[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] USRP2 and Data Rate
From: |
Marcus D. Leech |
Subject: |
Re: [Discuss-gnuradio] USRP2 and Data Rate |
Date: |
Wed, 07 Jul 2010 11:45:56 -0400 |
User-agent: |
Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.1.9) Gecko/20100430 Fedora/3.0.4-2.fc12 Thunderbird/3.0.4 |
On 07/07/2010 11:32 AM, Garrett Wenger wrote:
> Hi all,
> A few days ago I made a simple program using grc to fsk modulate and
> transmit a pn sequence at 10kbps. Since I was using a USRP1, I set my
> samples per symbol to 25 and the interpolation to 512 to get this data
> rate.
>
> The place I work at just received a couple USRP2's, so I am trying to
> get this same program working with the new devices. I realize that
> the DAC rate for the USRP2 is 100 MS/s instead of 128 MS/s, so I
> changed the samples per symbol and interpolation rate to 25 and 400,
> respectively, but this does not give me the 10kbps rate like I
> expected it would.
>
> Is there something major that I am missing here?
>
> Thanks a lot,
> Garrett
Garrett:
The DACs on the USRP2 run at 400Msps, not 100Msps. Although the *ADCs*
on the USRP2 do run
at 100Msps, and that's perhaps where the confusion comes in.
--
Marcus Leech
Principal Investigator
Shirleys Bay Radio Astronomy Consortium
http://www.sbrac.org