|
From: | w xd |
Subject: | Re: [Discuss-gnuradio] Two usrp connected by mimo cable |
Date: | Fri, 29 Jan 2016 00:11:13 +0800 |
Thanks very much.1. If I connect two usrps by the mimo cable.Do you mean the transmitter and receiver also have the frequency offset if I don't use the 10MHz reference?2.Does the gnuradio have the related examples?Thanks so much.Sorry for my poor english if you don't understand.Thanks so much.2016-01-29 0:03 GMT+08:00 Marcus Müller <address@hidden>:Ah sorry ,I misread 2.
So, if you use only one USRP, then there's no frequency offset.
On 01/28/2016 05:02 PM, Marcus Müller wrote:
Hi xd,
1. yes
2. yes, unless you have a common 10MHz reference connected to both. That's what the MIMO cable is for.
3. the examples you're looking at.
On 01/28/2016 05:01 PM, w xd wrote:
Thanks so much.1.Is sbx support the full-duplex?2.If I use one pc and one usrp to realize the transmit and receive.Does the frequency offset exist?3.Have some related examples in grc which use one pc to control one usrp to realize the transmit and receive?Have some related examples in grc which use one pc to control two usrp connect by the mimo cable to realize the transmit and receive?
Best regards
2016-01-28 23:49 GMT+08:00 Marcus Müller <address@hidden>:
Yes you can do that. Also, most daughterboards you can use with the N2x0 are full-duplex capable, so you don't even need to use two USRPs.
On 01/28/2016 04:47 PM, w xd wrote:
Hi:Thanks so much.I want to realize the transmit and receive ofdm signal in one pc.Also I want to realize the synchronization.Just combine the tx_ofdm and rx_ofdm grc in one grc and just run?Any suggestion is grateful.Thanks.
2016-01-28 23:44 GMT+08:00 Marcus Müller <address@hidden>:
Yes. The MIMO cable forwards the data as if it was a network cable and a switch.
Best regards,
Marcus
On 01/28/2016 04:18 PM, w xd wrote:
Hi all,I want to use one pc to control two USRP to send and receive ofdm signals synchronization in the grc.One USRP is used as transmitter and the other one is used as receive.Can it be done by just connect two usrp by mimo cable?
Thanks in advance.
Best regards,zs
_______________________________________________ Discuss-gnuradio mailing list address@hidden https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
_______________________________________________
Discuss-gnuradio mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
[Prev in Thread] | Current Thread | [Next in Thread] |