|
From: | Activecat |
Subject: | Re: [Discuss-gnuradio] Random number of output items |
Date: | Wed, 21 May 2014 13:52:29 +0800 |
Sorry about that I'll try to clarify thing.I'm using an rtl-sdr adapter to receive an RF signal. I demodulate it and send it through the MM clock recovery and bit slicer. Then the binary signal enters the block I'm talking about here.This block find a valid packet by matching the preamble and the sync pattern and translates the packet into another format that is understood by a software stack designed for these type of packets.Normally this stack would take it's input from a serial port but in my case I output the packets in the correct serial protocol through a file sink that is binded to a FIFO.
I'll take a look at the PDU block but this translation needs to be done between two very specific protocol. I don't think a generic block can achieve that.
[Prev in Thread] | Current Thread | [Next in Thread] |