Re: [Discuss-gnuradio] usrp2 on windows - network cable unplugged

[Marcus D. Leech]

On 08/17/2011 11:19 PM, Kyle Zhou wrote:

I tried to use usrp2 on windows with the newest sd card image. Worked on ubuntu.

But on windows, when I plug in the Ethernet cable and the power, initially windows shows acquiring network address, connected firewalled. After a few seconds, (I think it is when the image has been loaded from sd card to the mother board) windows shows ‘network cable unplugged’

I confirm it is a Gb network card.

What might be the cause of that?

 

 

You need to configure that particular network interface to use a *STATIC* IP address, and *NOT* try to
  acquire an address through DHCP.  Windows is trying to find a DHCP server on that interface, failing, and
  then declaring the interface "dead" as a result.

-- 
Principal Investigator
Shirleys Bay Radio Astronomy Consortium
http://www.sbrac.org