[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] Issues in burning UHD images into SD card.
From: |
Josh Blum |
Subject: |
Re: [Discuss-gnuradio] Issues in burning UHD images into SD card. |
Date: |
Mon, 09 May 2011 23:11:41 -0700 |
User-agent: |
Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.2.17) Gecko/20110424 Lightning/1.0b2 Thunderbird/3.1.10 |
Sorry dude, wrong mailing list:
http://code.ettus.com/redmine/ettus/projects/uhd/wiki#Help-and-Support
-Josh
On 05/09/2011 10:48 PM, sumitstop wrote:
>
> Hi,
> I unluckily formatted the SD card given with USRP2 package.
> Now I am not knowing where to start.I have to use Matlab with USRP2.
> I went through the forums and I found that through UHD one can make the
> USRP2 interact with GNURadio,Labview,Matlab.For this UHD needed to be burnt
> on the SD card.
>
> Hence i downloaded it through the following link
>
> git clone git://code.ettus.com/ettus/uhd.git
>
> It said "initialized empty Git repository in /home/cogwsn/uhd/.git/"
>
> After that i checked that folder named uhd.
>
> There were four sub-folders in side that folder named
> firmware,fpga,host,imaes and a file also named fix-copyright-years.
>
> My question is that shall I burn all of them to the SD card using the
> command
>
> sudo <install-path>/share/uhd/utils/usrp2_card_burner_gui.py
>
> 1.If no then what has to be burnt and how.
>
> 2.If yes then I actually tried the above command but the GUI which popped
> out gives option to select the firmware and fpga images only.
>
> I already have downloaded the firmware and fpga images from the link
>
> http://code.ettus.com/redmine/ettus/projects/public/wiki/U2binaries
>
> The fpga image file is --->>>>Raw Ethernet rel-20100603 d488c6b2
> June 3,
> 2010
> and the firmware image file is --- >>>> Raw Ethernet, with XCVR2450
> v3.3.1git Jun 08, 2010
>
> I have XCVR2450 daughter board with me and I am using ubuntu10.10.
> I have landed in a total confusion.Wish i could havn't formatted the card :(
>
> I will appreciate very much if someone will tell me a step by step approach.
> (I am a windows guy and this ubuntu is giving a lot of pain :-( )
>
>
> I am desperate to run my code and transmit data through USRP2 but since 2
> days I am not even able to make the device working.
> :-(
>
> -----
> Sumit Kr.
> Research Assistant
> Communication Research center
> IIIT Hyderabad
> India