[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] question of dual transmitter/receiver
From: |
Fisheep |
Subject: |
Re: [Discuss-gnuradio] question of dual transmitter/receiver |
Date: |
Mon, 26 Jul 2010 06:58:58 -0700 (PDT) |
Hi,
Sorry for my unclear suggestion before.
In the "fm_tx_2_daughterboards.py" code, just refer to the code of USRP
setting and make the same change for benchmark_tx.py.
The code start from
# ----------------------------------------------------------------
# Set up USRP to transmit on both daughterboards
self.u = usrp.sink_c(nchan=2) # say we want two channels
....
self.subdev = (self.u.db(0, 0), self.u.db(1, 0))
...
self.u.set_mux(0xba98)
...
# ----------------------------------------------------------------
And the setting of USRP1 of benchmark_tx.py
(/gnuradio-examples/python/digital/.) is in usrp_transmit_path.py.
But I remember that the new version of gnuradio hides the USRP setting in
the files of usrp_options.py (/gnuradio-core/src/python/.) and
generic_usrp.py (/gnuradio-core/src/python/blks2impl/.)
If you want to modify these two files, I think it is a little bit difficult.
Maybe you have to construct a new USRP setting in usrp_transmit_path.py.
The setting of "set_mux" seems different for tx and rx, but I don't know the
exact reason. Sorry.
I am not sure whether this information is what you want. Hope this helps.
Fisheep
YouheiFujii wrote:
>
> Hi,
>
> Thank you for your advice.
>
> >It seems you have two daughterboards on one USRP1, and you want to
> communicate with these two daughterboards.
> Yes, that's right.
>
> I want to use my dual-db program in /usr/share/example/digital.
> I saw "fm_tx_2_daughterboards.py", but that program isn't use digital's
> py-files and modules.
>
> When I search, I saw the function "set_mux".
> I tried use "set_mux", but I didn't do that well.
>
> If does anyone have experience of making program which on dual-db on
> 1-USRP1,
> please give me advice.
>
> I have to do well in few days ;-
>
>
> Thanks,
> youhei
>
> (2010/07/26 21:55), Fisheep wrote:
>> Hi,
>>
>> It seems you have two daughterboards on one USRP1, and you want to
>> communicate with these two daughterboards.
>> Maybe you could take a look at fm_tx_2_daughterboards.py first(in
>> /gnuradio-examples/python/usrp/.).
>> > From your code, I think you didn't modify the USRP setting that causes
>> your
>> code fail.
>>
>> Hope that helps,
>>
>> Fisheep
>>
>
> _______________________________________________
> Discuss-gnuradio mailing list
> address@hidden
> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>
>
--
View this message in context:
http://old.nabble.com/question-of-dual-transmitter-receiver-tp29253936p29266829.html
Sent from the GnuRadio mailing list archive at Nabble.com.