[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] Compile-time errors and coredumps disappeared, bu
From: |
Marcus D. Leech |
Subject: |
Re: [Discuss-gnuradio] Compile-time errors and coredumps disappeared, but WBX not accessible |
Date: |
Sun, 05 Feb 2012 16:54:30 -0500 |
User-agent: |
Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.2.24) Gecko/20111108 Fedora/3.1.16-1.fc14 Thunderbird/3.1.16 |
On 02/05/2012 04:43 PM, Jiri Pittner wrote:
Hi Ben,
good news - the cmake-built gnuradio does not crash. However, I am not
completely happy yet: when I try some WFM receive example, it always
reports "frequency out of range". I have WBX in side A and DBSRX in
side B of USRP1. uhd_usrp_probe recognizes this well:
You're confusing "--spec" and "-a":
Usage: usrp_wfm_rcv.py [options]
Options:
-h, --help show this help message and exit
-a ARGS, --args=ARGS UHD device address args [default=]
--spec=SPEC Subdevice of UHD device where appropriate
-A ANTENNA, --antenna=ANTENNA
select Rx Antenna where appropriate
-f FREQ, --freq=FREQ set frequency to FREQ
-g GAIN, --gain=GAIN set gain in dB (default is midpoint)
-V VOLUME, --volume=VOLUME
set volume (default is midpoint)
-O AUDIO_OUTPUT, --audio-output=AUDIO_OUTPUT
pcm device name. E.g., hw:0,0 or surround51 or
/dev/dsp
--freq-min=FREQ_MIN Set a minimum frequency [default=87900000.0]
--freq-max=FREQ_MAX Set a maximum frequency [default=108100000.0]
Try:
usrp_wfm_rcv.py -a "type=usrp1" -spec "A:0" -A RX2 --freq 92.5e6
Which will use the daughtercard in slot "A" with antenna "RX2" on a
"type=usrp1" device.
--
Marcus Leech
Principal Investigator
Shirleys Bay Radio Astronomy Consortium
http://www.sbrac.org
- Re: [Discuss-gnuradio] Compile-time error with boost-1.47 and with volk, (continued)
- Re: [Discuss-gnuradio] Compile-time error with boost-1.47 and with volk, Volker Schroer, 2012/02/03
- Re: [Discuss-gnuradio] Compile-time error with boost-1.47 and with volk, mleech, 2012/02/03
- Re: [Discuss-gnuradio] Compile-time error with boost-1.47 and with volk, Jiri Pittner, 2012/02/03
- Re: [Discuss-gnuradio] Compile-time error with boost-1.47 and with volk, Ben Hilburn, 2012/02/03
- Re: [Discuss-gnuradio] Compile-time error with boost-1.47 and with volk, Jiri Pittner, 2012/02/03
- Re: [Discuss-gnuradio] Compile-time error with boost-1.47 and with volk, Josh Blum, 2012/02/03
- Re: [Discuss-gnuradio] Compile-time error with boost-1.47 and with volk, Jiri Pittner, 2012/02/03
- Re: [Discuss-gnuradio] Compile-time error with boost-1.47 and with volk, Josh Blum, 2012/02/03
- Re: [Discuss-gnuradio] Compile-time error with boost-1.47 and with volk, Jiri Pittner, 2012/02/03
- Re: [Discuss-gnuradio] Compile-time errors and coredumps disappeared, but WBX not accessible, Jiri Pittner, 2012/02/05
- Re: [Discuss-gnuradio] Compile-time errors and coredumps disappeared, but WBX not accessible,
Marcus D. Leech <=
- Re: [Discuss-gnuradio] Compile-time errors and coredumps disappeared, but WBX not accessible, Jiri Pittner, 2012/02/05