|
From: | Marcus D. Leech |
Subject: | Re: [Discuss-gnuradio] Subject: Re: USRP testing plesae help |
Date: | Sat, 14 Jan 2012 09:13:46 -0500 |
User-agent: | Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.1.15) Gecko/20101027 Fedora/3.0.10-1.fc12 Thunderbird/3.0.10 |
On 14/01/12 07:33 AM, smith mark wrote:
DBSRX2 is only supported under UHD, not under the "classic" drivers. If you run: uhd_usrp_probe --args "type=usrp1" You'll find that it can cope with the DBSRX2 just fine. Since you're a new user of this gear, without any necessity of backwards compatibility with older software, you should be using UHD exclusively. The ethernet-connected devices (USRP2, N2XX) require 1 GiGe--they won't work at any other rate. Follow the instructions here to update your N2XX firmware: http://files.ettus.com/uhd_docs/manual/html/usrp2.html#load-the-images-onto-the-on-board-flash-usrp-n-series-only If you used the "build-gnuradio" script to build your Gnu Radio + UHD installation, it will also have downloaded the very latest master firmware, and placed it in /usr/local/share/uhd/images. You might also look at the overall UHD documentation here: http://code.ettus.com/redmine/ettus/projects/uhd/wiki#Documentation -- Principal Investigator Shirleys Bay Radio Astronomy Consortium http://www.sbrac.org |
[Prev in Thread] | Current Thread | [Next in Thread] |