|
From: | Elvis Dowson |
Subject: | Re: [Discuss-gnuradio] Can't locate gr-uhd component |
Date: | Fri, 16 Jul 2010 17:33:06 +0400 |
Hi Manuel, Thanks for the reply. I tried burning the matched FPGA and firmware images onto the SD card, but the LED lights don't blink any more. Here are the command fragments that I used to write the two images, in succession onto the SD card Write the new FPGA image to the SD card: $ cd uhd/host/utils $ sudo ./usrp2_card_burner.py --dev=/dev/sdb --fpga=/home/elvis/Downloads/usrp2-image/u2_rev3_uhd_20100706.bin Write the new firmware image to the SD card: $ sudo ./usrp2_card_burner.py --dev=/dev/sdb --fw=/home/elvis/Downloads/usrp2-image/txrx_uhd_20100706.bin Best regards, Elvis |
[Prev in Thread] | Current Thread | [Next in Thread] |