[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Discuss-gnuradio] Different amplitude on two USRPs
From: |
Jamie Wo |
Subject: |
[Discuss-gnuradio] Different amplitude on two USRPs |
Date: |
Tue, 22 May 2012 22:40:11 +1000 |
Hi all,
I met a werid problem when receiving. When I ran 'rx_samples_to_file' example to receive signal from a signal source, e.g. radio station, on two USRPN210s, the amplitude of received signals are different, seen from gnuplot.
Does anyone know why this happenes? I guess this is the problem of USRP, because I ran the same program, set the same parameters for 'rx_samples_to_file', receive the same signal source and the two USRP N210s were placed next to each other on the table.
Is there a way to set USRP/daughterboard so that the received signals have the same amplitude on two USRPs or adjust other parameters in gnuradio/uhd to do that?
Regards,
Jamie
- [Discuss-gnuradio] Different amplitude on two USRPs,
Jamie Wo <=
- Re: [Discuss-gnuradio] Different amplitude on two USRPs, mleech, 2012/05/22
- Re: [Discuss-gnuradio] Different amplitude on two USRPs, Jamie Wo, 2012/05/22
- Re: [Discuss-gnuradio] Different amplitude on two USRPs, mleech, 2012/05/22
- Re: [Discuss-gnuradio] Different amplitude on two USRPs, Jamie Wo, 2012/05/22
- Re: [Discuss-gnuradio] Different amplitude on two USRPs, mleech, 2012/05/22
- Re: [Discuss-gnuradio] Different amplitude on two USRPs, Jamie Wo, 2012/05/22
- Re: [Discuss-gnuradio] Different amplitude on two USRPs, mleech, 2012/05/22
- Re: [Discuss-gnuradio] Different amplitude on two USRPs, Jamie Wo, 2012/05/22