[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Discuss-gnuradio] Using the USRP1 for GOES LRIT reception...
From: |
Michael Kimzey |
Subject: |
[Discuss-gnuradio] Using the USRP1 for GOES LRIT reception... |
Date: |
Sun, 5 Sep 2010 13:03:05 -0400 |
Hello all.
I'm a bit of a noobie and getting my feet wet here. I hope to use my recently
received USRP1 to receive the GOES weather satellite LRIT data using software
from their site. (here: http://www.goes-r.gov/hrit_emwin/index.html )
First, I was wondering if there was anyone else out there interested in/doing
the same.
Second, I loaded up the software and followed the included directions (setting
environment variables, etc) but it seems that the firmware wouldn't load up.
(the USRP1 is installed and recognized by windows, though)
Here is the output:
--------------------------------------------------C:\Program Files\HRIT
Radio>emwinr
==========================
Tracking LIVE SATELLITE
Using ETTUS BOX
===========================
The current date is 09/05/10
The current time is 12:14:00
Clock.Frequency: 64.0 MHz
======================
ACQ-Engine ENABLED
======================
Can't find firmware: std_Aerospace.ihx
PATH= C:\Program Files\HRIT Radio
This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's support team for more information.
C:\Program Files\HRIT Radio>
---------------------------------------------------As an FYI, the required
firmware (std_Aerospace.ihx) is in this directory and has the exact same
spelling.
So, if anyone can offer some insight that would be cool. I'll also be asking
the developers and update this list if I hear anything.
Regards,
Mike
- [Discuss-gnuradio] Using the USRP1 for GOES LRIT reception...,
Michael Kimzey <=