|
From: | nesimi eldarov |
Subject: | Re: [Discuss-gnuradio] FTW IEEE802.11a/g/p OFDM Frame Encoder |
Date: | Wed, 27 Nov 2013 20:02:50 +0400 |
Allocated virtual ethernet interface: tap0
You must now use ifconfig to set its IP address. E.g.,
$ sudo ifconfig tap0 192.168.200.1
Be sure to use a different address in the same subnet for each machine.
Can it be that I i have to configure ip address in a different way. I just type before executing:
$ sudo ifconfig eth0 192.168.10.1
On 27 Nov 2013, at 16:36, nesimi eldarov <address@hidden> wrote:
> Sorry, but It seems like you did not transmit ever, as I look in .grc files. As such, none of them send OFDM blocks...
> For example in ofdm_rx. you have a chain of operations, good and working. However there is nothing like that in the transmitter side.
> May be I make a mistake but I could not find anything which does the transmission which one could receiver back.
>
Did you try to install the hierarchical block from the examples folder?
[Prev in Thread] | Current Thread | [Next in Thread] |