|
From: | Tom Rondeau |
Subject: | Re: [Discuss-gnuradio] USRP 1 overflow problem |
Date: | Thu, 20 Nov 2014 09:32:26 -0500 |
Hello All,
I have just started learning SDR and new to USRP as well for GNU radio.
SInce i am just a beginner, so i started with very basic examples benchmark_tx.py and benchmark_rx.py on USRP1.
I am using daughter board WBX.
I am getting an overflow problem both for receiver and uhd_fft as well. I tried to search on google but there was no clue for USRP1.
Please help me out to this very initial example problems.
Thank you, in advance.
Below is the command i am passing for tx and rx
benchmark_tx.py -a serial=49270a48 -f 2.2G -m gmsk -r 240 --tx-gain=20 --tx-amplitude=0.8
in another terminal for benchmark_rx i am passing this
benchmark_rx.py -a serial=4d05ac4b -f 2.2G -m gmsk -r 240 --rx-gain=20
forrx and alsofor uhd_fft it is printing the same oooooooo continues.
Thank you.
[Prev in Thread] | Current Thread | [Next in Thread] |