[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] Configuring the slave for MIMO cable
From: |
Josh Blum |
Subject: |
Re: [Discuss-gnuradio] Configuring the slave for MIMO cable |
Date: |
Wed, 10 Aug 2011 10:08:25 -0700 |
User-agent: |
Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.2.18) Gecko/20110617 Lightning/1.0b2 Thunderbird/3.1.11 |
On 08/10/2011 09:57 AM, Wes Rumble wrote:
> Hello,
> I'm trying to configure the slave device so I can use a MIMO cable with 2 of
> my USRP N210's. I see the application notes for the N210 where it says you
> need to configure the slave with:
>
> uhd::clock_config_t clock_config;
> clock_config.ref_source = uhd::clock_config_t::REF_MIMO;
> clock_config.pps_source = uhd::clock_config_t::PPS_MIMO;
> usrp->set_clock_config(clock_config, slave_index);
>
> My question is, where do I make these changes exactly? I found a clock
> config file that has syntax similar to this but nothing that matches it and
> I don't want to mess anything up. Any help is greatly appreciated, thanks!
I'm not sure what you are asking. If you make a quick flow graph in grc
and set the reference source to "mimo cable", generate the code, you can
inspect the code for how to do it in python.
-josh