discuss-gnuradio
[
Top
][
All Lists
]
Advanced
[
Date Prev
][
Date Next
][
Thread Prev
][
Thread Next
][
Date Index
][
Thread Index
]
[Discuss-gnuradio] benchmark test between two USRPs have different perfo
From
:
Weixian Zhou
Subject
:
[Discuss-gnuradio] benchmark test between two USRPs have different performances in two directions
Date
:
Fri, 3 Aug 2012 15:45:01 -0400
I run benchmark_tx in USRP A, and benchmark_rx in USRP B:
A: ./benchmark_tx.py -f 2.46G -r 0.5M --tx-gain=-30
B: ./benchmark_rx.py -f 2.46G -r 0.5M
The n_right/n_recvd is 549/628.
But when I rx in USRP A and tx in USRP B with the same parameters, the n_right/n_recvd is always pretty bad: 0/275.
What might be the reasons?
I am using USRP N210 and XCVR2450.
--
Regards,
Weixian Zhou
reply via email to
[Prev in Thread]
Current Thread
[
Next in Thread
]
[Discuss-gnuradio] benchmark test between two USRPs have different performances in two directions
,
Weixian Zhou
<=
Re: [Discuss-gnuradio] benchmark test between two USRPs have different performances in two directions
,
Josh Blum
,
2012/08/04
Re: [Discuss-gnuradio] benchmark test between two USRPs have different performances in two directions
,
Weixian Zhou
,
2012/08/08
Re: [Discuss-gnuradio] benchmark test between two USRPs have different performances in two directions
,
Josh Blum
,
2012/08/08
Re: [Discuss-gnuradio] benchmark test between two USRPs have different performances in two directions
,
Weixian Zhou
,
2012/08/10
Prev by Date:
Re: [Discuss-gnuradio] Custom Blocks and Number of Items Per Port
Next by Date:
Re: [Discuss-gnuradio] Custom Block Issue
Previous by thread:
[Discuss-gnuradio] OFDM and SNR EST
Next by thread:
Re: [Discuss-gnuradio] benchmark test between two USRPs have different performances in two directions
Index(es):
Date
Thread