Hi, just wanted to let you know that now, after pulling and building latest gr and gr-lte, it worked. Don’t know if from pulling, or if from chosing F6 instead of F5 within grc. Should it work with life reception, or only from a file? Maybe I’ll have a closer look later, now on board the train I do not want to play with a blinkenlight piece of naked SDR electronics J Ralph. From: Johannes Demel [mailto:address@hidden Sent: Wednesday, 18 December, 2013 18:47 To: Ralph A. Schmid, dk5ras Cc: address@hidden; discuss-gnuradio Subject: Re: [Discuss-gnuradio] gr-lte updated to GNU Radio 3.7 API unfortunately there are no screenshots yet. I guess it is a good idea to add some. After the estimator, there should be 2 blocks: Decode PBCH and Decode PCFICH. They take the same stream. and work in parallel. Then after Decode PBCH there is supposed to be a 'Decode BCH' block. These blocks may need some time to generate because they consist of hier blocks. That's kind of the tribute that has to be paid for a clean flowgraph. If you opened a flowgraph with missing blocks, as far as I know, to make the missing blocks appear you have to close and reopen at least this particular flowgraph. Happy hacking Johannes On Wed, Dec 18, 2013 at 3:49 AM, Ralph A. Schmid, dk5ras <address@hidden> wrote: Hi,
after opening and generating the hier blocks still the top_level.grc has missing blocks, at least LTE estimator outputs and unpack MIB inputs are unconnected, leaving a large white area in between. How should this flowgraph look like, is there a screenshot available somewhere?
Just wanted to put this all together in my lunch break, but seems too big for such a short break anyway :)
Ralph.
> -----Original Message----- > From: discuss-gnuradio-bounces+ralph=address@hidden [mailto:discuss-gnuradio-bounces+ralph=address@hidden] On Behalf Of > Johannes Demel > Sent: Sunday, 15 December, 2013 00:34 > To: discuss-gnuradio > Subject: [Discuss-gnuradio] gr-lte updated to GNU Radio 3.7 API > > Hello GNU Radio enthusiasts, > > some time after the GNU Radio 3.7 release I started to move the code for 'gr-lte' to the new API. Besides moving it to the new API, I > wanted to clean up code and rework a lot of tests. Thus, the whole transition took a lot of time and work. > Now, all current blocks are moved to the GNU Radio 3.7 API with lots of enhancements. e.g. I tried to remove all hierarchical python blocks > and created them as GRC hier blocks instead. Or runtime status events, like cell_id extraction, are all propagated through message ports > now. > Also, there is a PyBOMBS recipe now to ease the installation process. > > I hope 'gr-lte' can be useful for others. > > Source code is available at https://github.com/kit-cel/gr-lte > > Happy hacking > Johannes > > _______________________________________________ > Discuss-gnuradio mailing list > address@hidden > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
_______________________________________________ Discuss-gnuradio mailing list address@hidden https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
|