Dose any one know what is the problem with this device.
Hardware NI USRP 2940R = x310
OS Ubuntu 14.04LTS
Connection SFP0
what are these warnings
X300 unknown product code in EEPROM: 2104
RX dboard ID: Unknown (0xffff)
./usrp_burn_mb_eeprom --read-all
linux; GNU C++ version 4.8.2; Boost_105400; UHD_003.008.002-80-ge28d7844
Creating USRP device from address:
UHD Warning:
X300 unknown product code in EEPROM: 2104
UHD Warning:
X300 unknown product code in EEPROM: 2104
-- X300 initialization sequence...
-- Determining maximum frame size... 1472 bytes.
-- Setup basic communication...
-- Loading values from EEPROM...
UHD Warning:
X300 unknown product code in EEPROM: 2104
-- Setup RF frontend clocking...
-- Radio 1x clock:200
-- Initialize Radio control...
-- Performing register loopback test... pass
UHD Warning:
Unknown transceiver board ID combination.
Is your daughter-board mounted properly?
RX dboard ID: Unknown (0xffff)
TX dboard ID: WBX v4 (0x0062)
-- Performing register loopback test... pass
UHD Warning:
Unknown transceiver board ID combination.
Is your daughter-board mounted properly?
RX dboard ID: Unknown (0xffff)
TX dboard ID: WBX + Simple GDB, WBX v3 + Simple GDB, WBX v4 + Simple GDB, WBX-120 + Simple GDB (0x004f)
-- Initializing clock and time using internal sources... done
Fetching current settings from EEPROM...
EEPROM ["revision"] is "52"
EEPROM ["product"] is "2104"
EEPROM ["mac-addr0"] is "00:80:2f:0a:f5:0c"
EEPROM ["mac-addr1"] is "10:80:2f:0a:f5:0d"
EEPROM ["gateway"] is "192.168.10.1"
EEPROM ["ip-addr0"] is "192.168.10.2"
EEPROM ["subnet0"] is "255.255.255.0"
EEPROM ["ip-addr1"] is "192.168.20.2"
EEPROM ["subnet1"] is "255.255.255.0"
EEPROM ["ip-addr2"] is "192.168.30.2"
EEPROM ["subnet2"] is "255.255.255.0"
EEPROM ["ip-addr3"] is "192.168.40.2"
EEPROM ["subnet3"] is "255.255.255.0"
EEPROM ["serial"] is "F54E25"
EEPROM ["name"] is ""