[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] cannot make new signal processing block
From: |
Tom Rondeau |
Subject: |
Re: [Discuss-gnuradio] cannot make new signal processing block |
Date: |
Mon, 15 Oct 2012 10:23:55 -0400 |
On Fri, Oct 12, 2012 at 2:04 PM, nexy_sm <address@hidden> wrote:
> Python path is OK. Gnuradio works fine, I have tried some examples using GRC,
> etc.
Have you verified that that module is actually installed where you
think it is? If you are just building the gr-howto-write-a-block like
this:
cmake -DCMAKE_INSTALL_PREFIX=/opt/howto [path to source]/gr-howto-write-a-block
make && sudo make install
When you look in /opt/howto/lib/python2.7/dist-packages, you will find
a 'howto' directory. Under that, you'll find:
howto_swig.py
howto_swig.pyc
howto_swig.pyo
_howto_swig.so
__init__.py
__init__.pyc
__init__.pyo
All of those files have to be there. Then, if
PYTHONPATH=/opt/howto/lib/python2.7/dist-packages, you can 'import
howto' from inside Python.
Tom
> I also used gr-modtool like it was explained on the website.
> I haven't looked at swig interface file since it was not part of the
> tutorial, but I think it should have been generated correctly by gr-modtool.
>
> How can I check installation of the SWIG?
>
> Anyway I will not have chance to try anything until monday.
>
> Regards and thanks
>
>
>
> --
> View this message in context:
> http://gnuradio.4.n7.nabble.com/cannot-make-new-signal-processing-block-tp37924p37982.html
> Sent from the GnuRadio mailing list archive at Nabble.com.
>
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
- Re: [Discuss-gnuradio] cannot make new signal processing block, (continued)
- Re: [Discuss-gnuradio] cannot make new signal processing block, Martin Braun (CEL), 2012/10/09
- Re: [Discuss-gnuradio] cannot make new signal processing block, Nemanja Savic, 2012/10/09
- Re: [Discuss-gnuradio] cannot make new signal processing block, Martin Braun (CEL), 2012/10/10
- Re: [Discuss-gnuradio] cannot make new signal processing block, Tom Rondeau, 2012/10/10
- Re: [Discuss-gnuradio] cannot make new signal processing block, nexy_sm, 2012/10/11
- Re: [Discuss-gnuradio] cannot make new signal processing block, Tom Rondeau, 2012/10/11
- Re: [Discuss-gnuradio] cannot make new signal processing block, nexy_sm, 2012/10/12
- Re: [Discuss-gnuradio] cannot make new signal processing block, Tom Rondeau, 2012/10/12
- Re: [Discuss-gnuradio] cannot make new signal processing block, nexy_sm, 2012/10/12
- Re: [Discuss-gnuradio] cannot make new signal processing block, nexy_sm, 2012/10/15
- Re: [Discuss-gnuradio] cannot make new signal processing block,
Tom Rondeau <=
- Re: [Discuss-gnuradio] cannot make new signal processing block, nexy_sm, 2012/10/15
- Re: [Discuss-gnuradio] cannot make new signal processing block, Tom Rondeau, 2012/10/15
- Re: [Discuss-gnuradio] cannot make new signal processing block, nexy_sm, 2012/10/16
- Re: [Discuss-gnuradio] cannot make new signal processing block, Martin Braun (CEL), 2012/10/16
- Re: [Discuss-gnuradio] cannot make new signal processing block, nexy_sm, 2012/10/16
- Re: [Discuss-gnuradio] cannot make new signal processing block, Martin Braun (CEL), 2012/10/16
- Re: [Discuss-gnuradio] cannot make new signal processing block, Tom Rondeau, 2012/10/16
- Re: [Discuss-gnuradio] cannot make new signal processing block, nexy_sm, 2012/10/17
- Re: [Discuss-gnuradio] cannot make new signal processing block, nexy_sm, 2012/10/17
- Re: [Discuss-gnuradio] cannot make new signal processing block, Martin Braun (CEL), 2012/10/17