[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [Discuss-gnuradio] problem building next branch
From: |
Ulrika Uppman |
Subject: |
RE: [Discuss-gnuradio] problem building next branch |
Date: |
Mon, 24 Jan 2011 16:44:30 +0100 |
Doh! :)
I didn't think I had an old build on that location, but I did. It was stupid of
me not to try the standard solutions before, but "make distclean" did the trick
and everything works fine now. Thanks a lot for the quick reply!
Best regards,
Ulrika
> -----Original Message-----
> From: Tom Rondeau [mailto:address@hidden
> Sent: Monday, January 24, 2011 3:49 PM
> To: Ulrika Uppman
> Cc: address@hidden
> Subject: Re: [Discuss-gnuradio] problem building next branch
>
> On Mon, Jan 24, 2011 at 7:02 AM, Ulrika Uppman
> <address@hidden> wrote:
> > Hi,
> > I'm trying to build gnuradio with uhd on my system with
> Ubuntu 10.4. When building master branch everything seems ok,
> but I have some problems building the next branch of
> gnuradio. In gr-msdd6000/src/ there is an error where the
> compiler complains on "./python/msdd.cc: No such file or directory".
> >
> > I tested to revert to the latest revision that passed the
> build-test at hudson
> (31bbbec88b19230eb37b197d7623c3671e57837e) but then I got a
> version mismatch with the latest uhd master branch.
> >
> > I also tried to go back 1,2,...,5 commits of the next
> branch of the gnuradio code, but I got the same problem and
> didn't go any further on this reverse path. Instead I tried
> to fix the problem and replaced "python/msdd" with
> "python/msdd_rs" (which exist) in the Makefile.swig.gen file.
> This seemed to fix this problem, but only gave me another one
> in gr-atsc/src which wasn't that quick-fixable.
> >
> > Have anyone else had any problems building the next branch
> with uhd?
> > (I have myself built this branch successfully several times before,
> > but doesn't seem to have any luck on the latest revisions.)
> >
> > Best regards,
> > Ulrika
>
>
> Have you tried doing a "make distclean" and then restarting
> the build (./bootstrap && ./configure && make)?
>
> Also look at the "Dealing with old build problems" here:
> http://gnuradio.org/redmine/wiki/gnuradio/BuildGuide
>
> Tom
>