Hello,
it's me for the third time.
I decided to try working with the uhd. I followed the instructions on
http://www.ettus.com/uhd_docs/manual/html/usrp2.html ,
but when the usrp2_card_burner(_gui).py finished it's work, I get the following
messages:
address@hidden:~/gnuradio/uhd/host/utils> sudo ./usrp2_card_burner.py
--dev=/dev/sdd --fpga=/home/gnuradio/USRP2_Images/USRP2/FPGA/u2_rev3-20100603.bin
root's password:
Burn fpga image:
1684+1 Datensätze ein
1684+1 Datensätze aus
862584 Bytes (863 kB) kopiert, 4,09834 s, 210 kB/s
Verification Failed:
2048+0 Datensätze ein
2048+0 Datensätze aus
1048576 Bytes (1,0 MB) kopiert, 1,33575 s, 785 kB/s