Santos Campos wrote:
> > > Hello again again!
> > > So I'm trying to write an OOT module to control the gpio from GRC.
> > > Would I have to create a usrp device in the module's code if I am using
> > > a usrp source?
> > > My gut says to probably not re-declare it since it's already in use, but
> > > I'm not sure how I could bring it into scope if I don't have to
> > > re-declare it.
> > > I tried poking around for the usrp sink code to see what it did but
> > > couldn't find it.
> > >
> > > On Wed, Jun 1, 2016 at 11:45 AM, Santos Campos <address@hidden <mailto:address@hidden>
> <mailto:address@hidden <mailto:address@hidden>>
> > > <mailto:address@hidden <mailto:address@hidden>
> <mailto:address@hidden <mailto:address@hidden>>>> wrote:
> > >
> > > Worked like a charm! Thanks for the helpful comments!
> > > Like I said originally, I'm trying to use the gpio to remotely
> > > switch between 2 antennas.
> > > Currently trying to familiarize myself with boost and the uhd api.
> > > Will undoubtedly be back to the listserv with questions on those.
> > >
> > >
> > > On Wed, Jun 1, 2016 at 11:23 AM, Marcus D. Leech <address@hidden <mailto:address@hidden>
> <mailto:address@hidden <mailto:address@hidden>>
> > > <mailto:address@hidden <mailto:address@hidden>
> <mailto:address@hidden <mailto:address@hidden>>>> wrote:
> > >
> > > On 06/01/2016 10:23 AM, Santos Campos wrote:
> > >> Hello again, all! I've finally come back to this after a while.
> > >> I'm trying to get the example code to compile but having some
> > >> trouble. Does anyone have any experience with using the uhd
> > >> gpio api?
> > >> I tried using this to compile:
> > >>
> > >> $ gcc -I/usr/include/boost
> > >> -I/home/santosec/uhd/host/include/uhd gpio.cpp -o gpio
> > >>
> > >> but I got a whole mess of compiler errors.
> > >>
> > >>
> > > And, to follow-up with details:
> > >
> > > http://files.ettus.com/manual/page_build_guide.html
> > >
> > > Also:
> > >
> > > AN-445 and AN-204 from here:
> > >
> > > https://kb.ettus.com/Application_Notes
> > >
> > >
> > >> On Wed, May 4, 2016 at 11:25 AM, Marcus D. Leech
> > >> <address@hidden <mailto:address@hidden>
> <mailto:address@hidden <mailto:address@hidden>>
> > <mailto:address@hidden <mailto:address@hidden>
> <mailto:address@hidden <mailto:address@hidden>>>> wrote:
> > >>
> > >> On 05/04/2016 11:18 AM, Santos Campos wrote:
> > >>> Hello! I am curious if it is possible to use a pin or
> > >>> something on either the B200 or B200 mini to send a
> > >>> control signal.
> > >>>
> > >>> We were hoping to be able to switch between 2 antennas if
> > >>> the board received some signal. It looks like there could
> > >>> be some available pins, but we were unsure if they would
> > >>> be able to fulfill our purpose. If not, any ideas around
> > >>> this issue would be welcome!
> > >>>
> > >>> Any help would be much appreciated!
> > >>>
> > >>>
> > >>> _______________________________________________
> > >>> Discuss-gnuradio mailing list
> > >>> address@hidden <mailto:address@hidden>
> > <mailto:address@hidden
> <mailto:address@hidden>
> > <mailto:address@hidden <mailto:address@hidden>>>
> > >>> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
> > >> The API for the B2xx GPIO is the same as for X3xx.
> > >>
> > >> There's example code:
> > >>
> > >> .../uhd/examples/gpio.cpp
> > >>
> > >>
> > >>
> > >> _______________________________________________
> > >> Discuss-gnuradio mailing list
> > >> address@hidden <mailto:address@hidden>
> > <mailto:address@hidden
> <mailto:address@hidden>> <mailto:address@hidden
> <mailto:address@hidden>
> > <mailto:address@hidden
> <mailto:address@hidden>>>
> > >>
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
> > >>
> > >>
> > >
> > >
> > >
> > >
> > >
> > > _______________________________________________
> > > Discuss-gnuradio mailing list
> > > address@hidden <mailto:address@hidden>
> <mailto:address@hidden <mailto:address@hidden>>
> > > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
> > >
> >
> >
> > _______________________________________________
> > Discuss-gnuradio mailing list
> > address@hidden <mailto:address@hidden>
> <mailto:address@hidden <mailto:address@hidden>>
> > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
> >
> >
>
>
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden <mailto:address@hidden>
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>
>
_______________________________________________
Discuss-gnuradio mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
[Prev in Thread] | Current Thread | [Next in Thread] |