Marc Epard-3 wrote:
>
> Yesterday I did a ground-up install of GNU Radio for UHD. Since all the
> steps were kind of scattered around various websites and list posts, I
> thought I'd post them all in one place. Hopefully this'll make it easier
> for the next guy. This was on Ubuntu 10.04. You'll need all the
> prerequisites (e.g. cmake) first, of course. Corrections are welcome.
>
> mkdir ~/gnuradio-uhd
> cd ~/gnuradio-uhd
> git clone git://
ettus.sourcerepo.com/ettus/uhd.git
> git clone git://
gnuradio.org/gnuradio.git
>
> cd ~/gnuradio-uhd/uhd/host/
> mkdir build
> cd build
> cmake ../
> make
> make test
> sudo make install
> sudo ldconfig
>
> cd ~/gnuradio-uhd/gnuradio
> git branch --track next origin/next
> git checkout next
>
> ./bootstrap
>
> PKG_CONFIG_PATH=~/gnuradio-uhd/uhd/host/build/
> export PKG_CONFIG_PATH
> ./configure --enable-gr-uhd
>
> make
> make check
> sudo make install
> sudo ldconfig
>
> sudo ifconfig eth0 192.168.10.1 # substitute eth0 with the appropriate
> device.
>
> I used the GUI System->Preference->Network Connections to make the network
> setting permanent.
>
>