[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] gnuradio-companion & hamlib bodging
From: |
Darren Long |
Subject: |
Re: [Discuss-gnuradio] gnuradio-companion & hamlib bodging |
Date: |
Sun, 28 Oct 2012 17:55:52 +0000 |
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:16.0) Gecko/20121011 Thunderbird/16.0.1 |
Never mind. I've bodged it directly in the generated python.
Darren
On 28/10/12 14:35, Darren Long wrote:
> Hi,
>
> In gnuradio-companion, I'm tring to control my KX3 transceiver using
> hamlib's rigctl utility.
>
> I've bodged a call to:
> float(pexpect.run("rigctl -m 229 -r /dev/ttyUSB0 -s 38400 f"))
> in a variable block's value, and then used that to set the wxgui
> waterfall sink's baseband frequency, which works but i'm trying to
> figure out 2 more things.
>
> 1) Can i do something similar to set the KX3's vfo frequency? a similar
> command to rigctl can be used if i can bodge the call into Freq Set
> Varname somehow.
>
> 2) Somehow i need to accommodate physical knobulation of the VFO on the
> radio, and keep the waterfall scale in sinc with the radio, i.e. by
> polling the same command i've used above. Is there any chance i can do
> that via similar bodging in gnuradio-companion, or, am I actually going
> to have to write actually write some code?
>
> Cheers,
>
> Darren, G0HWW
>
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio