On Mon, Sep 13, 2010 at 9:30 PM,
<address@hidden> wrote:
Send Discuss-gnuradio mailing list submissions to
address@hidden
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
or, via email, send a message with subject or body 'help' to
address@hidden
You can reach the person managing the list at
address@hidden
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Discuss-gnuradio digest..."
Today's Topics:
1. USRP2, FPGA speed grade (Malihe Ahmadi)
2. Re: USRP2, FPGA speed grade (Josh Blum)
3. sync_and_start_rx_streaming_at (David Campbell)
----------------------------------------------------------------------
Message: 1
Date: Sun, 12 Sep 2010 13:03:03 -0600
From: Malihe Ahmadi <address@hidden>
Subject: [Discuss-gnuradio] USRP2, FPGA speed grade
To: address@hidden
Message-ID: <address@hidden>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Hi,
what is the speed grade of XC3S2000 FPGA on USRP2 board?
Thanks,
Malihe
------------------------------
Message: 2
Date: Sun, 12 Sep 2010 12:18:29 -0700
From: Josh Blum <address@hidden>
Subject: Re: [Discuss-gnuradio] USRP2, FPGA speed grade
To: address@hidden
Message-ID: <address@hidden>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
all project properties can be found here:
http://ettus-apps.sourcerepo.com/redmine/ettus/projects/uhd/repository/revisions/master/entry/fpga/usrp2/top/u2_rev3/Makefile.udp
On 09/12/2010 12:03 PM, Malihe Ahmadi wrote:
> Hi,
>
> what is the speed grade of XC3S2000 FPGA on USRP2 board?
>
> Thanks,
> Malihe
>
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
------------------------------
Message: 3
Date: Sun, 12 Sep 2010 14:41:53 -0700 (PDT)
From: David Campbell <address@hidden>
Subject: [Discuss-gnuradio] sync_and_start_rx_streaming_at
To: address@hidden
Message-ID: <address@hidden>
Content-Type: text/plain; charset=us-ascii
Hi All,
I have an issue with the pps syncing on the USRP2. If I call
sync_and_start_rx_streaming_at(0,0,0) then the function call will complete
about 1 out of 15 tries (so it just hangs in that call most of the time).
I've
looked at my pps signal going into the USRP2 and it is exactly what is
required. When the call does run to completion and data starts streaming it
looks like the timestamp counter is being set properly (i.e. set to 1) . Has
anyone run into this problem? I've experienced this on multiple USRP2s.
Thanks,
David
------------------------------
_______________________________________________
Discuss-gnuradio mailing list
address@hidden
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
End of Discuss-gnuradio Digest, Vol 94, Issue 13
************************************************