[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] USRP2 + WBX: Unable to receive FM signals
From: |
Elvis Dowson |
Subject: |
Re: [Discuss-gnuradio] USRP2 + WBX: Unable to receive FM signals |
Date: |
Thu, 15 Jul 2010 22:53:29 +0400 |
Hi Josh,
On Jul 15, 2010, at 10:36 PM, Josh Blum wrote:
> 0x0052 should be the id of the WBX RX side. Let me know how it goes, and send
> back the patch!
Maybe it's 0x0053, because that's what the program reports it is using:
$ ./usrp2_wfm_rcv.py -e eth2
Using RX d'board 0x0053
>>> gr_fir_ccf: using SSE
>>> gr_fir_fff: using SSE
aUaUaUaUaUaUaUaUaUaUaUaUaUaUaUaUaUaUaUaUaUaUaUaUaUaUaUaUaUaUaUaUaUaU
However, I get nothing but static when I run the program. What could be wrong?
I tried connecting the antenna to both J3 and J2, and I still get static.
Elvis Dowson
- [Discuss-gnuradio] USRP2 + WBX: Unable to receive FM signals, Elvis Dowson, 2010/07/15
- Re: [Discuss-gnuradio] USRP2 + WBX: Unable to receive FM signals, Josh Blum, 2010/07/15
- Re: [Discuss-gnuradio] USRP2 + WBX: Unable to receive FM signals,
Elvis Dowson <=
- Re: [Discuss-gnuradio] USRP2 + WBX: Unable to receive FM signals, Elvis Dowson, 2010/07/15
- Re: [Discuss-gnuradio] USRP2 + WBX: Unable to receive FM signals, Elvis Dowson, 2010/07/15
- Re: [Discuss-gnuradio] USRP2 + WBX: Unable to receive FM signals, Alexandru Csete, 2010/07/15
- Re: [Discuss-gnuradio] USRP2 + WBX: Unable to receive FM signals, Elvis Dowson, 2010/07/16
- Re: [Discuss-gnuradio] USRP2 + WBX: Unable to receive FM signals, Elvis Dowson, 2010/07/16
- [Discuss-gnuradio] USRP digital downconverters, bjoernm, 2010/07/16
- Re: [Discuss-gnuradio] USRP digital downconverters, Thomas Tsou, 2010/07/18