[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Discuss-gnuradio] Building GNU Radio/GRC on the E100
From: |
Christopher Dean |
Subject: |
[Discuss-gnuradio] Building GNU Radio/GRC on the E100 |
Date: |
Fri, 1 Jul 2011 12:53:26 -0400 |
User-agent: |
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.18) Gecko/20110616 Lightning/1.0b2 Thunderbird/3.1.11 |
Hi All,
I am currently trying to build GNU Radio for my E100, including GRC. In
the process, I've run into a few issues:
- We don't have wxPython in the opkg repository. This is needed to use
flowgraphs in GRC, and although there is a text interface, the flowgraph
interface would be ideal. I saw that somebody had actually managed to
get flowgraphs in GRC on the E100, despite this. How would I go about
doing that?
- After the ./configure step, I received the following (see appended)
list of components that are going to be skipped. In the ./configure
call, I disable volk, usrp2, usrp1, and gr-video-sdl. The list that is
output is much longer, but is it correct? I haven't actually seen this
documented anywhere.
- GRC still is not showing up as successfully configured. I've followed
the steps listed here
(http://ettus-apps.sourcerepo.com/redmine/ettus/projects/usrpe1xx/wiki/FAQ#How-can-I-build-UHD-and-GNU-Radio-from-source)
and verified that I had all of the dependencies (excluding wxPython and
xmlto) listed here
(http://gnuradio.org/redmine/projects/gnuradio/repository/revisions/master/entry/README).
How do I fix this?
Thank you very much for your help. Best,
Chris
Appendix: Configuration Output
*********************************************************************
The following components were skipped either because you asked not
to build them or they didn't pass configuration checks:
usrp2-firmware
These components will not be built.
*********************************************************************
The following GNU Radio components have been successfully configured:
config
gruel
gnuradio-core
gr-msdd6000
gr-audio
gr-atsc
gr-cvsd-vocoder
gr-gsm-fr-vocoder
gr-noaa
gr-pager
gr-radio-astronomy
gr-trellis
gnuradio-examples
gr-uhd
docs
You my now run the make command to build these components.
*********************************************************************
The following components were skipped either because you asked not
to build them or they didn't pass configuration checks:
volk
gcell
usrp
usrp2
gr-usrp
gr-usrp2
gr-gcell
gr-comedi
gr-gpio
gr-radar-mono
gr-video-sdl
gr-wxgui
gr-qtgui
gr-sounder
gr-utils
grc
These components will not be built.
Configured GNU Radio release v3.4.0-3-g9bf36359 for build.
- [Discuss-gnuradio] Building GNU Radio/GRC on the E100,
Christopher Dean <=